Jump to content
SAU Community

Recommended Posts

Ok here it goes,

saturday nite just gone, me and my mates in my line cruising to this party that we new of threw girls that we no and were at the party. enyway my mate was drivin my car i was far to maggot lol, we cruised up the street of the party there was ppl everyware sitting on the side of the road, we were just drivin past to say hi, when as we were leavin this absolute weeneer boots the shit out of my car as we were leaving!!!! i was fuming i was gonna get out and kill the little prick, but thought id do the right thing and just carry on and pull over called the cops. the cops arrived and said nothing is going to happen bout this u guys tresspased!!! wat the f**k is with that? enyway i no who the little bugger is and he is gonna pay. enuf bout that, enybody no good dent removalists?? any help would be appreciated,

cheers

joel

Link to comment
https://www.sau.com.au/forums/topic/219080-dent-removalists/
Share on other sites

...

Thats a bit f*cked up....

At least you know who it is.. so u can get money out of the guy...

Got pics? if we can see the damages might be easier to recommend someone...

Edited by br3ndan

if its a decent dent, they will most likely need to weld a piece of metal onto the panel so they can use a "dent puller", so you'll need to to be sprayed aswell. Probably looking around the 300-500 mark, definately get the money out of the kid, otherwise make him eat his own teeth

Thread has no direction and the threat of retaliation in not what SAU / SAUWA is about.

If you know the guy, take it up with the Police, not on a public Interweb Forum.

Use the consolidated Workshop Thread.

Mike

Closed

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...