Jump to content
SAU Community

Recommended Posts

When The AP Engineering PFC was plentiful and could be imported for around 1k a ramp was worth ~800 for the first tune and then approx 500-600 for further tunes.

The PFC on the other hand was ~1k + ~300 for tunes. So I went with the PFC.

Speak to Jeff at Turbo Tune and see what he does remaps for. The only option these days is to drop a rb26 pfc in to the r32 gtst. It does have additional benifits of inlet air temp sensor correction etc which is handy for those hot days or thrashing it at Mallala.

what cubes said.

oif u can get a PFC cheap as chips.. .then do it, buit personally the remap is the way to go, and dont be folled into thinking that the PFC is better then the Stock ecu as this often is not the case, One example is the stock ECU has detonation control, where as the PFC flashes a light at you.

depends on what power your wanting and what your going to be using the car for...

if its dailey driven and just want abit of a tune then the remap is alot cheaper option then a new computer system for a 32 plus its not defectable.

with the extra cash you save on for a remap you can use to buy some mods for the remap.

Simon the std ecu does have det control but it is very limited.

R32's and RB25's have still cracked ring lands due to det on the stock ecu. :)

Personally I prefer the dash light flashing as you then know something is wrong and can get it rectified.

ImportS13... A remap is defectable but is not 'detectable'. Either is the pfc if you shove the stock ecu's cover on it. :(

nothing is idiot proof... if your thrashing on a 40 degree day with shit fuel, the thing is going to ping to death with even the smartest ecu on board. that said, i like the fact the stock ECU will do SOMETHING rather then NOTHING. a flashing light is well and good but when im on the track i dont look at the dash :(

Agree nothing is idiot proof. If the knock map is tuned conservatively no doubt you will feel the power be sucked out of the car so probably a little better than a flashing light. The other concern would be if its too conservative egt's will skyrocket if you keep stuck in to it.

The rb26 pfc ecu has inlet air temp correction, 20x20 fuel/ign maps (finer tune) vs 16x16 on the std ecu.. another couple of plus but for an additional price. :(

If I could get the ecu remapped for $500-600 and then further tunes for a few hundred I'd jump at it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • EDIT: Just a little info what my tranny is "doing" :   For the long time the trans do this "bad" sound:https://www.youtube.com/watch?v=qs_iTXgDt40 It is literally the same sound and same symptoms(when i push the clutch it quites down) So is it really the shaft bearing?   Also:  i found this on forums: The RB20 and SR20 boxes are nearly indentical inside (rb20 has longer mainshaft)and suffer badly from bearing and selector failures when driven hard   The bearing is true and selector failure kinda too...it is "harder" to get into gears specialy when i drive a little bit hard...
    • We will review wtf is going on, but if you made any donations let me know and i will follow it up with the admins
    • See, that button sounds like perfection Duncan! My eyes really don't like light shining at them from a dash when I'm driving. Being part red colourblind, I've found for most cars that I can change colours on, I set everything to red, so my eyes see the elast amount of colour! I miss normal gauges in cars
    • bro, knowing the Japanese in  the 90's, i wouldn't be surprised if they shared components across their model lineup.
    • Maaaan so many "little" things  i rly hope my old RB20 would be "ok" and not too bad. I try to learn what and what not do i need. I look at crossmember at it looks different...even parts numbers are different. Wiring and all that i rly do not know...yeah someone mentioned the speedo thing. On that yoke clip. I rly do not know what can and cant be done "custom" so that is why iam asking to know and not be suprised 🙂  I know what it looks like  
×
×
  • Create New...