Jump to content
SAU Community

Recommended Posts

hey people

this is a cruise that organised by Troy (Evo201) and AWD-Turbo.net

Detail of below

the time has come, get out your calanders and clear the 22nd of june

as it will be the first official AWD-TURBO.NET cruise

this will also be the 3rd awd cruise.

we will orgainise to have 3 meeting spots, followed by 200kms of great roads and finishing with a session of go karting at http://www.bigkart.com.au/info.html

cost is about $35-45 from memory depending on numbers we have

the day will be starting with:

1st meet will be 9.30am at the bp service center at coomera we will be leaving at 9.45am sharp. If you miss this meet just head straight for the next one as the direction sheets wont be handed out until the 3rd location. We will be taking the gateway so make sure you have the toll money $2.60.

2nd meet will be at the shell service center on the gateway at nudgee at 10.30am and we will be leaving at 10.45am sharp. If you miss this meet just head straight for the next one as the direction sheets wont be handed out until the 3rd location.

3rd meet will be at the bp service center northbound on the bruce highway at 11.00am and we will leave at 11.30am.

Direction sheets will be handed out at this location.

from here we have about 200kms of driving ahead of us.

THINGS YOU NEED FOR THE DAY

please be sure that you have a full tank of petrol or at least enough to take you 200km from the final meet

please be sure you are wearing closed footwear.

for those who will be at the first meet please make sure you have toll money.

cameras

uhf's if you have them though they are not mandatory

most important is front and rear drivshafts and a good attitude

optional extras include sick bag for any pasengers who might not like all the twists and turns of the roads we will be taking.

awd-turbo stickers will be available on the day

so post up if you are coming and also if you can give me numbers of passengers that would be great

http://www.awd-turbo.net/forums/viewtopic....5b551171d8b2bf9

please drop a reply here if anyone is going to come please, as the title said cars need to be AWD

hope to see you all there

cheers

Link to comment
https://www.sau.com.au/forums/topic/219828-awd-turbo-cruise/
Share on other sites

People who are Attending the cruise:

From AWD-Turbo

Evo201 - Coming.

K33P UP - Coming.

d_drifter_@pple - Coming. ( that's me )

calibrated - Coming.

G-T - Coming.

SNB17 - Coming.

phyrburn - Coming.

From Boostcruising

5000BE - Coming.

datt0man - Coming.

Tolez34 - Coming.

KRISPY - Coming.

qldcharger - Coming.

need_a_car - Coming.

David - Coming.

spazz- Coming.

come pimp my ride - Coming.

Dirty Gomez - Coming.

Mr-Toy33 - Maybe Coming.

STR8E180 - Maybe Coming.

TUN35 - Maybe Coming.

90 GTX - Maybe Coming.

Subaru Mad - Maybe Coming.

From Team4g

MDK87 - Maybe Coming.

brisvr4 - Maybe Coming.

from SAU

....none.....

Edited by Stephen22

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
    • Sorry for reviving an old post, but I'm having the same hot idle tick issue. Did anyone ever find out what it was?  I have checked/ replaced Injectors Coils checked Lifter clerance (is at zero) Checked Cam lobes Replaced exhaust gasket and studs Would appreciate any advice this is driving me nuts  
×
×
  • Create New...