Jump to content
SAU Community

Recommended Posts

hi sau members

need help with installing my hks dli twin power into my gtr

i have the loom coming from the twin power unit that goes to the ignitor but do i need anything else?

and which spark plugs should i be using with this unit?

did u get the loom made specific for RB26? or just the loom that came with the CDI kit?...if u have the specific loom just plugging it in, n loacting a place for the unit.

if not the if will have to splice in the orig loom, which can be a bit of a pain.

and spark plugs everyone has their own preference, ive got NGK platniums.

hope that helps

  • 4 years later...

i am having ignition breakdown problems. i am running super spark coils on my motor and getting spark blowout. does anyone know if this hks twin power could solve my problem or do i need to get a CDI. Im running a rb26 @ 2 bar on E85 with a Vipec ECU running wasted spark. thanks

I don't see many people supporting super spark coils. See if you can borrow a set of new OEM coils or Splitfires and see if that fixes your problem.

Seems like afew high powered high boost cars run them...you may need to get it wired properly

Or run good coilpacks as stated above..

On a side note how much did you pick the twin spark up for?

Loose the 'super cheaps/sparks' coil packs and get some splitfires or oem coilpacks.

Go through the usual wiring checks and upgrades.

Make sure you gap the plugs down to .7mm

I personally didn't go with an HKS dli... It's a bit gimmicish.

Cheers

Justin

I went to a cdi unit.

  On 08/09/2012 at 8:33 AM, Piggaz said:

Took my Twin spark off and ran a Unigroup Ignitor box, runs a lot better.

Waste of time.

In what way does it run better?

I thought the hks twinpower was a good unit, there is a lot of good results with them.

Is the Unigroup box a cdi?

  On 09/09/2012 at 9:17 PM, sky30 said:

In what way does it run better?

I thought the hks twinpower was a good unit, there is a lot of good results with them.

Is the Unigroup box a cdi?

I've been through 3 sets of coils with that stupid thing.

One set lasted less than 2000 kms. Ripped it off and no problems.

The Unigroup box is a ignitor replacement.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nice. I'm looking forward to the updates!
    • Ayooo, been a while mates. I have a s2 r33 gtst and air stopped coming out of all the top vents.   My car has always made an actuator gear noise when turning the car on but that's a different issue I think? Did searches and am at process of thinking it's an actuator or some type of motor? I see a few different actuators and don't know which one. Would be nice to know if it was the one that's under the steering wheel so the dash doesn't need to come out.
    • Hi, just checking. Did you get this stuff made by Vspec Performance and at what price roughly? Looking into (sometime later) also getting such a intake kit, and Trust as well as HKS don't make a full set like this anymore.
    • 2025 Update PRP RB30 Black and Crank Shipped from Austrailia made it and was sent off to the machine shop. -700 to 800hp Service was done to the Block, which included: Inspection Prep and Black Brace to convert engine to 4wd oil Pan  Crank Fully prepped for 1000hp PRP RB30 timing belt kit w/ ALL options Nitto Pistons Nitto I-Beam Rods Nitto Oil Pump New OEM Nissan RB26 Cylinder Head Shipped Supertech intake and exhaust Valves over-sized Kelford 272 cams Mild Lift Nitto Headgasket All of the machine work is completed and next step is assembly and dropping in the new motor.   Upgrades (Changes) from the previous build: Engine Management - no longer using ECUMasters. Haltech Platinum Pro Turbo - Went from twin HKS 2530s with upgraded wheels to BW362SX-E Fuel - 1000cc injectors to ID1430x Single in tank Walbro 450 to Radium External Surge Tank w/ 2x Walbro 450s     I am looking to be back on the road by the end of summer. Wish me luck! monthly updates should be coming!    
    • Realised I never posted this , also I never got a price 
×
×
  • Create New...