Jump to content
SAU Community

Query: V35 Top Speed

rip
 Share

Recommended Posts

rip Rookie

rip

Posted
Posted

hey fellas if someone can help me with the Question.

What is the top speed for the speedo dial of the skyline V35? Is this the top speed it actually does?

Link to comment
Share on other sites
MaXiMuS007 Mentor

MaXiMuS007

Posted
Posted (edited)

Japanese cars are electronically limited to 180km/h - this is why they all have 180km/h speedos.

You can get speed cut defenders which will remove the limit.

Anyone know how fast it would go without the limiter? My guess is 240-250ish (it does have a low Cd)

Edited by MaXiMuS007
Link to comment
Share on other sites
mellowman Enthusiast

mellowman

Posted
Posted

my mate the other day in his 350z hit 230km and it wanted to keep going so perhaps around 250 maybe more...

has anyone tried to take their v35 over 180?? does it speed limit and loose power?? what happens

Link to comment
Share on other sites
prdreilly Contributor

prdreilly

Posted
Posted
my mate the other day in his 350z hit 230km and it wanted to keep going so perhaps around 250 maybe more...

has anyone tried to take their v35 over 180?? does it speed limit and loose power?? what happens

I found that it went about 8 Km/h off the end of the dail, before it hit "the wall". Nothing dramatic, still smooth, just stops accellerating.

Link to comment
Share on other sites
NISMO Grand Master

NISMO

Posted
Posted

On the track, the car gets to 180 quite easily and I would guess it's got a lot more in it. From memory it was around the 4500-5000rpm range in 5th gear. I've done a cruising lap where it was in 6th sitting at just over 3000rpm doing 160-170km/h

Link to comment
Share on other sites
spikey Community Regular

spikey

Posted
Posted
my mate the other day in his 350z hit 230km and it wanted to keep going so perhaps around 250 maybe more...

has anyone tried to take their v35 over 180?? does it speed limit and loose power?? what happens

I've done twice top speed on my v35, it's speed limit. u will feel the power banned even you hit the pedal.

Link to comment
Share on other sites
scathing Grand Master

scathing

Posted
Posted

Non-JDM 350Zs have a 250km/hr speed cut. I've hit 243 (speedo indicated) before, and that was a struggle to reach even though I was near peak torque.

Theoretical top speed is around 300km/hr with a 6MT, if you crunch the numbers and calculate with a 6850RPM fuel cut. There's no way a NA FM platform car is going to reach it though.

Link to comment
Share on other sites
rb26stagea Grand Master

rb26stagea

Posted
Posted

look at the gear ratio for 6th gear (in a manual), and cross reference it with the known rev cut in the car: it will give you the theoretical top speed, ignoring friction, wind resistance, etc...

Link to comment
Share on other sites
MaXiMuS007 Mentor

MaXiMuS007

Posted
Posted

Gotcha...

Engine Speed to Speed of Car:

v = 2πrω/Ggk

where:

v=velocity (m/s)

r= radius of tire (m)

ω= engine speed in rotations/sec

G= final drive ratio

gk = k-th gear ratio

Assuming 6MT with 18" wheels & stock tyres, theoretical top speed = 300.1264km/h!

Link to comment
Share on other sites
MaXiMuS007 Mentor

MaXiMuS007

Posted
Posted

I've spent far too much time this afternoon trying to develop a spreadsheet to do the top speed calcs. The calcs are based on a 6MT on 18s and the spoiler (Cd=0.28).

I can't find any firm data on the frontal area of the vehicle, so I have assumed Ap=2.5m^2.

The theoretical maximum speed is ~308km/h based on the peak power figure alone. Obviously this will be limited by gearing and air resistance.

The maximum real speed I calculate is 281.02km/h... this corresponds to 6150rpm in 6th gear. Air density is assumed as 1.204 @ 20degC.

FYI, if the frontal area is actually 2.8m^2, maximum speed reduces to 269.65km/h.

Lower temperatures (higher air density) will also affect these figures.

Link to comment
Share on other sites
scathing Grand Master

scathing

Posted
Posted

I was considering putting a 3.9 final drive in my diff, so I had a look at how it would affect my in-gear speeds.

This table provides the data, although it does need to be updated for the HR engines' cutout and the possibility that some FI guys might want to run the 3.2 final drive out of the auto diff to make more use of their wide spread of torque. I know, if I was going TT, I would.

Link to comment
Share on other sites
matt smith Rookie

matt smith

Posted
Posted

I have a gt-8 and have done a couple of runs recently to test exactly that for my own curiosity.It certainly wasn't limited at 180 and still had heaps left at 210,but ran out of road.i will say it gets there in no time as well.

Link to comment
Share on other sites
MaXiMuS007 Mentor

MaXiMuS007

Posted
Posted

If anyone is interested, I've attached my top speed calculation spreadsheet. Defaults numbers belong to a 2003 6MT 350GT. Spent WAAAAY too much time on it.

Feel free to play around with it as you wish. It should work for any vehicle (with a maximum engine RPM of 8600)

Speed_Calcs.zip

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • defari
      Spotted - QLD Skyline Owners

      By defari · Posted

      EMJ33 or EJM33 - west end
    • TurboTapin
      GReddy Injector Help!

      By TurboTapin · Posted

      I have a radium fuel rail on my Greddy manifold and used the supplied radium fuel injector to manifold adapters (The round green things pictured). I did always wonder if you could just go ahead and use the second lower hole like you're doing... Wouldn't thicker o-rings solve your issue?    
    • MBS206
      Does anybody use the Firestryker or Element sticks?

      By MBS206 · Posted

      From what I've seen and experienced first hand with those powder extinguishers, they're good to use to break a window and escape the car, and half the time then do f**k all to stop a fire. You just need much more than 1KG worth of powder. Not to mention, half the time it's an engine bay fire, and you can't easily, and do not want to completely open the bonnet, so you're left pretending to be an American Infantry... Spray and Pray baby!   And then 100% that shit is really destructive afterwards!   Realistically, those little ones at a race track might help you keep the fire from growing and give the fire marshal / truck a chance to actually get to you with their multiple large bottles.   For a road car, these days, prepare to deboard as quickly as humanly possible, and move to safety. Allow insurance to fix replace it (unless it's like a rare classic etc, then do nearly everything possible to save it!) Keep the little extinguisher with you to help protect other things around you from burning while you stand there singing "How can we sleep while our beds are burning?"   Secondly, powder extinguishers I freaking hate for indoor use, (this isn't really relevant to a car) as you will get a powder fog around you, and it can be disorientating.   When I did fire training when at BlueScope Steel, they have (had?) their own fire brigade on site. We did all the training, and at the end we were told, "If it's an indoor fire, and you need to use a powder extinguisher, we as the fire brigade would rather you just exit the building, you're more likely to get lost in the smoke and powder fog than do much help, so just GTFO" And pretty much that was what they said for most other fires too, grab extinguisher, if it's much more than paper in a bin fire, use extinguisher to get you and others out of the building to safety...   Part of me wishes when my Skyline caught alight many moons ago, I let insurance sort it out, instead of putting the fire out... part of me now says "But I've saved a classic before it was a classic!"
    • ChoppedSpots
      GReddy Injector Help!

      By ChoppedSpots · Posted

      Hi all,  I have a older model of the Greddy Front facing intake on an RB25DET NEO Head. I've bought aeroflows fuel rail and injector kit (1000cc Bosche injectors) and I'm unsure if the fitment is correct. The injector o-rings fit in the intake hole but it's not snug. I can very easily rotate the injectors even when the fuel rail is mounted. The kit also came with multiple adaptors, they dont make it any more snug and using them raises the injectors up and i cant mount the fuel rail. I hope this makes sense I've asses a few photos.    Thanks so much guys. 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So, to run the 4g aerials to the booster, I had to get access to the rear bulkhead....bit of a mission. Hot tip, don't offer to help change the rear shocks for a mate with a v37.... Remove seat base, 2 clips that slide forward to release it the it lifts straight out Fold down rear seat (pull in from boot) The side bolster of the rear seat is not connected to the middle parts that fold. To remove unbolt at the bottom bolt then push it up off the top hook Then there is a plastic surround behind the seat back, 2 pop out clips, 2 bastard clips, some swearing at it is out Pop the rear seat latch surround off Remove door surround lower trim then side trim  Remove c pillar trim - 4 clips, pull inwards not forwards Remove metal brace - 5 bolts 1 nut Then you have got to the rear strut top...what a pain!
×
×
  • Create New...