brembogtr Posted May 13, 2008 Share Posted May 13, 2008 hi sau members need help with installing my hks dli twin power into my gtr i have the loom coming from the twin power unit that goes to the ignitor but do i need anything else? and which spark plugs should i be using with this unit? Link to comment https://www.sau.com.au/forums/topic/219113-hks-twin-power-dli-whats-needed-to-install-what-sparkplugs-to-use/ Share on other sites More sharing options...
godzl1975 Posted May 14, 2008 Share Posted May 14, 2008 did u get the loom made specific for RB26? or just the loom that came with the CDI kit?...if u have the specific loom just plugging it in, n loacting a place for the unit. if not the if will have to splice in the orig loom, which can be a bit of a pain. and spark plugs everyone has their own preference, ive got NGK platniums. hope that helps Link to comment https://www.sau.com.au/forums/topic/219113-hks-twin-power-dli-whats-needed-to-install-what-sparkplugs-to-use/#findComment-3864924 Share on other sites More sharing options...
iamsog11 Posted September 6, 2012 Share Posted September 6, 2012 i am having ignition breakdown problems. i am running super spark coils on my motor and getting spark blowout. does anyone know if this hks twin power could solve my problem or do i need to get a CDI. Im running a rb26 @ 2 bar on E85 with a Vipec ECU running wasted spark. thanks Link to comment https://www.sau.com.au/forums/topic/219113-hks-twin-power-dli-whats-needed-to-install-what-sparkplugs-to-use/#findComment-6520593 Share on other sites More sharing options...
KiwiRS4T Posted September 6, 2012 Share Posted September 6, 2012 I don't see many people supporting super spark coils. See if you can borrow a set of new OEM coils or Splitfires and see if that fixes your problem. Link to comment https://www.sau.com.au/forums/topic/219113-hks-twin-power-dli-whats-needed-to-install-what-sparkplugs-to-use/#findComment-6520707 Share on other sites More sharing options...
iamsog11 Posted September 7, 2012 Share Posted September 7, 2012 ive tried my oem Coils and it does the same thing. Anyone else have gotten good results with the HKS Twin power? Link to comment https://www.sau.com.au/forums/topic/219113-hks-twin-power-dli-whats-needed-to-install-what-sparkplugs-to-use/#findComment-6523382 Share on other sites More sharing options...
SiR_RB Posted September 7, 2012 Share Posted September 7, 2012 Seems like afew high powered high boost cars run them...you may need to get it wired properly Or run good coilpacks as stated above.. On a side note how much did you pick the twin spark up for? Link to comment https://www.sau.com.au/forums/topic/219113-hks-twin-power-dli-whats-needed-to-install-what-sparkplugs-to-use/#findComment-6523386 Share on other sites More sharing options...
XRATED Posted September 8, 2012 Share Posted September 8, 2012 Loose the 'super cheaps/sparks' coil packs and get some splitfires or oem coilpacks. Go through the usual wiring checks and upgrades. Make sure you gap the plugs down to .7mm I personally didn't go with an HKS dli... It's a bit gimmicish. Cheers Justin I went to a cdi unit. Link to comment https://www.sau.com.au/forums/topic/219113-hks-twin-power-dli-whats-needed-to-install-what-sparkplugs-to-use/#findComment-6523787 Share on other sites More sharing options...
Piggaz Posted September 8, 2012 Share Posted September 8, 2012 Took my Twin spark off and ran a Unigroup Ignitor box, runs a lot better. Waste of time. Link to comment https://www.sau.com.au/forums/topic/219113-hks-twin-power-dli-whats-needed-to-install-what-sparkplugs-to-use/#findComment-6523813 Share on other sites More sharing options...
sky30 Posted September 9, 2012 Share Posted September 9, 2012 Took my Twin spark off and ran a Unigroup Ignitor box, runs a lot better. Waste of time. In what way does it run better? I thought the hks twinpower was a good unit, there is a lot of good results with them. Is the Unigroup box a cdi? Link to comment https://www.sau.com.au/forums/topic/219113-hks-twin-power-dli-whats-needed-to-install-what-sparkplugs-to-use/#findComment-6525213 Share on other sites More sharing options...
jangles Posted September 9, 2012 Share Posted September 9, 2012 Isnt it more so the spark units only mask the trigger issue at higher revs? Link to comment https://www.sau.com.au/forums/topic/219113-hks-twin-power-dli-whats-needed-to-install-what-sparkplugs-to-use/#findComment-6525252 Share on other sites More sharing options...
Piggaz Posted September 10, 2012 Share Posted September 10, 2012 In what way does it run better? I thought the hks twinpower was a good unit, there is a lot of good results with them. Is the Unigroup box a cdi? I've been through 3 sets of coils with that stupid thing. One set lasted less than 2000 kms. Ripped it off and no problems. The Unigroup box is a ignitor replacement. Link to comment https://www.sau.com.au/forums/topic/219113-hks-twin-power-dli-whats-needed-to-install-what-sparkplugs-to-use/#findComment-6526207 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now