Jump to content
SAU Community

Help Battery Problems.

MyR3408

By MyR3408,
in Queensland

 Share

Recommended Posts

MyR3408 Enthusiast

MyR3408

Posted
Posted

Hi Guys Just need some help. for the past week Im having problems starting my car. Almost everytime that I have to use it I have to Jump Start the Battery.

Nothings draining the battery but I think the battery does not charge at all.

My guess would be the alternator....but not 100% sure. Any advice will be good :)

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/219854-help-battery-problems/
Share on other sites
HackerX Community Regular

HackerX

Posted
Posted

So it's not pushing out enough voltage to turn the starter motor.

Basically, what Zennon said is your best option. Otherwise, if you're an RACQ member get them to come out and try it (and then try and sell you a battery). Either will do the same thing.

MyR3408 Enthusiast

MyR3408

Posted
  • Author
Posted
So it's not pushing out enough voltage to turn the starter motor.

Basically, what Zennon said is your best option. Otherwise, if you're an RACQ member get them to come out and try it (and then try and sell you a battery). Either will do the same thing.

Yep its not pushing enough voltage... hmm looks like ill be needing a new Battery.

I'll go to an auto electrician to get it checked.

Thanks Guys for the Help and advice! :starwars:

Dantay Rising Star

Dantay

Posted
Posted

have you got a meter handing at all? that will tell you if its just dropping the voltage when you turn the key which means its leaking somewhere.

are the terminals and connectors hot at all? that would indicate a shit connection in which case tighten the connector or check for a lose terminal. check water levels too. if you have a meter that will pretty much tell ya the story straight away.

53XYN Veteran

53XYN

Posted
Posted

hey bud , i had the same problem its your battery , with skylines if the battery dies you heara ticking sound when trying to turn the ignition over , usually means your battery doesnt hold charge anymore

Miss Niz Rising Star

Miss Niz

Posted
Posted

My battery kept going flat in my 34 when i first bought her. I had the battery replaced under warranty by the car yard, but it still kept going flat. Ended up being the dodgey head unit that was in the car was draining the battery during the day. Some dodgey assed wiring or something.

MyR3408 Enthusiast

MyR3408

Posted
  • Author
Posted
have you got a meter handing at all? that will tell you if its just dropping the voltage when you turn the key which means its leaking somewhere.

are the terminals and connectors hot at all? that would indicate a shit connection in which case tighten the connector or check for a lose terminal. check water levels too. if you have a meter that will pretty much tell ya the story straight away.

i dont have a meter handing at all, I'll ask the electrician to check if theres any leak in voltage.

maccattack Proficient

maccattack

Posted
Posted

Its the cold weather. You always see a heap of batteries die as soon as the temperature starts getting colder.

Generally means its time for a new one. Whilst they always cycle in temperature normally, the big reductions

when you come into winter is enough to push them over the top.

Just means your battery is at the end of its life.

.:: GimpS-R34 ::. Grand Master

.:: GimpS-R34 ::.

Posted
Posted

as you figured out by now, your battery isnt hloding charge..

best bet is buy a new one, not expensive.. no piss farting around.. however with certain batteries you can check the water level.. (little caps you can unscrew.. and make sure the water level is right..

but even then i'd still go with the new battery.. best option

Benno- Community Regular

Benno-

Posted
Posted
My battery kept going flat in my 34 when i first bought her. I had the battery replaced under warranty by the car yard, but it still kept going flat. Ended up being the dodgey head unit that was in the car was draining the battery during the day. Some dodgey assed wiring or something.

sounds like a brisbane car sound thing ay :(

my battery is doing the same, ever since i had my alarm installed from brisbane car sound..

gone thru two batteries now... car is currently flat and dead at home, unless i jump it.

ZENNON Grand Master

ZENNON

Posted
Posted

I don't think it means alarm is necessarily incorrectly installed though..

I have an old hilux with like no electronics - can leave that sit for a couple of weeks and all is fine

But if I leave the skyline sit for couple of weeks the battery goes dead (it has alarm)

ps. cold weather wouldn't be helping either

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • kevboost7
      Magnetic Drain Plug Snapped in Half

      By kevboost7 · Posted

      Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • MBS206
      New fix for low tyre pressure from bmw

      By MBS206 · Posted

      Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • sunsetR33
      Anyone know this frontpipe?

      By sunsetR33 · Posted

      Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • dbm7
      New fix for low tyre pressure from bmw

      By dbm7 · Posted

      Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • joshuaho96
      Anyone know this frontpipe?

      By joshuaho96 · Posted

      You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
×
×
  • Create New...