Jump to content
SAU Community

Recommended Posts

hi guys,

i notice that washing off the exhaust fumes around the rear bumper/tail section is hard to come off & normal car wash dont take it off!

what should i use...i know that car polish works but its a pain in the butt, so does kerosene but i dont think its good for the paint - i want something that doesnt damage the paint work.

regards,

Maquires Paint cleaner

Maquires Tech wax

Use in that order, perhaps use the paint cleaner twice it removes surface contaminates such as oil, tar blah blah blah. its very good at cleaning headlight lens too.

the wax will put a clear coat of protectant on the bumper to prevent oil and so on sticking to it.. this should be reapplied after 24 hours to provide maximum protection.

Once this is done the fumes will come off 90% under water 10% may require a scrub. The wax will need to be reapplied at least every 1 month, I do so every two weeks.

I've seen carbon style stickers that people have put on around the exhaust area to stop it getting on the car has a silver edge aswell, looked quite nice. no idea where they got them from

geez the brownish haze I get above the exhaust comes off with soapy water and a sponge..

you must have some sort of super staining fumes there...?

im surprised u can wash the fumes off with just soap - what soap & sponge do you use? maybe this armour all car wash i use is crap...the sponge i have is the normal beige sponge stuff

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...