Jump to content
SAU Community

Recommended Posts

hi just thought i'd share this

i own an r32 gtst

was driving home last night on springvale road around 12 oclock

where there was this 4wd that was behind me

highbeaming me. keeping in mind that it was only a 60k road.

i tried to speed up but i didnt want to get busted speeding cause was about to

drive past the police station. so everyone time i reached 70 i would brake because i was scared

but at the same time he would creep up even closer then i braked.it was only 2 lanes and there was

a car next to me so he couldnt overtake.

then when the opportunity came for him 3 lanes opend up so he from the far right lane where i was he changed into the first lane(far left) and speed up and changed into my lane again.

i saw him press the brake and though "omg what an idiot to do this"

so i pressed my brake only to find out that he actually came to a complete stop on springvale road

locked my brakes and skidded into the back of his car which happens to have a towbar sticking out.

i got out and said what the f@#k and so on blah blah. said think about it. u went into me.

but i insisted to call the police, yet the police couldnt do anything nor come because no one was injured and no weapons and etc were present. yet 10minutes later the cops ended up coming.

took the stories down as per usual but BY LAW THE POLICE CANT DO ANYTHING ABOUT IT. BECAUSE I HIT HIS BEHIND. i was so angry to hear that because all i got is 3rd party insurance.

the police asked him why did he stop and he said " i saw a dog run past" the policemen asked what color was the dog, he replied "black", policemen said always is a black dog.

breathe tested me and him but i think he failed bought him back to the police station

then an hour later i received a call and was asked to come in on tuesday to write a report

and for them to take pictures, they said he was under the influence of alcohol i asked what he blew, which apparently was over the limit.

so hopefully i can get some money to repair my car.

just though i would share this story to the sau members and be safe on the road.

cause i was shattered to see my car damaged the way it was after i spent alot of time

to get it running in good nik so please drive safe fellas and thank you for listening.\

the damage i recieved on my car was ;

bonnet pushed up

light pushed back

gtr grill cracked

indicator mount broken (left hanging out)

bumper is basically gone

intercooler has a massive dent in it

after driving my car today i felt that i lost power, my boost drops down once it reaches peak

and car stalls when braking and clutching in

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

no worries, dont stress just keep a log of the events etc

he can use his high beam, regardless of speed limit zone, theres no law against using high beam lights, you are encouraged not to blind over drivers, but using them in a 40km/h zone or 60kmh/z or 110km/h zone is fine and acceptable. its your responsibility to keep a safe distance from the car in front so technically its your fault, but if he is under the influence of alcohol then that may instantly void any of the possibilities etc.

he is allowed to stop anywhere on the road in the event of an emergency, ie: i can stop in a 60km/h zone for any reason i see fit as long as my brake lights work.

if you run into me, its your fault you weren't paying attention or because you were travelling too close or too fast.

dont stress at all dude, if they have given him a bretho test and failed, then he is goners and it should be fine

the damage i recieved on my car was ;

bonnet pushed up

light pushed back

gtr grill cracked

indicator mount broken (left hanging out)

bumper is basically gone

intercooler has a massive dent in it

after driving my car today i felt that i lost power, my boost drops down once it reaches peak

and car stalls when braking and clutching in

the car will run like a bucket of crap with a hole in the intercooler or any of the pipework

this is because there is a vacuum leak and its basically atmospheric pressure instead of vacuum

so until you have leak fixed or the core replaced it will run like poo

oh thanks for that paul.

im lucky that my car doesnt run that crap but just runs so shhhhiet and feels so wrong

but inspections and report are on tuesday at the cop shop so im hoping all goes well and his

gone for being over the blood alcohol limit.

fingers crossed

depending on how much he is over, they will blood test him, then that can be used in court if the drunk doesnt want to co-operate with car damages..

i think he will be charged for drink driving, wreckless driving, indangering lives, blah blah blah, and you will be left to get money off him to fix your damages, lol which he will only put on a payment plan 20 dollars a month..

2 wrongs dont make a wright so maybe the cops will deal with him an you will be left to sort your own shit out, unless u were injured in the smash, then i think the cops couldnt care less bout you..

always sucks when shit like this happens..

wouldnt it mean that his not suppose to be driving on the road

cause his endagering lives causing an accident

depends what you're wanting out of it

over 0.05 = criminal offence

stack = civil

being guilty of a criminal offence doesnt automatically make you liable in a civil suit

if you dont get anywhere with him find out where he lives and cause the same damage to his vehicle...

Stupid things like this are caused by f**kwit impatient drivers who dont like skylines...

Sorry to hear bout ur car. Doesnt sound tooo expensive...but still this incident shouldnt have happened...

lol was gonna say the same thing though i didnt want to endorse it....just suggest it. :D

hopefully he'll lose is license for a while, have a hard time getting to work or anywhere else for that matter. but by the sounds of it he wont learn anything and drive anyway.

he can use his high beam, regardless of speed limit zone, theres no law against using high beam lights, you are encouraged not to blind over drivers, but using them in a 40km/h zone or 60kmh/z or 110km/h zone is fine and acceptable.

You can't drive with your high beams on when you're behind someone... Pretty sure the law is within 200m...it might even be 400m.

if you dont get anywhere with him find out where he lives and cause the same damage to his vehicle...

Stupid things like this are caused by f**kwit impatient drivers who dont like skylines...

Sorry to hear bout ur car. Doesnt sound tooo expensive...but still this incident shouldnt have happened...

You might be thinking it but it's a stupid thing to suggest on a forum.

Him blowing a alcohol reading of over legal limit would be a problem, his insurance at no point covers him for driving under the influence of any drug or alcohol. Voiding his insurance, make a claim against his insurer and your mechanic should be able to handle the rest hopefully they pay up and then he has to pay them. This is what often happens.

Just thought it would be worth your while as from now on your should keep a daily log on any progress with date! This will help if you need to take legal action.

In regards to the highbeams, you must not use them within a 200m distance from cars infront (i.e on comming or same direction) as it blinds drivers there is a law for this.

Oh I commend you on your driving, good stuff setting a good example for line drivers.

Edited by DECIM8

That sucks. But I think you will find he will be charged for drink driving and that's it. He did not cause the accident (even though he was being an ass) and his high beaming did not interfere with your vision as you ran up the back of him.

You will most likely have to cough up for yours and his repairs as you were too close. Keep us posted on how it pans out. Good luck.

I was hit in the rear by a taxi once. I was found to be at fault by my insurance company. Why? Because, technically, I didnt provide him with enough room/time to brake once I got into his lane. Basically, he was in my blind spot, and I cut him off in order to turn right into a street. If this gentleman was driving eratically, quickly got into your lane and slammed on the anchors, you could argue the same point right?

Stupid things like this are caused by f**kwit impatient drivers who dont like skylines...

i know for a fact that is true, i had so many people look at my car and shack thier head, know what i did i one time turned around stoped i had mom in my car and called out to the lady is some thing wrong, she comes up and goes yea i got a head acke. i looked at her and i shook my head at her and laughed in her face and drove off, gee why cant they just leave it and not make big fuss by shaking their head and only do it when u look at them so they know, sorry but i hate it

You wont be paying for his damage as he shouldn't be driving at all but not sure about you buddy, like some others says get some legal advice, don't know if u heard of legal aid, they might be able to help.

Edited by BRUNSKIGTST

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As you're looking at using a Link ECU, then large injectors are not a problem. But there's not really any need to go 1000s on an RB20 unless you're planning >>600HP on E85, which would seem unlikely. There are other options for injectors. The Xspurt ones are available from a number of places and you can get them in the mid 600s and 725cc, which is probably a sensible place to be. These are all EV14 based. If you are not using the stock AFM (at all, which would be the case with a Link) then a large turbo intake pipe to suit the ATR turbos is not an obstacle, so you should use one instead of a highflow. Results will be better.
    • Hey guys,  I'm after some advice and this here is the best place to get it imo. I was a member a looong time ago under another account, with a lost email address. Its nice to jump back on and see some of the same names still giving good advice.  I mothballed my car when i moved to perth in 2013, and after getting towed across the nullabor a few times it has officially done more km's on a trailer than under its own power. Now that i have started the process of tidying up and modifying it, i see the fruit available (and the fruiterers selling the produce) is different than back in the day. hence my questions, as i used to 'know' what to get and now, i'm not so sure. Engine wise the car (92 gtst) has a walbro 255, k+n, fmic, cam gears and and turbo back 3"exhaust. Wish list is a Hypergear high flow or ATR43G1, Link G4x and some newer injectors before a tune up. My goals are modest, only low 200's power wise. i know i could achieve this with less, but i've been swapping out old for new where i can. Every cooling hose has been replaced, along with mani gaskets, WP, thermostat and radiator, fuel pump and timing belt, tensioner and idler, and i rebuilt the steering rack. Regarding the injectors, the fruiterers all seem to sell what used to be considered quite large injectors. There are a lot of options for bosch 1000cc EV14's, and i would like to know if that is a suitable choice for my build. Is modern injector design good enough to run these at the low duty cycles that i likely would be? is there a downside to running a too large injector these days? or, would there be an upside to running a smaller injector at higher duty cycle? I can see that there are smaller injectors still available, but the ones i have seen specifically marketed for RB's are pretty large (see: https://golebysparts.au/collections/fuel-rail-injector-kits/products/nissan-rb20-fuel-rail-bosch-980cc-1150cc-injectors-turbosmart-fpr800-regulator-kit), and i dont know enough about them to say one not marketed for RB's would fit or not. I have searched the forums, and amongst all the posts on older tech, I did see gtsboy recommend EV14's, but no size was mentioned... again, i'm not clear on if the smaller size bosch injectors are also EV14's as they do look similar.  also, if someone can recommend a tuner familiar with RB's in the Geelong or West Melbourne area i'd appreciate it. Thanks in advance guys. Cheers, Rowdy  
    • FWIW the depth of the groove in the rubber pad is not super essential, the blocks are rubber and squish a bit. If you are worried an angle grinder will make a deeper groove quick smart
    • I mean, if you were to move the jacking points away from the original location, that is, away from the wheels and closer to the centreline of the car, then it will be more likely to overbalance and tip off the supports. Same as we talked about before. I was talking about moving for-aft. If the sill is bent outward or inward, then the car would obviously look unstraight from the outside. Hopefully that hasn't happened either. Again, you can do comparative measurements from the chassis rails to see if there is much deflection.
    • Can you elaborate what you mean with your first sentence? I meant move as in the bulge kinda seemed like it got pulled "outward" meaning it got pulled down and to the side with the jacking rail itself, so the load bearing bulge now sits lower than usual and is not level with the sill on the other side of the jack point. Either that or the jacking rail just got pushed in a good bit.
×
×
  • Create New...