Jump to content
SAU Community

Recommended Posts

Location: Adelaide, SA

Contact: Call 0413250250 or PM.

Comments: These parts were on my R32 GTR for a short time. Most parts I bought new and have only got 2000kms on them. Willing to ship all parts (buyer pays postage).

Item: HKS GT-SS Turbos

Age: 2000kms

Condition: Near new

Price: 2200

To Fit: All GTRs

Item: HKS S/S front and dump pipes

Age: 2000kms / 4 months

Condition: Near new

Comments: Entire length covered in thermowrap

Price: 750

To Fit: All GTRs

Item: Bosch 044 fuel pump in tank setup

Age: 2000kms / 4 months

Condition: Near new

Comments: Includes Croydon Autosport's GTR speed fittings to make intank installation easy

Price: 200

To Fit: Any car but fittings suited for intank GTR

Item: Nismo 550cc injectors

Age: 8000kms

Condition: Excellent

Comments: Injectors professionally cleaned and tested with new o rings (cost $150) 2000kms ago.

Price: 600

To Fit: All GTRs

Item: Nismo bolt on adjustable fuel reg

Age: 2000kms / 4 months

Condition: Near new

Price: 85

To Fit: All GTRs

Item: Justjap FMIC hardpipe kit with additional silicon elbow

Age: 2000kms / 4 months

Condition: Near new

Comments: Silicon elbow replaces rubber pipe between rear turbo and twin turbo factory pipe.

Price: 320

To Fit: R32 GTR

Item: 3" Catco metal cat with 5” body

Age: 2000kms / 4 months

Condition: Near new apart from some cosmetic scratches on the bottom side from normal road use

Comments: Bolton for GTR

Price: 250

To Fit: GTR

Item: HKS super sequential BOV.

Age: Unknown

Condition: Good working condition. Some cosmetic scratches on the body

Price: 150

To Fit: Any

Item: Blitz I-Color Spec R Boost controller with optional $110 Blitz Tempurature sensor

Age: 2000kms / 4 months

Condition: As new, still has the plastic cover on the screen

Comments: This comes mounted in a stealth custom mount to suit R32 if you want it. Temp sensor has never been used and still in packaging.

Price: 675

To Fit: Any

Item: Power FC with Hand controller

Age: 2000kms / 4 months

Condition: Near new

Comments: Tuned by Martin Donnan @ Willall running all mods listed here (cost $600). Conservative tune at 1.1 bar which i wanted for everyday use. Dynoed at 305rwkw. Comes with bracket to bolt straight in.

Price: 875

To Fit: 32/33 GTR

Will post up pics in next couple days

Thanks

Wegs

Edited by wegs
Link to comment
https://www.sau.com.au/forums/topic/219736-gtr-bolton-performance-parts/
Share on other sites

First of the pics, more to follow :thumbsup:

Notes:

- Heat wrap on one of the hard pipes - this is the part between FMIC and TBody which is exposed to engine bay temps.

- Have a cover for the DSBC made of same material as mounting which hides controller.

post-16206-1211112233_thumb.jpg

post-16206-1211112236_thumb.jpg

post-16206-1211112242_thumb.jpg

post-16206-1211112246_thumb.jpg

post-16206-1211112255_thumb.jpg

post-16206-1211112259_thumb.jpg

post-16206-1211112287_thumb.jpg

post-16206-1211114918_thumb.jpg

post-16206-1211114964_thumb.jpg

Edited by wegs

I need the following stock parts to replace what i'm taking off. So if you have them in good condition we can do a deal.

Injectors (need to be free of leaking)

Front Pipe

Dump pipes

Turbos

Thanks,

Wegs

Edited by wegs
Are the front pipes compatible with an R33 GTR?

If so, I have the standard R33 GTR front pipe (also dump pipes). If you're willing to do some sort of a deal you can PM me.

Yes the front and dumps suit all model GTR's. I have another person looking at both front and dumps, will let you know if that falls through.

thanks

Wegs

Very interested in the 044 intank setup. Is that all I need to make it a direct replacement for my current pump? Whats involved in making it fit?

As you can see from the pics the install is quite straight forward IF you have the correct fittings on hand. First time around you'll need a couple hours to complete the job and a large ring clamp to hold it in the plastic cradle.

The fittings with my sale are quality earls parts - total price was $280. You can't just buy an 044 pump for $220 off the shelf and do the job.

Refer to following for instructions

http://www.skylinesaustralia.com/forums/Bo...p;hl=bosch++044

http://www.skylinesaustralia.com/forums/th...p;hl=bosch++044

Regards

Wegs

post-16206-1211257971_thumb.jpg

post-16206-1211257977_thumb.jpg

Edited by wegs

Item: Justjap FMIC hardpipe kit with additional silicon elbow

Comments: Sold

Item: 3" Catco metal cat with 5” body

Comments: Sold

Parts still required and can be traded:

Injectors (need to be free from leaks)

Stock GTR Turbos

thanks for all the interest so far.

Wegs

The following items are now on hold pending deposit

Item: Bosch 044 fuel pump in tank setup

Item: Nismo 550cc injectors

Item: Nismo bolt on adjustable fuel reg

Item: Power FC with Hand controller

Items still available

Item: Item: HKS GT-SS Turbos

Item: Blitz I-Color Spec R Boost controller with optional $110 Blitz

Edited by wegs

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi soviet_merlin, We appreciate your concern regarding this possibly being some sort of PR/Political hype, I assure you that is not the case, I wish we could claim something like that, but in this case, we merely reached out for comment on the basis of the outrage we too felt, as those heavily in the automotive industry. Ps. the original source in the social media post is CarExpert not CarExplore.    Best, CE.
    • Made a bit of a discovery, but while I was cruising, I randomly decided to test to see if it worked and it showed up on my IC7. The entire time I tested it before, I never thought to turn the ignition on. I only tested it with head lights turned on but with the ignition off. Huge oversight on my end. I’m a dummy. I know. 
    • G'day all, I have drilled and tapped the hole for the relocation of the timing belt tensioner. That was straight forward. I'm unsure if I need to also put another hole for the smaller stud that the spring behind the tensioner catches on (this is how it seems to work in its original spot). Or do you not use the spring behind it and just torque it down? Thanks in advance, I did a search but couldn't find anything related and it doesn't mention it in the rb30det sau guide.
    • Hi All,  just thought I would provide an update as I know smooth (Matt) was on this forum from 2003.    my brother Matthew passed away end of may 2024 at the age of 41 from liver failure. I am not sure how many of his original team krazy friends are still on here or active but thought it reasonable to let the forum know.    if you have any photos or pictures it would be great if you could share them.    it took me a while to work out he was active on here.    thanks so much 
    • Hi All,  just thought I would provide an update as I know smooth (Matt) was on this forum from 2003.    my brother Matthew passed away end of may 2024 at the age of 41 from liver failure. I am not sure how many of his original team krazy friends are still on here or active but thought it reasonable to let the forum know.    if you have any photos or pictures it would be great if you could share them.    it took me a while to work out he was active on here.    thanks so much   
×
×
  • Create New...