Jump to content
SAU Community

Recommended Posts

RB sounding like WRX = running on 5 or less cylinders.

Turbo should be fine, as I don't think it effects idle... more likely gasket on intake plenum gone bad, or coilpack/dead plug/sparkplug loom problem in one or more cylinders.

But I agree with Mike, don't drive it if its acting that erratic.

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

hey mate,

my housemate drives a WRX MY98, and his car is giving him some problems similar to yours eversince he got the car, which was about

one week ago. Sometimes the engine just idle below 1000RMP and it feels as if its choking and spitting black smoke out the back. I

was in the car with him once and the car enigne just went off in the middle of driving !!! It does that sometimes and when he went to

the workshop to have them have a look, everything seems ok. He just sent the car into the workshop again and left it there this

morning to get it inspected on what was wrong. I'll let you know whats wrong with his car once the mechanic calls him, hope its of

some help.

Cheers,

Donovan

I don't know if this will help.. or its just a noob answer.. but..

The last time when i was driving the celica, power got cut from my car.. rev's were sluggish, hard to get above 4k rpm, boost wasn't coming in.. and yes, in the middle of driving the car died as well..

Turned out to be a stuffed alternator as the car was low on battery therefore all these problems..

Guess it won't hurt to just use a multimeter and check ur alternator too while ur at it..

My2c

Bernard

RB sounding like WRX = running on 5 or less cylinders.

Turbo should be fine, as I don't think it effects idle... more likely gasket on intake plenum gone bad, or coilpack/dead plug/sparkplug loom problem in one or more cylinders.

But I agree with Mike, don't drive it if its acting that erratic.

I agree, intake gasket, coilpacks and maybe injectors... My one has similar problem except only runs 5 cylinders as one of my valves are bent in the 6th cylinder. Maybe you can get compression test done or even a leak down test?

hey mate,

my housemate drives a WRX MY98, and his car is giving him some problems similar to yours eversince he got the car, which was about

one week ago. Sometimes the engine just idle below 1000RMP and it feels as if its choking and spitting black smoke out the back. I

was in the car with him once and the car enigne just went off in the middle of driving !!! It does that sometimes and when he went to

the workshop to have them have a look, everything seems ok. He just sent the car into the workshop again and left it there this

morning to get it inspected on what was wrong. I'll let you know whats wrong with his car once the mechanic calls him, hope its of

some help.

Cheers,

Donovan

cheers for that. car seem so undrivable atm

I don't know if this will help.. or its just a noob answer.. but..

The last time when i was driving the celica, power got cut from my car.. rev's were sluggish, hard to get above 4k rpm, boost wasn't coming in.. and yes, in the middle of driving the car died as well..

Turned out to be a stuffed alternator as the car was low on battery therefore all these problems..

Guess it won't hurt to just use a multimeter and check ur alternator too while ur at it..

My2c

Bernard

i hope it is something that minor, will have a look

cheers

I agree, intake gasket, coilpacks and maybe injectors... My one has similar problem except only runs 5 cylinders as one of my valves are bent in the 6th cylinder. Maybe you can get compression test done or even a leak down test?

oh no. hopefully it isnt that, but if we still cant find the problem, ill get the compression and leak down test done asap

Mike just came over, none of the hose or piping seems to be off

When i turned the car on, the engine was really struggling this morning, and started shaking A LOT

but once it warmed up after 2 minutes of so, the car idled fine again.

so after bout 10 mins of idling

i slowly took in for a lap around a block..(slowly)...car drove fine again- no stalling or weird revs

so took it for another lap. this time i let it rev to bout 3000rpm, where it would usually be making boost----but i can only hear the turbo making humming noises, shows no boost on the boost gauge, and cant feel any at all

the turbo?

Hey....im not too sure about the turbo as my car is NA but really sounds like a coilpack to me i had one fail the other week and it was running like crap same as the way you say yours is running then i took it in the shop and they said they fixed it but then another one failed and it was even worse i suggest getting the tested. Just my 2c

your vented hood..wheres the opening on top of?

check around there as rain could of got water anywhere around that area.

if its near the pod then take it out and check it..

but i reckon maybe its the alternator like what Slowpoke said.

I've had an alternator die on me once in my R31 and it just didnt charge the battery and the cars power drained and the car died.. I don't see how that is going to cause all these symptons that he is having. How does a dicky alternator make your car idle weird and rev up on its own and no boost?

yeah ztuned i think water would get into the coil packs remember it happened to me so my Ztuned hood is now in the shed :wub: heheh but yeah when mine sounde dliek a WRX no boost it was water in the spark plug area it was like a pool :down:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...