Jump to content
SAU Community

Recommended Posts

Hi guys,

I have been talking with the guys at MazFix and I am arranging them to come down from QLD for to perform some dyno tunes.

MazFix's Site

MazFix are the QLD branch of Microtech.

Here is their Microtech Site

Microtech-EFI

This is the NSW Microtech Site

MicrotechEFI

I have been speeking with Brock and Archie the owner of MazFix about this.

We basiclly need a decent confirmed list of people who want tunes before it will be worth while getting them here to perform dyno tunes.

We are unsure of pricing at the moment but MazFix normally charge $350 for a full dyno tune, ofcourse we have to add the rental charge for the dyno and cost to get them here and accomodation etc. But even if it ends up being double their normal price it is WELL worth it.

They one of the fastest RX7s in Australia:

2004 June

Winternationals Willobank Raceway

6.99sec @ 201.52mph

1st Rotor in the world to break 200mph

1st Rotor in Australia to break into 6 sec

They can pretty much tune any thing from Microtechs to PowerFCs to wolf3D... every thing pretty much.

I was also told that they have to proper japanese dyno tune software for the PowerFCs not the same software that most tuners use.

I am still confirming were we will be performing the dyno tune as I am still organising this.

I am after big numbers and drivability with my Microtech LT12s controlled RB30DET and I don't think I will be able to get a tune that is even close to mazfix's effort from a local tuner.

If you are seriously interested please post bellow so I can report back to MazFix.

Edited by Finny
Link to comment
https://www.sau.com.au/forums/topic/219189-who-wants-a-pro-dynotune-in-hobart/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Starting with issues 1 - 5, we have already run into a problem...!  Issue #4 contained 2x front brake calipers, instead of 1 caliper and 1x steering knuckle. Will have to call DeAgostini on Monday to sort it out. Anyway here's some photos.  Issue #1 is the front bumper, headlights and number plate. Issue #2 is the front wheel (with "We produced with spartan air." text on the centre cap!) and tyre, the front lip spoiler and cylinder head cover with ignition coils under the centre cover... which will never be seen again. Issue #3 is the bonnet and cylinder head. Issue #4 is the front strut, brake disc (with laser etched metal discs) and brake caliper. I stopped here because of the issue with the missing steering knuckle.  Next update will be #5 - #10 in a few weeks.
    • DeAgostini is one of a few companies that release quite large (the largest commonly available size actually) 1/8 scale models in a series of weekly issues over 100 - 110 instalments.  They release different models for different markets and DeAgostini Japan have release the BNR32 Skyline GT-R Nismo last month. I've made two of these 1/8 scale sized cars (one an R35 GT-R from 2012 - 2014, the other I'm just about halfway through, a BNR34 Skyline GT-R from the 2Fast 2Furious movie) so when this R32 was announced there was no way I could ignore it as it's my favourite out of all Nissans.  Each issue costs around $20 so it costs about $2.2K when completed. I suppose it is very expensive for what it is, but the quality and details are really very good, and there are many "gimmicks" like fully functioning exterior and interior lights operated with a remote control, working steering, all doors/bonnet/boot/fuel lid open and close, the side mirrors fold in and it even has a speaker for the engine revving sounds when you turn the lights on.  Each issue comes with a magazine that tells the story of the BNR32 Skyline GT-R Nismo from the first design stages of the BNR32 to Group A homologation and the various racing version that were run in the Japanese Group A and JGTC, and Australian Group A.  So I plan to update the build in this thread 5 issues at a time.  https://deagostini.jp/r32/?srsltid=AfmBOooKjxDc4EUK2rmXqMBPgyHfFJ24s4oEPJBNpnF-lFlsRoW0PE6P
    • As per title.. has anyone used so far? Keen to hear results, comparisons. In the market for a new mani for my new turbo. Any issues cracking?
    • Re read everything that has been written about this in this thread.. Let us know if you're still confused.
    • This would be a new pump with new gears. I'm just unclear on whether it's a good idea to run more oil pump flow if you don't actually need said flow. Oil level is set a minute or so after shutting off a warm engine so wouldn't the high RPM oil level in the sump end up lower all things equal? Plan is OEM clearances, main concern in my mind is whether the OEM pump can keep up with the flow requirements of any additional oil coolers.
×
×
  • Create New...