Jump to content
SAU Community

Recommended Posts

  • 1 month later...

why on earth would you? I'm not diff welding expert but I imagine it will be tricking as the GTR centre is a mechanical clutch pack type LSD. if you want a welded diff at least sell your GTR centre and get a crap GTST diff, weld that and put it in.

So a GTSt centre fits in a GTR housing? Or you mean the whole diff as one? What about the ATESSA pump mountings?

You would do this because youre low on money and need some traction at the rear! Im not saying its the best idea, but does the job?

you can run a gtst centre in a gtr housing no problems. You can't really change to the gtst housing in a gtr as it wil change your rear diff ratio (but not the front diff) so attessa will go all sad.

but you really should just shim up the standard one, you can get it as tight as you like without the disadvantages of a welded diff. under 300 to shim and adjust the stocker

early 32 GTR centres are worth next to nothing and Nismo shim kits are about $200...best way to go.

PM me if you want one with kit fitted ready to install.

later R32 centres on the other hand are expensive, much sought after and rare.

I thought f**k it, I went crazy and I got myself some 1.49 shims (LOL theyre hardcore thickest ones!) from Nissan, came next day. $6 bucks each!

Im going to chuck them in this week, will post results :)

Hopefully an insane amount of lock, I just didnt want a welded diff to wreck me suspensions...got a feeling it will be very close-to though.

if you really shim it up, it shoudlnt be as bad as a locked diff, but will still churp quite often on tight bends.

that said i dont see locked diffs as 'bad', infact my minispool was the best $100 i ever spent on my car :)

Edited by VB-
early 32 GTR centres are worth next to nothing and Nismo shim kits are about $200...best way to go.

PM me if you want one with kit fitted ready to install.

later R32 centres on the other hand are expensive, much sought after and rare.

What is the difference? and how do you tell them apart?

what if you just buy a lock diff, i got one in mine, took me ages to find out why my car was always clunking/tyre skipping sound, when turning, the car already had the lock diff in it when i got it

Any one welded up a R32 GTR diff at all - open enough to get a bead in there?
what if you just buy a lock diff, i got one in mine, took me ages to find out why my car was always clunking/tyre skipping sound, when turning, the car already had the lock diff in it when i got it

Are you sure you don't just have a very tight diff? They will act like this around most corners.

What happens if you put the clutch in or neutral, and take a corner pretty slow? Same locking on the corner?

  • 2 months later...
Guest snotass
Are you sure you don't just have a very tight diff? They will act like this around most corners.

What happens if you put the clutch in or neutral, and take a corner pretty slow? Same locking on the corner?

Guys please remember this request for diff lock or full spool is for drag application only and i simply want to lock the back diff up to keep her straight as posoble - i have no attesa or hicas etc - all gone - do have to make a choice still have done as yet.

Have engaged an engineering entity that says that bthey willl send me a proto type full spool but sadly have been waiting a very long time - have my doubts wether will come good .

need suggestions lads got to do in next few weeks - any one know where i can get a full spool.

Any examples that you know of with big HP with shimmed up tight rear diff - results ??

Guest snotass
I thought f**k it, I went crazy and I got myself some 1.49 shims (LOL theyre hardcore thickest ones!) from Nissan, came next day. $6 bucks each!

Im going to chuck them in this week, will post results :)

Hopefully an insane amount of lock, I just didnt want a welded diff to wreck me suspensions...got a feeling it will be very close-to though.

Matt,

how did you go here please? Keen to discuss your results.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • $53.35 and a double din Pioneer head unit that I have...
    • Put a camera facing your dashboard so you can film the gauges. Head out to a straight but of road, and filming it as you go from a stand still at wide open throttle to as fast as you can/feel comfortable doing. Then film the dash board as you for example accelerate like normal onto a freeway. This will give us an indicator from Speedo of your expectation of slow, and will give us the rpm reading too to see if it's shifting. (Auto still has tacho from memory)
    • Buy yourself the cooling system pressure tester. Being able to pump it up, and have a gauge on it, AND have a cold engine makes it much easier / practical to diagnose. Additionally as the engine isn't running, you can listen for pin hole leaks as well as watching if pressure drops away. In addition, you can pressurise and while doing so, watch all the little rubber hoses. Some fail very brittle, and will just leak, while others can end up very soft and bulge. While a bulging hose isn't necessarily leaking, one of those small ones starting to stretch / expand in a bad way is an indicator that you'll be looking to replace that one soon   Depending on if this is a project car, or you'll be dailying it in the summer months would alter how I'd be most comfortable with driving the car and how I'd replace. If you're planning to use it as a daily, with no backup, I'd pull the engine, and replace all the external oil/water lines in one big swoop. At the same time do the timing belt, water pump, tensioners etc. Do not open the engine at all. We just want to replace all the things that are inexpensive as a single item, but a PITA when they go. By doing the above, you've made the car from a bunch of age related issues more reliable. If it's a project, and you like swearing while trying to reach into dirty hard to reach places to replace a single hose that may or may not be the leaky one. Just replace the leaking/bad ones as they need it. If it's a project and you'd rather swear at the car once and enjoy it as much as possible, then refer to the process I mentioned in how I'd want to do it if it were a daily. However, the approaches above do come down to how much spare pocket change you have. Pulling the engine and dropping over a thousand dollars on parts, may not be practical for you. Oh, if engine outing, I'd replace as many silicon/rubber inlet joiners as possible too.
    • Yeah, they're pretty dumb though...ie; they'll throw a solenoid error if the solenoid is dead, shorted, wiring is open circuit, or even if the driver transistor has failed (they can't self-diagnose much, they can only test inputs/outputs)... but if you wanted to try, I believe it's this protocol....(uses a long pulse indicator with short pulse counter)...    
    • Yeah I'll do what I can without taking off any major parts for now. If it becomes clear I won't get far with the engine in the car I'll have to think about the next steps. I am not too stuck on keeping everything 100% OEM, if there is better solutions, like converting most lines to braided with AN adapters, I'd rather do that than buy overpriced new "shit" parts.
×
×
  • Create New...