Jump to content
SAU Community

Recommended Posts

Insurance works on things like

1) whether the vehicle is under finance

2) make, model, year, tans, engine size, turbo/NA, etc

3) driver history, age, etc

4) vehicle modifications

5) etc.

Whether you buy a R33 GTS-t (for eg) here or privately import... the insurance costs will be the same (providing the vehicle specs are the same).

Cars purchased here tand to be more expensive as the australian dealers have to make more money to keep shops open, etc.

Paying an agent ~$1000 is a good way to go... that how I got mine!

The only draw-back is you can't test-drive the vehicle/see it for yourself... you only get pictures and an Auctioneers report (you make a decision based on someone elses assessment of the vehicle).

If you don't have alot of $$$, privately improt... if you've got the money... by one here (you can drive it out of the showroom).

You also need a bit of patience when privately importing as from the time the vehicle is found it'll take about 8-12 weeks to get here and on the road!

Your decision... as I said I privately imported mine and haven't had any problem with it!

*Quite a long reponse to a simple question... isn't it?*

Link to comment
https://www.sau.com.au/forums/topic/22099-private-imports/#findComment-472447
Share on other sites

are you talking about an import that you've owned overseas for 12 months (I think they used to have yellow compliance plates), or just the standard imports (green compliance plates)?

If that's what you're talking about, it should be the same, except if you import a car that isn't usually allowed here e.g. the Toyota Chasers weren't allowed in under the old rules. In this situation, the insurer might just say that they've never heard of it and deny you insurance straight away.

Link to comment
https://www.sau.com.au/forums/topic/22099-private-imports/#findComment-472536
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...