Jump to content
SAU Community

Recommended Posts

Hi guys...

Well after work i was driving for a bit about to take my GF home / see a mate and yeh. Roads were wet and slippery, was on a hill turning from a road (going down the hill) right onto a road (still on a slope) was doing about 40k's slowed down like usual, prob entering the corner at a MAX of 15k's and then felt a bit of understeer, so i figured yeh took it a little bit fast just brake a little and fix it up like normal (obiously i have experienced understeer/oversteer before and know how to correct it) but this thing just wouldn't correct, it was like i was on ice and kept sliding, went into a gutter (front left) and it just kept going a little further and i hit a tree (front left), took a little while for me to realize what had happened (shock i guess) hardly felt anything in the car.

And yeah organized a tow truck and the usual.. I have full comp with Just Car and just sharing the shit night it just became, and wondering what you guys think will happen from here?

So disappointed in myself.

post-34834-1211213970_thumb.jpg post-34834-1211214037_thumb.jpg

Hub.bmp post-34834-1211214289_thumb.jpg

Leigh

post-34834-1211214131_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/219993-had-a-incident-tonight/
Share on other sites

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Damn man, that really sux!!!!!!

Sometimes roads turn to ice and there's just no stopping, no matter how slow you are......

really suck cos I know JC has really high excess!>...

Depending on what needs repairs, might be better not making a claim and just paying for the repairs. It might affect No claim bonus or increase you premium for a while.

just things to consider before finalising the claim..

more than 4-5k for a good repair to that IMO. Lots of stuff will be pushed in that you cant see :)

I'd take it down to Micolour for the repairs as it'll be done right the first time :)

Dont feel too bad over it mate, sh|t happens. On a cold/wet night there could have been some chemical/ice etc on the road and thats just how it goes sometimes.

Cause might have been tyres? I know in these conditions of the season tyres that might not be upto scratch might be a cause, just something to look at.

Least your alive and ok, thats the main thing, let insurance do the rest :)

over a tonne of moving mass at 15klm and a whack right on the rad support/upper skirt would do that kind of damage no worries....youve got to remember that the force is more concentrated due to the diametre of the object he has hit....example if he hit something that was 2 metres wide there would be less damage due to the load area spread across the wider object

Oh well lucky you are not hurt.

I had a similar incident in my old car, but didn;t hit anything thank christ. As Ash said probably the tyres, mine were fine in the dry but a death trap in the wet, particularly if you has stiff suspension.

Good luck with the repairs!

over a tonne of moving mass at 15klm and a whack right on the rad support/upper skirt would do that kind of damage no worries....youve got to remember that the force is more concentrated due to the diametre of the object he has hit....example if he hit something that was 2 metres wide there would be less damage due to the load area spread across the wider object

thanks for your expert opinion. we can tell you studied hard :P

Physics yea??? or was it back yard testing lol

Yeah it sucks :P making a claim today, and yeh see what happens from there i guess.

The road was on quite a steep hill going down, then right if that makes sense.

Honestly i wasn't screwing around or anything like some of you may think.

I was so shocked at what happened I really didn't expect anything like that, be careful in the wet and frosty guys don't want to see this happening to more Skylines throughout winter especially.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just install a grease nipple into the centre of the outer steel of the FUCA. Make sure the bushes aren't long enough to touch each other underneath that nipple. Cut a few mm off each if need be. Then you can push grease in there while it is all assembled. That was the very first thing I did (to all 4 ends) of the FUCAs on my 32 when I put Whiteline adjustable bushes into them. They would squeeze the grease out real fast, and I could squeeze it back in faster.
    • @GTSBoy I found the issue (sort of) when I took apart the bushing again, it was completely dry inside! When I experimented with it, all the grease would push out when I would compress the bushings. I wonder if this has anything to do with me putting in the poly bush first on both sides and then pushing in the metal barrel. Maybe I should have put in the metal barrel first then the rubber bushings so the spread pattern is different.   It's fixed (for now).
    • Just redid that entire job. 4 hours, but tightened everything properly. Had to jack the rotor instead of having the car on blocks as there was no room for the FUCA arms to tighten and the j arm. All good now. Cheers for the help!
    • I would sell those side feeds before you hydra-lock a motor. I won't say too much about Yellow Jackets because I'll hurt people's feelings, however ask those that tune RBs day in/out what they think of them.
    • The 1000ccs are side feeds but they're not currently installed, had my old factory ones in for leak testing purposes, only decided on them because front facing plenums and good top feed rail kits are out of my budget at the moment, are they really that problematic? Had a set of yellow jackets that lasted me 5 years, no real issues, only replaced them chasing this misfire issue that ended up not being ignition related 😄  
×
×
  • Create New...