Jump to content
SAU Community

Recommended Posts

1993 Maroon R33 Skyline GTST

RB25DET ( 92,000kms ) motor freshened up 20,000kms ago

Link G1 Ecu with 3 bar map sensor

KKR480 Turbo

Greddy Plenum

700cc injectors

Intercooler 600x300x75

Custom 3" dump>exhaust

Walbro intake pump ( direct wired in with relay )

Exceedy Cushion 5puk button clutch

G4 adjustable coilovers

Greddy TypeS bov ( original )

20% tint on side and 35% front

Stock 16" wheels with good tyres all round

blitz turbo timer/boost gauge

mp3 head unit and alpine speakers all round

Dont want to sell the car but im really after something 4door and auto and attracts less attention.

car will come with 6 months reg and a rwc ( no the plates dont come with car )

needs a proper tune from a performance shop in brisbane or goldie, but last tune i had was 308rwhp, could get more out of it with a decent tuner

asking $14,000

PM me if your interested.

post-29137-1210641836_thumb.jpg

post-29137-1210641850_thumb.jpg

Edited by l0WRB
Link to comment
https://www.sau.com.au/forums/topic/218950-r33-skyline-gtst/
Share on other sites

would u get it tuned before inspection? i have cash and im ready to buy, but i wont buy anything with promises like "yeah that problem will be fixed with a tune just havent had time/lazy' i want to see it running smooth first time or i keep looking lol hell put the tune on the price if i like it ill buy it

  • 3 weeks later...

Sorry i forgot to reply to this thread lol

john a few tunes have been done on this car, first andrew glassy back wen i got the ecu, then done a few more mods and brad from the bay tuned it, then glassy re tune it again

i just wouldnt mind a decent tune from brisbane workshop.

Jumz u have a pm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
    • The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
    • Well, your RB20 ECU loom won't have wires for the boost solenoid, that boost sensor, and possibly one or two other things. There could be differences in seemingly random things like the charcoal canister purge solenoid, because the 25DET has to handle boost in the vacuum system and the 20DE does not. I don't know - I haven't looked. It is very likely that all the most important things are same-same, being the main sensors like AFM, CAS, etc, and the injectors and ignition. Not that you'll need the AFM for the Haltech anyway. I would suggest that you would seriously want to sit down with the pinouts for both ECUs and just go through them and highlight green what is the same, orange what is different/missing, and make a plan from there. It's not going to be difficult. It will either be the same or need to be fixed.
    • yeaaa that's why I haven't done any wiring to the stock ecu harness because I have the haltech, but then that leads me to the other question of "is the pnp harness really plug and play?" or would I have to still switch some pins/wires over because the pnp is for the rb25det neo harness, and not for the rb20de neo harness. was really hoping to find something to spoon feed me since so many people have done rb20neo + t conversions, but man this is rough.
×
×
  • Create New...