Jump to content
SAU Community

Recommended Posts

Hey Guys,

Just want to query something. I know this guy who installed a Pod filter onto his S14 200sx.

He was driving it on a hot day and he looked at the temperature needle and the engine was overheating. So just wanted to ask a stupid question would adding a pod filter without a heat shield cause a turbo car's engine to overheat??

Thanks

i highly doubt it!! it would have minnimal if any effect on the cars ability to cool.. tell him to check the obvious: coolant level, thurmostat and his radiator could be blocked.... if its an extreme issue tell him to take it to the pros and have radiator backflushed new thermostate and fresh coolant... an overheated engine can cause permenant damage

I know this guy who installed a Pod filter onto his S14 200sx...

...He was driving it on a hot day and he looked at the temperature needle and the engine was overheating.

I may be looking at this too simply, but if your indicating that the car overheated on a hot day (which it hadn't done before) after the addition of a pod... then isn't it likely the heat issue was caused by something done at the pod install?

Was anything else done at the same time, ie coolant drain / refill without a proper bleed? These SR drivers you know... :bunny: jk

Not too sure. Just saw some people here saying how much hot air a un-shielded pod sucks into an engine on a hot day.

Thought maybe that would be it. So much hot air going into an engine cant be good I imagine.

Im glad I never decided to go pod filter and use a panel filter with the stock airbox.

Ok cool thanks R31Nismoid.

As someone has already nicely said, a FMIC could also cause overheating as it is blocking the radiator.

So if someone decided to installs a pod for the induction sound (its all there good for) with a FMIC thinking it will battle the extra heat are mistaking because it may actually cause more problems.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back in January, I noticed my car felt noticeably weak. I had the injectors cleaned, which seemed to solve the problem -- until now. Recently, the car suddenly lost power again while driving. Suspecting the injectors, I brought it to the mechanic. He recommended replacing them entirely, saying the current ones were getting unreliable and fiddly to work with. I could not find a direct replacement for my current injectors. The closest match I found were 440cc injectors. This led me to look into the possibility of upgrading -- and of course, that would mean remapping the ECU. From my research I found: The OEM Part numbers are 16600-72L20 and 16600-72L21 Both the RB20DE and RB20DET use the same 270cc injectors. There are much better options out there over the old OEM injectors. Nistune could be a viable tuning option. While the RB20DE isn’t explicitly listed on their site, the ECU is essentially the same as the GTS-T version - just with a different map. The ECU code on mine is listed as supported. One concern is finding a tuner who works with Nistune. Aftermarket ECU like Haltech and Link, but this would be the most expensive choice (and possibly overkill for a mostly stock RB20DE) I admit that I am very new to the tuning scene and would appreciate any insight or recommendations regarding this.   These are some SAU links where I got some of my information from for reference: https://www.sau.com.au/forums/topic/380324-rb20de-injectors/ https://www.sau.com.au/forums/topic/477396-factory-270cc-injectors/  
    • The inspectors are not forensic by any means but if you forge your documents and/or badgings on vehicle parts and are found out, the consequences are just far bigger than if you just run illegal parts. And their job quite literally is to cross reference what parts you got installed and what your papers say you got. Something as silly as your suspension being 1mm too low will fail you. Nonetheless I asked if someone knew the damn pipe and I certainly did not ask for smartassery or underhanded comments, no idea why you need to be told this. Great way to waste both our time.
    • As useful as you explaining what forgery is... But then again, I wasn't aware your inspectors were also forensic experts and inspect nameplates on each component to confirm everything is original. They must inspect roughly 3 cars a year at that rate. You're right though, my comment doesn't help you in anyway, so I'll go talk to my wall now. Cheers. 
    • Say that to the guy that is going to fail your inspection or tow your car for illegal exhaust modifications. If you have anything else useful to say, please go tell your wall.
    • You must be fun at parties. 
×
×
  • Create New...