Jump to content
SAU Community

Recommended Posts

no videos on that r14 race website, which is a bit of a bummer

lots of photos tho and it seems they have sold a few kits here and there.

tho their doing away with attessa is something strange? as it quotes some of us do this.. which isnt quiet true.

maybe they mean they are using a controller to sort it out like most of us.

i think i will go ahead with it, considering that the original strut towers are intact...

Hardly theirs is cut and shut... i prefer to swap out the whole tower as it is neater and has factory strength.

URAS,how did u fit the r33 front suspension into s-chassis ? U sued the whole r33 strut towers ? Or just weld on the braces for the upper arm ?

R33 towers, ive been toying with the idea of R32 GTR'ing the front of the 180 (panels lights etc) i have here (leave 2wd as 4wd is less fun) and slotting the spare 26 in it.

id do it purely to piss everyone skyline and 180 purist off :woot:

i orginally measured up a 300zx front clip (most hated import) but it was way to much work.... and far wider.

CATS drift car actualy uses a R32 GTS-T lower rad support and castor brakets, all that was left was to fit the towers but i CBF'd.

what about r32 towers ? Maybe a little less work involved ? Or r33 got a better double wishbone setup? heard the upper arm is different to r32s.

Also, what about the engine crossmember. 4wd one is totally different to the 2wd one. But what else needs to be done to accommodate 4wd crossmember and suspension is s-chassis ? I'm thinking with r32 strut towers and whole r32 front suspension it could be a direct swap, no ? And no need to drill or bend the chassis rails for the front drive shafts. Am I thinking correct here ?

there was 2 video of that R14 on youtube but they are not there anymore ...

they keep the attessa , they just put a elecronic controler / manual arm (second hand brake that you see in the R14 pictures) to controle the troque to the front/rear wheel ...

as for those kit bieng sold ... i dont think they are prety poppular cause . i didn't see one in canada or in the state in the past year ...

sorry for my english !!!

Edited by rbs14kouki

In the states they do this conversion to S14s, as it is hard and expensive to get compliance for a GTR.

I saw this on an IGNITION dvd ill try to find it for you, I think there is a mention of the company who do it. From what I remember it is not that difficult to do.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • One other question, is there a chance that changing the idle speed can lead you down a rabbit hole and is the reason the tuner didn't touch it? Reason I ask is because if that's the reason the tuner avoided it then I probably shouldn't be touching it lol.
    • Pfft. As if I'd ever point a high pressure washer at my car.
    • The nature of my commute has changed. Way back then it was traffic lights all the way, for ~28km. It sucked. When they finally stitched the expressway together I could do a good 15+km of it at a steady 80-100 with no stopping. That alone has gotten me down to flat 10s. Prior to that it was mid-high 10s. I can't remember the delta that I saw when I got the idle down. It was only ~150 rpm, because the idle speed was never terrible, but for the delta in consumption to be noticeable it would have had to have been at least 0.2-0.3 L/100km - which is not to be sneezed at when it comes for absolute free. It's only about 50L per year, but that's ~$100. A few extra pizzas is always welcome. Note that I have a record of every tank of fuel that has ever gone through my car except for a handful put in by someone else, like my mechanic. I can show you the difference between stock RB20 and tuned RB20, stock RB5Neo and tuned, winter and summer fuel blends, winter and summer fuel blends when the ambient temperature is not appropriate for the blend, working O2 sensor, blown O2 sensor, boosting f**k out of it and frightened to boost it because it is pinging, and so on. OK, I probably can't do all that now with 100% clarity - but at the time when any of those things were in event, you could see it in the records. There's 25+ years of simple tank after tank records, so you have to look for landmarks to work out approximately how old any single record is. What's really important is the meta data and that lives in my head.
    • If you're claiming the issues are not skyline specific, then either the USA is living in the 90s / early 2000s, OR you have the issue of "survivor bias". Which is you're mainly hearing and listening to those with terrible experiences, and haven't found the guys who have cars with good decent builds and no problems. It happens in AU too, that plenty of people keep having issues, and they keep going to the workshops that are known to be shit "because I read on the internet". Even worse, are those who keep posting on the internet as though they know for a fact what something is, when they've never touched/looked at said item in their life, and again are making assumptions, based on something they read, or because it's a certain way in other cars. It's even funnier when those same people debate the facts with the people who've lived and breathed this stuff for over 15 years. Example, I've had someone tell me you can't do something with a Skyline, because they read it on the internet, except I can tell they're wrong, as I did that exact thing back in 2008 with my Skyline.
    • The funniest part I saw, was someone would bitch and moan on FB about something, Andy would be the one to respond, asking for more info, if he could contact them, what the engine setup is, what their config file was, and 95% of the responses were people just going "der! It doesn't work" and Andy going "What doesn't work?" And then going "The firmware!" And they'd go around in circles as no one could ever give information, and Haltech couldn't fault things on the bench, (especially when people wouldn't give any specifics).   Many moons ago, when Andy was back at e420c stage, he reached out to me, and asked me to test different plug and play looms for him (already had an e420c in the car on his V1 PNP loom). And he kept asking me, as I was competent enough to be able to give him some specific feedback on what was/wasn't working, how to replicate the faults etc, and work through things with him. Most people are terrible at answering the questions they're asked, or being able to provide quality feedback other than "it doesn't work".
×
×
  • Create New...