Wanted To Borrow

[On Edge]

Z32 afm to see if mine needs replacing

[Aberax]

Wanting to Buy or Borrow

RB25DET R33 GTST Heater Hoses', Under plenum, along firewall...anything to do with heater hoses in the engine bay...in any condition - as long as they are the correct length and shape. Would prefer the whole lot from someone if I can.

PM me.

[JiN_MaN]

Letter and Number Stamp Punch set. Needs to be between 7mm and 10mm to meet compliance regulations.

[rad100]

does anyone have r32 gtst lower control arms i can have on an exchange basis? want to get them extended then when i take mine out you can have mine.

[morbsy]

++++R33 GTST defected ++++

Stock front and rear suspension

Stock Exhaust

Stock wheels

if any one has any of these parts they could let me borrow to help me through regency, it would be much appreciated

Cheers, nathan

[HR32GTS 4DOOR]

Anyone have Stock suspension or springs for R32 4 door needed really soon please. PM me.

[Krishy]

I am after half shafts that go from the diff to the hub. Need it by this weekend. It is to suit a R33 GTST.

[gdawg]

+++ R32 GTR Identity Check +++

Stock fuel pressure regulator

I'm thinking i need a stock fuel pressure regulator (suit RB26) to clear ID check.

Mine looks a bit gay with yellow hose and gauge, may cause undue attention

Standard exhaust.

Have recently fitted Cat which quietened it a bit, but its still a bit loud, contemplating fitting a quieter exhaust for the inspection. ? If not available i might chance it. Any thoughts?

[ISC-Performance]

stock S14/S15 wheels with rubber. Just need to use as a spare for the SAU nats weekend incase I have a blow out on the trailor.

[Damo_R34]

you can use mine Ryan, pickup from Salisbury North!

[ISC-Performance]

Cheers Damo! Will contact you later in the week.

[Matty 31]

ryan, if you're driving over with us ive got a pair of 32 GTST stockies with the centres bored out to suit ford hubs that i carry as spares, so if u strike trouble i have them

keep an eye on pressures, that will be the key. Underinflated tyres will heat up excessively and blow out, generally what happens on trucks anyway

[writeoff]

Hi guys.

I need to borrow a pair of stock GTR BOVs. I believe they can be from any of the R32-34 but am not 100% positive. I have a R32 GTR.

I need to lend the BOVs to Simon at Morpowa (Modbury North) to make up a custom return pipe for me as St Marys Collision Repair Centre lost mine when they failed to repair my car over the 12 month period they had it in 2008/9.

Please help me out. I have only had my GTR for 2x 3 month stints since blowing the engine over 4 years ago and in that time have poured thousands of $ down the GTR sumphole yet have had very little enjoyment from it. ATM I am in a very tight fiscal position and will be so until either Shannons finally pay me the $3.5k they have owed me since 2009 or I receive my legal settlement that has been going on since 2002.

Cheers.

David aka writeoff

Edited October 24, 2011 by writeoff

[Ke55pig]

r32 knuckles stock for about 2 weeks

[rad100]

URGENT- any 5stud rims that clear r34 brakes. to use on my fronts so i can fit my fronts on the rear for dyno

will pick up. only need for couple days.

[harleyhansen]

im after a 32 stock zorst that can bolt to a 3 inch cat. cbf changing the dump. anyone pleaseeeee help me out and pm me

[Import S13]

Hey,

I'm after some 5x114.3 rims with legal tread to borrow for a few weeks to just a month tops.

Must be the same sizes and offset all around and no smaller then 16" for the new car.

I will pay for the usage for helping me out of course.

OH, and I wont be driving on them very much as I leave for work for a couple of weeks. I just need something to put the car on.

Edited November 3, 2011 by Import S13

[Damo_R34]

Kye i have S14 rims you can borrow, 3 of them have awesome tread, the other has around 50% tread and is different but shouldnt matter too much if you are just rolling it around. pickup in wingfield!

[Import S13]

Thanks Damo, I will send you a PM when I need them.

Thanks mate

[JiN_MaN]

Im after somebody who runs a VG30 Turbo on an RB20.

Must run:

VG30 15psi (or their abouts)

FMIC

Any injectors is fine

Any AFM is fine

Should be making around the 19-205rwkw mark

Would like to borrow your ECU for 1 day and will give you $50 in return. Would like to get the tune copied by a professional.