R33 S2 Motor Wont Start In My S1

[teazn_r33]

anyone pleae help

[Dose Pipe Sutututu]

to me that sounds like a mixture problem..

I had a very similar problem when I purchased my car... it would only start when cold, but once hot would crank and not start at all...

Everytime that happened, i had to drive the car back home the AFM disconnected, putting the ECU into LIMP mode and wait for it to cool down before I could start it.

After much stuff around, turns out my AFM & injectors were shot... Swapped a front bar for another AFM and got my injectors ultrasoniced and problem went away like that.

Also check for vacuum leaks, perhaps the mixture could be mega lean because of leaks..... check if the aux air unit is fully connected or blocked off, and all lines to the rocker cover / PCV are connects and sealed.

[teazn_r33]

ok plp im havin a fair bit of trouble

these are the pics of my plug and wires can someoen help me out please '

[teazn_r33]

coulours are as follow

on the plug

nothin

orange and blue

black

white and blue

grey

loom

black with white

white and blue

orange and blue

Edited May 25, 2008 by teazn_r33

[paulr33]

from my site http://paulr33.skylinesaustralia.com/diagr...ter-wiring.html - I have;

RB25 Series 1 AFM

Wire A - Not Connected

Wire B - Signal

Wire C - 12v Ground

Wire D - Signal Ground

Wire E - 12v Power

do each of your pins have letters next to them?

or are they in order? check before doing ANYTHING

RB25 Series 2 AFM

White with Blue Trace - Ground

Orange with Black Trace- Signal

Black with White Trace - 12v Power

[teazn_r33]

thnak you paul ill be onit