Jump to content
SAU Community

Query: V35 Top Speed

rip
 Share

Recommended Posts

rip Rookie

rip

Posted
Posted

hey fellas if someone can help me with the Question.

What is the top speed for the speedo dial of the skyline V35? Is this the top speed it actually does?

Link to comment
Share on other sites
MaXiMuS007 Mentor

MaXiMuS007

Posted
Posted (edited)

Japanese cars are electronically limited to 180km/h - this is why they all have 180km/h speedos.

You can get speed cut defenders which will remove the limit.

Anyone know how fast it would go without the limiter? My guess is 240-250ish (it does have a low Cd)

Edited by MaXiMuS007
Link to comment
Share on other sites
mellowman Enthusiast

mellowman

Posted
Posted

my mate the other day in his 350z hit 230km and it wanted to keep going so perhaps around 250 maybe more...

has anyone tried to take their v35 over 180?? does it speed limit and loose power?? what happens

Link to comment
Share on other sites
prdreilly Contributor

prdreilly

Posted
Posted
my mate the other day in his 350z hit 230km and it wanted to keep going so perhaps around 250 maybe more...

has anyone tried to take their v35 over 180?? does it speed limit and loose power?? what happens

I found that it went about 8 Km/h off the end of the dail, before it hit "the wall". Nothing dramatic, still smooth, just stops accellerating.

Link to comment
Share on other sites
NISMO Grand Master

NISMO

Posted
Posted

On the track, the car gets to 180 quite easily and I would guess it's got a lot more in it. From memory it was around the 4500-5000rpm range in 5th gear. I've done a cruising lap where it was in 6th sitting at just over 3000rpm doing 160-170km/h

Link to comment
Share on other sites
spikey Community Regular

spikey

Posted
Posted
my mate the other day in his 350z hit 230km and it wanted to keep going so perhaps around 250 maybe more...

has anyone tried to take their v35 over 180?? does it speed limit and loose power?? what happens

I've done twice top speed on my v35, it's speed limit. u will feel the power banned even you hit the pedal.

Link to comment
Share on other sites
scathing Grand Master

scathing

Posted
Posted

Non-JDM 350Zs have a 250km/hr speed cut. I've hit 243 (speedo indicated) before, and that was a struggle to reach even though I was near peak torque.

Theoretical top speed is around 300km/hr with a 6MT, if you crunch the numbers and calculate with a 6850RPM fuel cut. There's no way a NA FM platform car is going to reach it though.

Link to comment
Share on other sites
rb26stagea Grand Master

rb26stagea

Posted
Posted

look at the gear ratio for 6th gear (in a manual), and cross reference it with the known rev cut in the car: it will give you the theoretical top speed, ignoring friction, wind resistance, etc...

Link to comment
Share on other sites
MaXiMuS007 Mentor

MaXiMuS007

Posted
Posted

Gotcha...

Engine Speed to Speed of Car:

v = 2πrω/Ggk

where:

v=velocity (m/s)

r= radius of tire (m)

ω= engine speed in rotations/sec

G= final drive ratio

gk = k-th gear ratio

Assuming 6MT with 18" wheels & stock tyres, theoretical top speed = 300.1264km/h!

Link to comment
Share on other sites
MaXiMuS007 Mentor

MaXiMuS007

Posted
Posted

I've spent far too much time this afternoon trying to develop a spreadsheet to do the top speed calcs. The calcs are based on a 6MT on 18s and the spoiler (Cd=0.28).

I can't find any firm data on the frontal area of the vehicle, so I have assumed Ap=2.5m^2.

The theoretical maximum speed is ~308km/h based on the peak power figure alone. Obviously this will be limited by gearing and air resistance.

The maximum real speed I calculate is 281.02km/h... this corresponds to 6150rpm in 6th gear. Air density is assumed as 1.204 @ 20degC.

FYI, if the frontal area is actually 2.8m^2, maximum speed reduces to 269.65km/h.

Lower temperatures (higher air density) will also affect these figures.

Link to comment
Share on other sites
scathing Grand Master

scathing

Posted
Posted

I was considering putting a 3.9 final drive in my diff, so I had a look at how it would affect my in-gear speeds.

This table provides the data, although it does need to be updated for the HR engines' cutout and the possibility that some FI guys might want to run the 3.2 final drive out of the auto diff to make more use of their wide spread of torque. I know, if I was going TT, I would.

Link to comment
Share on other sites
matt smith Rookie

matt smith

Posted
Posted

I have a gt-8 and have done a couple of runs recently to test exactly that for my own curiosity.It certainly wasn't limited at 180 and still had heaps left at 210,but ran out of road.i will say it gets there in no time as well.

Link to comment
Share on other sites
MaXiMuS007 Mentor

MaXiMuS007

Posted
Posted

If anyone is interested, I've attached my top speed calculation spreadsheet. Defaults numbers belong to a 2003 6MT 350GT. Spent WAAAAY too much time on it.

Feel free to play around with it as you wish. It should work for any vehicle (with a maximum engine RPM of 8600)

Speed_Calcs.zip

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      PRP RB26 cast block + head prototype running

      By GTSBoy · Posted

      Nah, it's not the reduced knock margin. It is a direct mechanical effect of having to initiate the combustion earlier, while the piston is still rising, which starts to exert combustion pressure on the rising piston earlier, making the rest of the engine work harder to finish driving the piston up to TDC where the combustion pressure stops being a negative and starts being a positive. Your modern engine that only needs ~10° to make MBT doesn't waste the other 10 or so degrees of crank rotation. That's almost all of it. The difference in knock margin might go either way. Remember that modern engines to which you are currently comparing the long tractor engine (the RB) are now running super high compression, direct injection, tricky cam control and maybe even cylinder pressure sensors. You're not comparing apples with other fruit. It's apples and sea weed, or some other evolutionarily primitive vegetation. And remember, squish only really comes into play at the very end of the stroke. It certainly does good things, but it is not the biggest contributor to what's going on. It is quite possibly much less important in 4 valve head than 2 valvers also, because there is so much less squish available to a 4 valve anyway.
    • Dose Pipe Sutututu
      PRP RB26 cast block + head prototype running

      By Dose Pipe Sutututu · Posted

      Food for thought, a longer stroke motor would need less ignition timing vs. a shorter stroke motor requiring more ignition timing.
    • PranK
      Skid pans in/around Sydney?

      By PranK · Posted

      Thanks Duncan, HART is only 10 mins from me (I did my bike license there), it'd be awesome if it ran these types of things.  Sutton Road does look good and they take fewer cars than SMSP which is good.  Surely you have enough land to lay a few million tonnes of concrete and some sprinklers D? 
    • joshuaho96
      PRP RB26 cast block + head prototype running

      By joshuaho96 · Posted

      I thought an engine that needs more ignition timing to make power is going to result in less power due to reduced knock margin? More time for the combustion to propagate -> more time for it to heat up the rest of the mix to detonation.
    • defari
      Destiny 2

      By defari · Posted

      DCS, war thunder, IL2 - mostly flight sim games.
×
×
  • Create New...