Jump to content
SAU Community

Haltech R35 Gt-r Dyno & Drag Results Thread


Recommended Posts

i am pretty impressed that haltech have done this.

Such a awesome result. Makes you think the guys that make these ecu's are really in tune with what is going on.

Well done Haltech!

  • Replies 81
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Well, im impressed. Haltech are well known. Heck i remember having a chat with this Japanese nutter on a bike with 4 turbos and when he found out i was aussie, he popped the cowling and underneath, lo and behold was a Haltech engine management system.

"Its subarashi!" he said.

10 seconds is ridiculous for the R35 and to think that came from only a boost increase. Its not really revolutionary though, is it?

if and when nissan starts selling R35's through their dealers in oz then they will offer a factory warranty. Most likely the vast majority of R35's in Australia will be purchased through Nissan, with the minority being grey imports (atleast in the near future).

So if you bought your R35 from Nissan (because it will be almost impossible to bring in your own street registrable grey import); would you want to void your warranty?

i dont know about anyone else but my memories of warranty repairs are not good!

i am shit scared of taking my new cars back to the dealer for any work. ( i have had plenty of new cars)

the last new car i took back for repair almost cost an engine rebuild as they forgot to put the oil filler cap on and the engine spewed out most of the oil

on the way back to my place. this was of course not there fault!! but they were kind enough to look at it for me. how very grateful i am!! (engine bay completely covered in oil with 500 klms on the clock)

there is no way in hell i will be taking my car back for repairs, service or any other mechaincal work, i am in the fortunate position of being able to carry out the work myself. (like quite a few others on here) and that also goes for if i buy an australian v spec version when released, it will never see a dealer after delivery either.

i dont know about anyone else but my memories of warranty repairs are not good!

i am shit scared of taking my new cars back to the dealer for any work. ( i have had plenty of new cars)

the last new car i took back for repair almost cost an engine rebuild as they forgot to put the oil filler cap on and the engine spewed out most of the oil

on the way back to my place. this was of course not there fault!! but they were kind enough to look at it for me. how very grateful i am!! (engine bay completely covered in oil with 500 klms on the clock)

there is no way in hell i will be taking my car back for repairs, service or any other mechaincal work, i am in the fortunate position of being able to carry out the work myself. (like quite a few others on here) and that also goes for if i buy an australian v spec version when released, it will never see a dealer after delivery either.

X11ty billion. They totally suck.

yep warranty is not all it's cracked up to be. the real ticket is to just try and buy a car that is well made and wont break within 3 years of ownership (after which you are on your own regardless of whether or not you had a warranty in the first place).

>_< Woo Hoo!

I can happily say that I was there at WSID to see the R35 arrive (driven) into the pits, got plenty of looks inside & outside of the car & then witnessed all if its runs for the day. This is truly the new King Of The Road........ Everyone else can pack their bags & go on a lovely holiday!

Compak Attack was a great day out & some other GTR's there also put some smiles on the faces of the Godzilla Fans.

Well done to the Hatech Guys. This car put in an impressive display with Joe Signorelli at the wheel. :)

Reaches for beer nuts. >_<

Noelene you;ve got to much time on your hands you;d better get your arse over to everton park there;s a tailshaft and exhaust awaiting fitment. and i know its 3 degrees at your place.

Noelene you;ve got to much time on your hands you;d better get your arse over to everton park there;s a tailshaft and exhaust awaiting fitment. and i know its 3 degrees at your place.

G,day old fella, Dont talk to me about bloody tailshafts atm. @#$$%$@##@$#$#$

Can you recall what hardy spicer charged you for that custom jobbie of yours.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
    • Hmm. I've gotten pretty good outcomes from talking to them about things that I've had go wrong or ideas for improvement. Have had a lot to say about the R32 FUCAs, and they have sent out some replacement parts for those, gratis, on a couple of occasions. Mind you, I have bought a couple hundreds of $ of replacement rod ends for them too!
×
×
  • Create New...