Jump to content
SAU Community

Recommended Posts

Item:

3" one piece dump & front pipe

with genuine NISSAN o2 sensor

Age:

Unknown

Condition:

Very good

Price:

$150 neg

SOLD

To Fit: (What car)

A31 RB20DET, R32 RB20DET, R33 RB25DET

Location:

Melbourne - south eastern suburbs

Contact:

PM

Call/SMS 0416 623 381

Email/MSN [email protected]

Comments:

Up for sale is a mild steel 3" one piece dump and front pipe which comes with a good condition genuine Nissan o2 sensor

Unsure of mileage on the o2 sensor but looks to be in very good condition, genuine NISSAN item so can't go wrong for this price

The dump/front pipes is not made of stainless therefor less prone to cracking and I also believe that mild steel sounds better than stainless. Unknown of brand but looks to be an XFORCE to me but can't verify as there are no tags

Will bolt straight up to any RB20/RB25 turbo as they both have the same pipe pattern and dump/front pipes are interchangeable from R32 - R33

Note it will also bolt up to a S13/S14 if your running an RB20/RB25 turbo on it. Will also bolt up to t3 flanged turbos such as HKS2510, HKS2530, HKS2535, HKS2540

This is a great upgrade for any car, increases flow therefor gaining more response and power which is useful to any street or track driven car

If you have any questions, feel free to ask

Pictures below

:(

d1.jpg

d2.jpg

d3.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, you are right. It seems easier and more reasonable to boost the engine. And as you said the blocks are very similar but the cylinder bores are different.
    • Sound logic, but in actuality way more illegal than just having the wrong pipe. Normally, doing something like that would be forgery. Meaning you may have certain documentation for vehicle parts, but the actual parts are different ones and you just assign them the numbers and badging from the documents. But nevermind that. Nonetheless, I AM curious if this pipe was ever made by any official manufacturer this way, because I honestly am not familiar with this pipe layout and shape. As I will be putting on the HKS Silent Hi Power once my exhaust gaskets arrive, as long as it sounds right I will just roll with this front pipe. I can always order the actual Mines part if I run into legal issues. It would be an unnecessary expense as there is lots of other problems I have on this car as of now.
    • So, weld a plate with the Mines logo laser cut into it, onto it. Instant Mines pipes, whether they were or weren't originally.
    • I don't know if the blocks are "the same". They will be very very similar. Obviously, either the bore or the stroke is going to be bigger on the 20. If the bore is bigger, then the 18 head is unlikely to fit properly. If the bore is the same, then you can almost certainly fit the CA18 head, but there migth be a few fun things you have to do to make water galleries (or other things) line up properly. Or... it could just be real easy. Is it worth the effort? Almost certainly not. You can make nearly as much power on a 2 valv ehead as you can on a 4 valve. There's not any "magic" in a 4 valve head.
    • Yes, me too!!!!  I need to find a something that has all the abbreviations for what these cars have LOL
×
×
  • Create New...