Jump to content
SAU Community

Recommended Posts

hey guys i blew my stagea up.cracked 2 pistons and broke the ring lands off 2 others. was about to bore the block when found it to be cracked between number 4 cylinder head stud bolt and the water jacket .has anyone herd of this before i know 26s had this problem but not 25s . well long story short i need a new block would anyone know where there is one layin around. cheers bernard .

Link to comment
https://www.sau.com.au/forums/topic/220621-my-stagea-has-a-cracked-block/
Share on other sites

http://www.japparts.com.au/products/engines.html

Nizpro (Nispro?) on the Gold coast have a few stags sitting there, apparently, as well. I'll see if the youngsters know of any around the place as well...

It may be cheaper to jusy source an RB25 N/A for a Sky.

Generally Importers rub their hands in glee when you mention Stag, and the price can go up.

I was at Nizzpro last week and they had a couple of wrecks and a half cut, There were also RB25 motors lying around.

Ring Jeff Anderson 0413 729 446

thanks guys . yeh i bought everything forged for my engine now i have to buy another to put it all in it sucks arse cant belive my luck .but all i keep thinking is it ganna haul when its done hope to get big power out of this one .for the dollars spent .killed my paint job funds dam it but all be worth it in the end cheapest block i found so far is 1 g they wont take the head and sell it to me cheaper so gotta take it all .but they were willing to keep the diff the bastards that was the first thing they said it would be sold with out .

every time an RB25 drops a ring land, baby jeezus cry's.....

Baby jeezuz spends a fair bit of time crying usually.

What caused the meltdown anyway? What sort of boost? There is a bloke on here somewhere that is keeping a thread running about engine failures, make sure you do a search and have a read.

every time an RB25 drops a ring land, baby jeezus cry's.....

Baby jeezuz spends a fair bit of time crying usually.

What caused the meltdown anyway? What sort of boost? There is a bloke on here somewhere that is keeping a thread running about engine failures, make sure you do a search and have a read.

was i little bit of my own fault really. i had a gt34r turbo high mounted and 40mm gate which was mounted near the steering rack .i have the worst luck that when was doing high speeed and high revs a stick or some thing tore the wast gate line off and so be it .was only a split second and herd the wast gate shut and hit the clutch strait up but looked in the mirror and could not see the road behind . then the flames came oil all over a glowing turbo not a good combo. was massive boost as it has stretch the impellor shaft in the turbo and all.

so yeh now the head is flowed full forged everything for the bottom end cams and gears and trust intake with 90mm throttle body and a gt35 82r turbo thanks to gcg .

everything is sitting at advan waiting to go just trying to sought out this bottom end and to rb30 i will see how i go with this bottom end in sydney if it is a dud i will def take yours for sure .

as for the wast gate lines going all braided this time . alot of money for a stupid bit of hose and a split second. but cant complain of how the car was hauling before the implosion .

last tune was 255awk so hope this time will be a little bit higher power figure .fingers crossed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You see R34 GTRs listed for 200-300k are they really selling for these prices? Kinda seems like the same ones listed all the time. Even with R33 GTSTs looking at gumtree. You have an auto with a bitsa interior for 35k. Another one needs an engine rebuild and asking 24k. And then you have a stock in better than average condition for 45k. Nobody is ever going to pay these prices.
    • Only needed to pull out the seats, center console and gear shifter surround, took a weekend and a fair few beers. You get to look forward to finding all sorts of weird shit under the seats and carpet, I pulled out a Chinese dudes passport from 2003, 220 yen and a condom wrapper 😆
    • Well, turns out not a lot happened from back then to now, between life again, and working on 3 separate other cars (only one of which was mine, and will now be departing the household soon).   So I decided with the whole "don't go outside, it's a cyclone!" Turning in to being not a whole lot, I ventured down to the garage, found a couple of water leaks in the shed (the main one I've already fixed), and then ended up "stuck" as it started pouring rain, and I didn't want to walk back inside in the pouring rain. This meant I ended up taking a look at the Skyline, and trying to work out what past Matt had been upto. I retraced a few things out from scratch, added the rest of the power feeds in that I needed for the indicators, and headlights. Double checked I'd wired a few things up correctly (and worked out how I wired a few things to begin with), updated my sparse notes. Added one of the ground points. Oh, and got really really dusty, as the car is quite dirty. Wrote up quickly what should be left for me to do with the wiring too. Adding the below photos more for my records than anything else. I need to make myself a proper book for the car that details everything, and how I've done it, but for now, this is my records... The third image is my most important one for me, and I need to draw it out into a proper schematic eventually. The last photo is my re-written list, I'd have put it on the white board, except I had to take the white board down to fix one of the water leaks.
    • Can try Maxima. Or random Infiniti models from the same era. Good luck with your hunt, let us know what you find!
    • Shall we... wake you up when September ends?  
×
×
  • Create New...