Jump to content
SAU Community

Sard 550cc Injectors

yld34t
 Share

Recommended Posts

yld34t Collaborator

yld34t

Posted
Posted

I have 6 SIDE FEED Sard 550cc injectors for an RB25. They have the red plastic top and the number on the top of each injector is 195500-2240.

They are brand new, unused with all o-rings. Reason for sale is I need top feed injectors and foolishly bought the wrong ones! Can also supply machined alloy collars I purchased of Croyden Racing to bolt them into a side feed rail.

Price: $650 delivered for injectors and $150 for the alloy collars. I will send the collars with the injectors if they are purchased together. These are the prices I paid (have receipt for collars). I just want my money back so I can buy the correct injectors!

Any questions please call Toby on 0405 776 191.

Please make sure you have SIDE FEED injectors and NOT TOP FEED ones before purchasing, so you don't make the same mistake as me!!!

Link to comment
https://www.sau.com.au/forums/topic/220631-sard-550cc-injectors/
Share on other sites
yld34t Collaborator

yld34t

Posted
  • Author
Posted

Alloy collars now SOLD!!!

Injectors still available. I will put photos up later. These injectors MUST GO, so I can buy the correct ones for my car. Open to offers........these are cheap for brand new injectors!!

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTS25 NA - Stalling when vehicle is at operating temp

      By GTSBoy · Posted

      It's (the TPS) buzzing? Or something else is buzzing in response? Remove the IACV from the plenum. Block the hole into the plenum with your hand. Get someone to start the car. Let some air is. Do the revs flare up? This is checking that the path into the plenum is clean. After that, is the air hose leading to the IACV fuly clear? After that, either you didn't clean it thoroughly enough to allow the valve to move, or it is broken.  
    • wizlb
      Finding E-30 & E-85 in Sydney

      By wizlb · Posted

      Thanks Duncan 
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      Just a follow-up on this topic. From what I can tell so far the rusty residue on the engine block might be unrelated to a coolant leak or maybe just older than anticipated. After driving it from the winter garage to my friend's garage I could not see any new traces of coolant leaking there, but I will test this properly once I was able to fully warm up the car and drive it for a bit. I think I can agree that the whole porous engine block stuff is kind of nonsense, but there is just a silly amount of true, false and half-true information on anything Skyline-related on the internet.
    • Butters
      UniClutch

      By Butters · Posted

      hrmmm , not mine , easter plans to pull engine not happening     
    • DRoc81
      R33 GTS25 NA - Stalling when vehicle is at operating temp

      By DRoc81 · Posted

      I removed the IACV, cleaned it and reinstalled.  I found a video on youtube that helped with the whole process, the guy then said the idle needed to be set, so the process was to get the vehicle up to operating temperature, unplug the TPS, set the idle screw in the IACV so the RPMs were around 600, then plug the TPS back in.  After I reinstalled the IACV, the car started (because, it was a cold start), once it warmed up, the car died, I adjusted the idle screw to see if that helped anything, it did not, I had to wait about 3-5 minutes, then the car would start back up. Only to shortly cut out, and only crank.  I loosened the TPS to see if adjusting that would do anything, and when I would rotate the sensor clockwise, there was a humming noise, but it would go away when I got the sensor in the horizontal position.  It only made the hum noise with the key on.  What do you guys think? 20250414_172604.mp4
×
×
  • Create New...