Jump to content
SAU Community

1989 R32 4 Door - Silver

dbo

By dbo,
in Classifieds

 Share

Recommended Posts

dbo Enthusiast

dbo

Posted
Posted (edited)

Time to sell my beloved skyline as i've got a company car and this thing sits here not getting used for what it should be.

Nissan Skyline R32 4 door Sedan - Silver. Done 125,XXX kays

Has been driven probably 3000k in the last 12 months. Mostly highway kays as it was a work vehicle.

Engine:

RB20 Dyno tuned to 195.4rwkw

R33 turbo running at 1 bar (GCG actuator)

Custom FMIC and piping

Custom 3" dump pipe and high flow cat

Chiptorque chipped ECU

Walbro Fuel Pump

HKS SQV Blow-off Valve

Suspension:

Tein front coilovers

GAB? rear coilovers with adjustable dampers

Solid Cradle bushes (not installed yet)

Solid Steering Bush (not installed yet)

Hicas Lock Bar

Wheels:

Enkei 16 x 8 all round (can't remember exact offset but believe it is in the 20's, the rears sit pretty flush)

25m spacers on the front to clear brake calipers

Running cheapo tyres for RWC bout 90% good

Other Crap:

NPC Organic clutch has done bout 5000km

Rebuilt g/box

AVC-R

Boost Gauge

Eclipse head unit with s***ty 6x9's

Car handles really well, and to get this thing going sideways all you will really need is a decent seat to hold you in and a diff. The engine is really responsive, and has always been serviced by Jetronics Motorsport.

Known issues:

Has shake in the tailshaft. Nizzpro quoted me $250 for replacement shaft which will fix it all up.

Paint is faded in areas. What car that is 18 years old doesn't have faded paint?

Bleach stain on back seat, has been like that since it came from Japan.

Broken wheel stud on front left.

Air-con compressor has died. Jetronics will replace this under warranty but I haven't done so yet incase new buyer doesn't want the air-con.

Air-con vent in middle is missing (approx $100 to replace)

Radiator rubber mounts are cracked. Still holds radiator perfectly just doesn't look good.

Input bearing noise, which just about all R32 gearboxes have.

Price: $9000 ONO (if you don't like the price I don't care. It is negotiable. NO SWAPS)

Contact via PM.

Edited by dbo
Link to comment
https://www.sau.com.au/forums/topic/220399-1989-r32-4-door-silver/
Share on other sites
dbo Enthusiast

dbo

Posted
  • Author
Posted

Thanks mate. I think the price is very reasonable, paid $12.5k for it 2 years ago and have spent some money on modifications. The change in licensing rules means they just aren't worth as much anymore :(

Anyone interested?

  • 2 weeks later...
ZENNON Grand Master

ZENNON

Posted
Posted

aaah so you're in qld lol (just saw your other thread and suggested you add location)

The change in licensing rules means they just aren't worth as much anymore :D

don't think its really the licensing rules that caused the price drop - its more because cars are getting older, new ones are coming out, and the fact that there is so many of them now - good old supply & demand

gl with sale

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Import insurance in 2025

      By Kinkstaah · Posted

      The max they would go for me is 50.
    • Duncan
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By Duncan · Posted

      That cannot have been a fun set of drilling. The stock "baffle" looks identical to rb26, I just cut fuel cell foam to fit the full length under the baffle.
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

    • GTSBoy
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By GTSBoy · Posted

      I understand your sarcastic exasperation. But to be fair - the baffles do indeed fit OEM cam covers. They did omit to say that you need to do a bunch of stuff. But they do fit them.
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      Got started on the modification to make these splash plates fit over the long weekend. First the surprisingly time consuming task of swapping all the cam cap bolts to Tomei cam cap studs. I did the method of removing one bolt at a time, applying loctite to the stud, double nutting to torque as the manual described. Then carefully unlocking the nuts without disrupting the torque of the stud (and going back to re-torque a few times when it slipped). Finally applying the nut and torquing to spec. Repeat x28 Next up I went about removing the stock cam cover baffle so I could ensure it was fully clean after drilling for stud clearance.  As the blind rivets holding the baffle on were domed I used a punch to mark the center then used 4mm drill bit to carefully drill out the rivet without going too far part the baffle. As seen in other thread here is what is inside the stock baffles I decided on M4x6mm bolts to bolt the baffle plate back on with. I used a 3.3mm drill bit with some tape to mark the depth at ~8mm. Next was to tap the threads using a cheap bunnings kit M4x0.7. With the baffle removed I also drilled out the spot welds holding in the baffle plate oil returns. Unsure whether this was the best option or if I should have cut holes in the Hypertune splash plates to allow the oil drains to still function... time will tell. I then removed the the Hypertune splash plates so I could rest the cam cover on top and use a dab of grease to mark where the studs impacted the oem cam cover baffle. The most obvious spot was on the hump from the stock mesh is held. Using this hole as an anchor I bolted the oem baffle plate back into the cam cover and lined up the Hypertune splash plate. Marked the rest of the holes for the studs and drill those out too. Total 32 holes drilled and 12 threads tapped on the passenger side cam cover alone for this bolt on part that totally clears all OEM cam covers.. Drivers side next as well as some E85 safe fuel foam to fill the space behind the behind cam cover baffle plates. oh and some lock nuts for the splash plates of course.
×
×
  • Create New...