S1 Ecu Pinout

[bbenny]

Hey Guys,

Havent had any luck finding the Stagea S1 ECU pinout.

I have an SAFCII and want to fit it myself but dont have any pinout info.

Can anyone help me with this?

Thanks in advance!

Ben.

[Terminal]

I have it at home, if no one else gets it to you before I get there, I'll send it through

[Tangles]

Hey Guys,

Havent had any luck finding the Stagea S1 ECU pinout.

I have an SAFCII and want to fit it myself but dont have any pinout info.

Can anyone help me with this?

Thanks in advance!

Ben.

?

http://www.skylinesaustralia.com/forums/Ap...60&start=60

page 4

see my link

download the english instructions for the safc and stagea

all the info is around here mate, just got to search.

for a full ecu print out do a search for "secret squirrel trick" for the power-fc wiring to a S1 stagea ecu.

[KiwiRS4T]

Didn't have any luck with the "secret squirrel trick" search.

Can anyone confirm that the ECU pinout in the DIY section under series 2 pinouts is the one for my 1997 series 1 RS4T? (confusingly the engine is referred to a series 2 RB engine but that's another story).

I understand that the Series II stagea has the R34 ECU but that the series I has a number of different ECUs. But do they all have the same pinout arrangement? I have followed a number of trails all over this site without a definitive answer. If anyone can supply a pinout diagram that they have used for their Series I stagea and know to be correct that would be great.

[Duncan]

no be careful. there are 3 ecus/different pinouts in series 1 stageas. build dates and part numbers are in this thread. the workshop manual only shows the first pinout http://www.skylinesaustralia.com/forums/R3...html&hl=ecu

[KiwiRS4T]

no be careful. there are 3 ecus/different pinouts in series 1 stageas. build dates and part numbers are in this thread. the workshop manual only shows the first pinout http://www.skylinesaustralia.com/forums/R3...html&hl=ecu

Yes, thanks...read the thread. My ECU is 23740 OV300 so I will assume that is as per the manual and as per the R34 pinout for s2 Stageas. Will cut wires one at a time and test. Would be good if you didn't have to make like a detective and people could post up the three pinouts that go with the three series1 ECUs under the thread for series 2 ECU pinouts.