Jump to content
SAU Community

Recommended Posts

its probably a stupid question, more out of curiousity then wanting to actually do it, but is it possible to shutdown 2 or 3 cylinders while driving for fuel economy? ie turn off some of the injectors temporarily or another way? im sure its not that simple and theres probably some bad effects on the engine/fuel system which is why no one does it, but if someone could explain why its not possible i would be interested to know. i was thinking of a 8 cylinder engine i read about a while ago that runs on half its cylinders to save fuel economy until you floor it, and then it runs on all the cylinders.

theres a bit of information on the internet about it 'firing on half-cylinders' or 'cylinder deactivation' but im interested if its possible to implement a similar thing on standard cars.

its all in the ecu.

The new computer from ray hall would probly be capable of doing this if they wanted too.. i dont think there are any aftermarket ecu's that do it at the moment.

Make one. let me know how you go :(

Its both electrical and mechanical

From what i've kind got to understand its actually the valves on the particular cylinder being held open through the use of oil, flow of oil to hold the particular valves open obviously would be commanded by the ecu once it knows the car is at a cruising point where it can shutdown cylinders. i had it explained to me a few weeks ago but i forgot how and what actually happens. we were talking about it at work today, its how I kind of remember.

i think maybe its like vvti, vtec? where the valves are open for a little longer at higher rpm, but instead constantly held open

dont quote me on this either, as im not 100% but will definately find out again.

Apparently this function is already in the VE commodores, but due to vibration are not enabled.. so we'll most probably see it on the next series once they have their vibration problems sorted.

Edited by shAkIeL

what im interested to know, is just say you can make a switch that turns off three of the injectors, and use this switch when you dont need power (ie driving in traffic) im pretty sure you can turn off injectors using a laptop connected to consult port, but if you do this, is it safe for the engine, and would it screw up the fuel mixtures etc? i would have though if half the injectors are available, half the fuel is being delivered, and its in proportion so it should still run ok but with much less power? or is it more complicated then that?

some information on the net says the engines that have this done (using the physical system on the valves of the cylinders), get up to 20% more fuel economy.

With factory cars that do it they keep the valves open, as if you just turn the injectors off you will still have mechanical loses from compressing air. It will also run incredibly lumpy and probably not idle properly.

Basically dont bother unless you feel like engineering a head that can force the valves open.

What i do know is that the system in the Chrysler 300C actally alternates which cylinders are shut down, otherwise you would have uneven wear within your engine.

And according to reviews in some major motoring publications, it doesnt really give a dramatic improvement in real world economy.

Its still all new technology so I dont think we're going to see any real improvement in fuel economy from cylinder deactivation for a couple of vehicle generations yet.

I think its only a sales gimmic...like hybrid cars. Pseudo-green cars.

In my opinion you want economy go buy a new diesel golf. (i die a little inside when i suggest someone buys a diesel).

Would be a laugh to try it, pick up a sh!t box from a wreckers and wire a switch to deactivate 2 injectors like you suggested. Just dont spend any money on the thing.

I think it's a stupid idea, just for marketing really at a time when people are more fuel conscious. All that mechanical energy is being wasted by driving the inactive pistons, its just stupid. I like the idea of having a smaller capacity turbo charged engine, and using right foot to lower consumption.... Not that that actually ever works in real life hehe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah this confirms what I was thinking. Volks are worth a crap load more than my M Sport 17s and 2500 is nuts!  240 is crazy cheap, was this 20 years ago? I have a fairly good air compressor so I'm tempted to get an eBay sand blaster. 
    • I got a quote to restore a set of Volk racing gtc wheels at a wheel restoration shop which involved repainting the centres fixing some small gutter rash and repolishing them and the quote was $2.5k I ended up getting them sandblasted and powdercoated for $240  
    • Nismo 300km/h speedo for R33 gtst in GTR cluster.
    • Has anybody had their wheels refurbished? I reckon it's likely bloody expensive. Even a sand blasting quote for my 17s was 200-300 per wheel! The E39 wheels are basic BMW M Sport (or M Tech at the time.) they have slight rash and some have signs of bad repair in the past on the lips. The main issue is that they've become really off coloured.  I think it will be too much as this is definitely (supposed to be) a budget resto. I've been looking at others for sale but they all have some minor damage and colour issues.  In the end I think I'll just need to sand blast them myself and do a respray.  
    • Trying to figure out which nismo cluster i have. All the ones i see on the internet, the speedo goes up to 320kph and the revs 11k, with the nismo logo being on the rev gauge only. But on my one, the speedo goes up to 300 and says nismo, while the revs only go upto 10k and no nismo logo Dunno how to embed pics into a post so ill attach pic of my cluster and generic google search for reference Is what i have genuine?
×
×
  • Create New...