Jump to content
SAU Community

Recommended Posts

Hey guys, I'm sure some of you here would be working in a tech support kind of role. I've completed a Bachelors in IT around a year or so ago ... been working in a call center as a sales agent and then a team leader etc etc for quite a while now. I quit that job a month ago to get into my own field. I think tech support would be the best way to get into it? I haven't officially worked in IT till now although im pretty good with computers and can touch type etc but nothing "official" :laugh:. I was looking around on seek and most tech support / desktop support jobs require experience as well ... any ideas on how i can get into one? Where did you guys start?

Thanks for any help/tips!

Cheers

Link to comment
https://www.sau.com.au/forums/topic/219826-anyone-in-tech-support/
Share on other sites

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

well... what type of support role are you looking at? The normal entry level into IT (the one i took) is ISP Help Desk.

Before i did that i was a panel beater and then a warehouse admin person.

Did that for 3 years before moving into the role im in now which i have been in for 4 years now.

All of my mates used ISP help desk as a stepping stone. One is the Manager of the ISP Help Desk, the other is a Trainer, one is a network engineer and one is a CISCO engineer.

Most ISP help desk jobs dont really require any experience because they train you on the job.

depends on what you after. Helpdesk support or a bit more hands on.

i did work for a lil service agent and nexwork admin for a magazine company.. started off as work experiance and then was hired... as most people do. 5 years later im here in melbourne looking after the ecommunications of Vic Health..... so yeah came up in the world.... no uni required... took me as long though .lol

thanks for the replies guys ... we'll eventually i would like to go to be a sys admin but you have to start somewhere. I would PREFER the role to be hands on thats why i wasn't really looking at the ISP helpdesk roles. Is it worthwhile doing MCSE before going in or?

hoenstly ISP help desk is the best place to start... its easy to get into and not hard to move into other positions once you have a year or 2 under your belt and because of the flexible hours of most places you can do your courses etc and work at the same time.

MCSE is a starting point if you want... most help desk support teams prefer just knowledge and experience with things like MCSE as a nice to have. Every monkey and their dog has the MCSE so without experience it isnt going to get you looked at ahead of someone without it if they already have experience.

You wont get a more hands on role without expierience.

I wont give the nod to hire anyone into this area that doesnt have a good 4-6 years behind them.

As you cant let someone be "hands on" if their hands have never been used :starwars:

Go the help desk @ a IT firm/ISP etc.

thought of doing MSCE... not worth it... well it looks good.. but doesnt compare to experiance as said in other posts... get out there to a service centre and do some experiance... if there happy with you they will most likely keep you on. if you stay focused you can get places really quick.

Harvey Norman was good from the practical sense. You got the customers machine is, had to troubleshoot it, hardware or software, perform repairs, liase with suppliers and customers. Was very good experience and teached you a fair bit in regard to workload management, customer relations and hands on troubleshooting.

as most of the guys have said, start at the bottom and work you way up, thats how most progress

also be sure you are interested in IT and the computer industry, not just doing it for good $

if you are genuniely interested then start playing around with things at home

setup linux at home, get a cisco switch at home, use vmware on your pc

and play with windows 2000 server, windows 2008 server, linux etc

play around with networking, active directory, build your own domain controller

have a play around with cisco router emulator and so on...

when i hire guys i always look for guys who are actually interested in IT and computers

not just doing for it $, they are pretty easy spot. guys who play with the technology

at home, have a good interest and willingness to learn. thats a key component

also teachs you problem solving, and trying to learn/understand things that might be out of your current scope

theres always someone who can help, shed advice, point you in the right direction etc.

as most of the guys have said, start at the bottom and work you way up, thats how most progress

also be sure you are interested in IT and the computer industry, not just doing it for good $

if you are genuniely interested then start playing around with things at home

setup linux at home, get a cisco switch at home, use vmware on your pc

and play with windows 2000 server, windows 2008 server, linux etc

play around with networking, active directory, build your own domain controller

have a play around with cisco router emulator and so on...

when i hire guys i always look for guys who are actually interested in IT and computers

not just doing for it $, they are pretty easy spot. guys who play with the technology

at home, have a good interest and willingness to learn. thats a key component

also teachs you problem solving, and trying to learn/understand things that might be out of your current scope

theres always someone who can help, shed advice, point you in the right direction etc.

Thanks for this, I actually agree with you and i do REALLY enjoy working around computers, otherwise i was set to become an ops manager etc at the call center. I have a bit of networking done at home, my pc case is always open as i assembled it myself and keep tweaking it. I'll install linux and make mine a domain controller for the other 3 i have in my house and start looking for a job on the phones as tech support.

Thanks alot for the guidance people, appreicate it :w00t:

p.s. Could anyone please give me the download link for the correct version of linux that I should be getting? Also, any good e-books that you have come across?

Cheers

Edited by agentx

Don't do it, just run now. It will ruin your life....

No but on a serious note a Traineeship/Apprenticeship is a good way to go, the only problem is the money. I've taken on 3 trainee's since managing my office here and they'll all been very good. One still works with us today.

The problem I see with IT work is that there are far too many cheap and nasty providers out there so it can be difficult to find a good place to do a traineeship without them using and abusing you at a cheap labour rate.

I started as an apprentice 9 years ago and I’ll be part owner of the business at the end of June so that proves it a good path :w00t:

there are many different versions of linux - your local ftp mirror will have all of them, you should read up on a few before you go ahead and install

and to make it easier try and get another pc, like an old junker, linux will run on virtually anything, pentium 300mhz is plently.

redhat linux

gentoo linux

slackware linux

debian linux

read up and pick one of those, i use slackware and it works well, nice and easy

redhat is the common enterprise used linux as it has commercial support and supported software updates etc

ftp.mirror.aarnet.edu.au will have all of them pretty much

if not check out its.monash.edu.au as it will have them too

lastly, if you cant find them goto google and put in public ftp mirrors

there should be at least 5 or 10 in australia that will have iso copies of those linux versions

kool thanks, i have decided to install ubuntu as thats that easiest to transition to from windows from what i've read haha. I'm techy enough to figure out how to dual boot ( i think ) haha. shouldnt be that hard. I want to be able to choose between linux / windows 2003 server & windows XP in the end. Should have this all setup in a few days. Then i'll finger around with vmware and make the other computers in my house run domains etc etc. time to nerd it up.

dont bother with dual / mutli boot, waste of time and no-one uses it

and youll risk trashing your pc too, its much easier on another shit old pc cos then you can still use your normal pc if you trash linux

trust me, youll trash the install more than once, and its good practice, to trash a well known working install to see if you can rescue it yourself

also id recommend going into the deep end with linux, pick one of the harder text style linux's, youll learn a better methodical approach instead of windows based linux like gentoo

slackware was prefect for that i found, everything you had to do yourself, and you had to understand why and how before you could do it, you cant just click next next next

hmmm. well i'm gonna back up everything i need before i start. I dont really have the space/resources for another computer right now. I know its not a huge task but i'll probably give dual boot a go and see how i go with that first. Although I will look around for slack ware and see what the go with that is.

Going to be getting windows server 2003 as well on the side.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Add to this... What blew the fuse too? If a circuit feeding power to the coils was blown, how were the coils even functioning to let the car start?   There is some seriously wrong wiring in that car for certain, and I'm betting there is some melted cables somewhere, but I can't explain the 30v either, unless there is something back feeding on that power line that has a dodgy power system and the electronics are giving it hell.
    • This is typically the case with such threads. What I cannot quite get my head around is where a reading above 12V (or 13.8 or 14.x or whatever the maximum achievable voltage might actually be in that specific car) comes from. 25V or 30V should be completely impossible. There's no way to create it. Hard to answer that question. It will literally depend on whether the current tune relies on the values as set. I'd guess it probably does. ie, the real base pressure being 49 means that the flowrate through the injectors will be higher than if it was 43.5. The Haltech's modelling should be handling that, but because it thinks the pressure is only 43.5, then..... I dunno. It should be thinking that it will be injecting less fuel with each pulse duration than is actually happening. So, something is definitely not-as-it-should-be, but specifically what that is is beyond my abilities to imagine. Someone like Dose who spends more time with Haltechs might have a better thought.
    • Bit of a late reply here as me and my wife have been really busy with new born twins. I finally got these issues fixed and it was something really stupid that caused all of this 🤦‍♂️... After alot of mucking around with trying to figure out what is causing these issues, I back probed one of the R35 coils on the power 12v supply, with the engine running it got 25v! And I thought, hang on..., this isn't normal. Measured my battery with the engine running to check for over charge from the alternator and it wasn't that. So then I dissconnected the R35 PRP coil harness and backprobed the power supply on the engine loom where the ignition coil harness connects, with the key on ignition (engine off) it measured 30v! So then I had to trace where that high voltage was coming from and it lead me to the brown relay "ECM & IGN coil relay" inside the cabin next to the ECU on the passanger wall. This relay feeds power to the ECM and ignition coils. Tried swapping it with another same relay. nah still 30v.. coming from the 2 green/white wires in the brown relay. So then I set my multi meter to the beep continuity mode and probed every fuse on the fuse box inside the cabin to try and find this high voltage power source. Wasn't any of the fuses inside the cabin. Then probed all the fuses in the engine bay and BAM, got my power source that was a 10AMP fuse called "ENG CONT". Pulled the fuse out, and what do you know... it was blown. 🤦‍♂️  So then I quickly replaced it with a new 10AMP fuse, started the car and yeah haha [insert extreme face palm]... The RPM blimping thing went away, car idles smoothly now like what it was before. I swear! I checked all my fuses with my test light twice before I created this forum thread. I think, maybe because one side of that faulty 10A fuse lit up on my test light, I must have thought it was still ok and not blown. But now I know to have both sides light up on the test light when checking fuses... I hate diagnosing electricals.... I'd take mechanical problems over electrical problems any day🤣. Drove the car around my suburb with the engine up to operating temp and it runs fine like before. However, I notice that my fuel pressure is still at 49psi. So I'm thinking this must be normal for my system as I've upgraded the stock fuel pump to a Walbro 255L/h with a constant 12v mod.  But anyway, I'm just glad to have my daily back on the road! Thanks everyone for the replies on this thread, all sorted now! One thing I want to ask you tuner guys, my base fuel pressure on the haltech main settings are set to 43.5psi from default (my tuner must have not checked the fuel pressure maybe when tuning my car?). Do I set it to what it actually is idling on at 49psi? Or just leave it ("if it aint broke, don't fix it/leave it")?  
    • The max they would go for me is 50.
    • That cannot have been a fun set of drilling. The stock "baffle" looks identical to rb26, I just cut fuel cell foam to fit the full length under the baffle.
×
×
  • Create New...