Jump to content
SAU Community

Recommended Posts

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

Originally posted by PHaT MR30

Jap drifting is about being 90 degrees to the corner. before, during and after the corner.

doing a skid round a corner and kicking the back end out is not drift

no its not jap drifting is pointing the nose of the car at the exit angle of the turn. drifting can be done by 6 different methods.

1) E-brake

2) Shift-lock

3) braking

4) Fainto

5) Power over

6) Dynamic

if you really REALLY want to know and want to buy a kick ass DVD you should get the Speacial edition Best Motoring Drift Bible it is bad ass. Keiichi Tsuchiya is teaching you how to properly drift

"funkymonkey" when does it stop being a drift and become a powerslide. it becomes a power slide when you loose traction after the turn has passed, if you slide and hold it anywere before during or just before the end or the corner is drifting, you could use power sliding for drifting also you can power slide one way and when you regain traction it tosses you to the other direction and you use that as a "Dynamic" drift it is really simple after you watch that Video its cool shit.

Originally posted by cowboyb

I just thought drifting was losing traction whilst doing a corner and regaining control from the slide before to slide into a curb...I guess I could be wrong, since I dont drift myself :D

That's pretty much what all the ppl that try to be heros on the city roads do... and that's so not drift... and then they go "aw man did you check that mad drift I just pulled?"
  • 9 months later...

ok, i've seen those tutorial vids too. And it's a load of crap how everyone suddenly goes off using all these terms that the japs use, such as 'e brake' lol, like WTF? i think you mean handbrake?

I agree that these habibs that do fully sick schidds around the corner are not drifting. The idea with drift is put the wheels out of traction while still being in control. I notice that some of you guys reckon that it is not a drift if you are not pointing out before the corner. It is a much safer way to learn drifting by just bringing the back out once in the corner, and working with that first. it gives you an idea of countersteering to regain control. I started like that in the rain. Much less chance of spinning your whole car around or mounting the kerb.

ok, i've seen those tutorial vids too. And it's a load of crap how everyone suddenly goes off using all these terms that the japs use, such as 'e brake' lol, like WTF? i think you mean handbrake?
Yeah that annoys me too, but E-brake is an American term, in the video they mix in the term "side brake" which I presume is a Japanese transliteration...

Well, to me powersliding has always seemed out of control. Where-as with a drift you've still got control of the car as sideways as it is.

I.e. powersliding to me is when the car is sideways, with all four wheels doing absolutely nothing in the way of forward momentum or directional changes. And that its a power slide and your about to hit a pole;)

Who knows, thats how I've always seen it. I know that you can get into slides with power to carry through corners etc, and I don't call that drift.. Alot of cars here flick the ass out coming out of a corner and say, see that drift.. Or fishy it up the road with minor angle on the car and say whoa drifted that.

Whereas its more like, wow, you glorified a chirp.. Let me see you keep that fishy going around the next two corners without killing yourself.

I see drift as a form of powersliding with the occasional need to the handbrake.

Powersliding is more brute power that sends your 'power' sliding out of a corner.

To myself Powersliding is exactly that.. 'Power' 'Sliding' Using power to create a slide, not like drift that some times uses the handbrake or a touch of the brake pedal to help hold the slide a little longer.

Essentially Drifting is powersliding to a certian extent BUT powersliding is not drifting.

If your looking out the drivers side or passenger side window to see where the f**k your going for more than a couple of seconds without spinning or overcorrecting... your drifting :P

sideways is sideways it just comes down to how long you can hold it like that... (directly proportional to the size of your balls)

If your looking out the drivers side or passenger side window to see where the f**k your going for more than a couple of seconds without spinning or overcorrecting... your drifting :P

sideways is sideways it just comes down to how long you can hold it like that... (directly proportional to the size of your balls)

LOL! excellent. :(

Funky, this is drifting...

http://www.carmode.net/carmode/movi...06file/yv86.wmv

Justin, reason you say/see idiots drifting poorly in Skylines is because they haven't setup the car properly and the car is too heavy to start with...plus who drifts in Skylines anyway except for Nomu! Not that it can't be done just not as elegant and sustained with a lighter car and sufficent horsepower.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I mean, if you were to move the jacking points away from the original location, that is, away from the wheels and closer to the centreline of the car, then it will be more likely to overbalance and tip off the supports. Same as we talked about before. I was talking about moving for-aft. If the sill is bent outward or inward, then the car would obviously look unstraight from the outside. Hopefully that hasn't happened either. Again, you can do comparative measurements from the chassis rails to see if there is much deflection.
    • Can you elaborate what you mean with your first sentence? I meant move as in the bulge kinda seemed like it got pulled "outward" meaning it got pulled down and to the side with the jacking rail itself, so the load bearing bulge now sits lower than usual and is not level with the sill on the other side of the jack point. Either that or the jacking rail just got pushed in a good bit.
    • As well as being risky WRT tipping off anyway. Yeah, I wouldn't expect it to move. Just measure from the rear one to the front one on the good side, then measure that same length on the wrecked side. You will find the notches in the pinchweld, and the jacking pad. Just spray a spot of marker paint or something there.
    • but any other area than the bulge you are talking about will just cave in then? The front driver side is pretty bent so I don't know if that will work the way it is now. I can still kinda make out where that bulge is/was but it looks like the position of it also changed due to all the mistreatment? Hard to tell
    • Absolutely. Look very closely at the photo (of yours) that I took my second snip of. See how the sill is thicker material right behind the pinchweld, where the two notches are? That is the factory reinforced area for lifting. That pad is supposed to carry the weight. The factory jack (go look at it, and how it interfaces with the car at the pinchweld) shows you exactly how the load is carried from the car to the jack to the ground.
×
×
  • Create New...