Gtr Diff - Locking

[exXU1]

Any one welded up a R32 GTR diff at all - open enough to get a bead in there?

[femno]

I also want to know the answer to this question!!!

Mine cant handle the 320 odd and is open-wheeling...im low on funds and have trackdays coming up!!!

[Beer Baron]

why on earth would you? I'm not diff welding expert but I imagine it will be tricking as the GTR centre is a mechanical clutch pack type LSD. if you want a welded diff at least sell your GTR centre and get a crap GTST diff, weld that and put it in.

[femno]

So a GTSt centre fits in a GTR housing? Or you mean the whole diff as one? What about the ATESSA pump mountings?

You would do this because youre low on money and need some traction at the rear! Im not saying its the best idea, but does the job?

[si]

I also want to know the answer to this question!!!

Mine cant handle the 320 odd and is open-wheeling...im low on funds and have trackdays coming up!!!

GTR diff should be good for lots of power. Get the thing shimmed, don't lock it.

[Duncan]

you can run a gtst centre in a gtr housing no problems. You can't really change to the gtst housing in a gtr as it wil change your rear diff ratio (but not the front diff) so attessa will go all sad.

but you really should just shim up the standard one, you can get it as tight as you like without the disadvantages of a welded diff. under 300 to shim and adjust the stocker

[Swiper the Fox]

early 32 GTR centres are worth next to nothing and Nismo shim kits are about $200...best way to go.

PM me if you want one with kit fitted ready to install.

later R32 centres on the other hand are expensive, much sought after and rare.

[femno]

I thought f**k it, I went crazy and I got myself some 1.49 shims (LOL theyre hardcore thickest ones!) from Nissan, came next day. $6 bucks each!

Im going to chuck them in this week, will post results

Hopefully an insane amount of lock, I just didnt want a welded diff to wreck me suspensions...got a feeling it will be very close-to though.

[VB-]

if you really shim it up, it shoudlnt be as bad as a locked diff, but will still churp quite often on tight bends.

that said i dont see locked diffs as 'bad', infact my minispool was the best $100 i ever spent on my car

Edited July 26, 2008 by VB-

[GTR1993]

early 32 GTR centres are worth next to nothing and Nismo shim kits are about $200...best way to go.

PM me if you want one with kit fitted ready to install.

later R32 centres on the other hand are expensive, much sought after and rare.

What is the difference? and how do you tell them apart?

[steve33]

will it play up wit da 4wd system in a 33?

[Swiper the Fox]

What is the difference? and how do you tell them apart?

I should have taken a pic to show the difference...the early 32 centres are smaller.

[skylineboy84]

what if you just buy a lock diff, i got one in mine, took me ages to find out why my car was always clunking/tyre skipping sound, when turning, the car already had the lock diff in it when i got it

Any one welded up a R32 GTR diff at all - open enough to get a bead in there?

[some_cs_student]

what if you just buy a lock diff, i got one in mine, took me ages to find out why my car was always clunking/tyre skipping sound, when turning, the car already had the lock diff in it when i got it

Are you sure you don't just have a very tight diff? They will act like this around most corners.

What happens if you put the clutch in or neutral, and take a corner pretty slow? Same locking on the corner?

[Guest snotass]

Are you sure you don't just have a very tight diff? They will act like this around most corners.

What happens if you put the clutch in or neutral, and take a corner pretty slow? Same locking on the corner?

Guys please remember this request for diff lock or full spool is for drag application only and i simply want to lock the back diff up to keep her straight as posoble - i have no attesa or hicas etc - all gone - do have to make a choice still have done as yet.

Have engaged an engineering entity that says that bthey willl send me a proto type full spool but sadly have been waiting a very long time - have my doubts wether will come good .

need suggestions lads got to do in next few weeks - any one know where i can get a full spool.

Any examples that you know of with big HP with shimmed up tight rear diff - results ??

[Guest snotass]

I thought f**k it, I went crazy and I got myself some 1.49 shims (LOL theyre hardcore thickest ones!) from Nissan, came next day. $6 bucks each!

Im going to chuck them in this week, will post results

Hopefully an insane amount of lock, I just didnt want a welded diff to wreck me suspensions...got a feeling it will be very close-to though.

Matt,

how did you go here please? Keen to discuss your results.