Jump to content
SAU Community

Recommended Posts

AE86's with their standard engines are quite gutless. But the handling is magnificent.

I would recommend an mx5, chuck some semi-slicks on and some good pads, exhaust and you're ready for some superfun track days :)

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

u want something that handle well and got poweR? easy man get a Datsun 260z or 280z depending if you like the looks i have 1 they are awsome get one thats worked with a 2.8L and triple carbs head work they make more than 150kw @ rears and the sound of the motor is unbelievable at hight revs and its unique not ever person on the street has 1 and alot more people will respect you for it!

for a good built datsun you will be looking at 13g's for 1 that is in mint cond! look into it man you wont regret it

here's an idea

get a stock shitter - dont spend any $ on it

then when your off your p's buy a 15k GTST that has all the work done to it (tons of them out there) and away you go

youll have a cheaper car to run on your p's, insurance will be less, if it gets flogged etc or you bust it, no big loss

then when your off your p's you can instantly upgrade (as youll have money left over) to a nice GTST

youll get a better car, better quality, more safer, and it will have some basic mods too

here's an idea

get a stock shitter - dont spend any $ on it

then when your off your p's buy a 15k GTST that has all the work done to it (tons of them out there) and away you go

youll have a cheaper car to run on your p's, insurance will be less, if it gets flogged etc or you bust it, no big loss

then when your off your p's you can instantly upgrade (as youll have money left over) to a nice GTST

youll get a better car, better quality, more safer, and it will have some basic mods too

Best advice ever!

I wish someone told me this when i was on my P's and spending useless $$$ doing up a Commonwhore which even after modified was still nowhere near as good as a stocker GTR.....

Save ur cash dude...

Few options put on the table.

* AE86

* Pulsar SSS N14 or N15

* MR2

* MX5

* AE101 or AE111

* NA Supra (I think newer ones may come close to power to weight limits though)

* R31 Skylines

* Integra or Civic

Others I can think of.

* 1976-8 Celica. RWD NA.

http://www.carpoint.com.au/used-car/DATSUN....aspx?State=VIC

thats hot!

Its going to be hard to drive a different car to a skyline though :down: the interior and handling on them (even the n/as) are awesome, I am even thinking of a n/a 34 and just turbo it once i'm off Ps. They are quite a bit of money though.

AE86 is way too over priced and there getting quiet old

I would go for a clean SR20DE S13 5 speed.. You would get good milage and also be reliable. You can still make it look good at least, tuff wheels etc

I can think of 1 for sale at the moment, pretty mint condition inside and out, black in colour and its under 5k.. just needs rego and RW as its a fresh import but has been complianced

I also think a 96 model and up Honda Civic would be good, get the VTECH version and do little upgrades like induction, exhaust etc

They are still fun little cars to drive

Go for a newer car so you will at least get some resale value on it when you upgrade in a few years time, you also want something that you won't be repairing/spending money on every weekend so try and find someone reliable

http://www.carpoint.com.au/used-car/DATSUN....aspx?State=VIC

thats hot!

Its going to be hard to drive a different car to a skyline though :down: the interior and handling on them (even the n/as) are awesome, I am even thinking of a n/a 34 and just turbo it once i'm off Ps. They are quite a bit of money though.

I reckon that's ugly. 240Z's and 260Z's look heaps better.

I don't know about you but I hate driving a heap around. I definitely couldn't do it for 3 years on P's. At least get something that's a bit unique.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I personally would go with cutting out the rubber. Then deal with getting sleeve off separately. Rubber can be painful to cut, it loves to jam up cutting tools. I normally have success with drill bits, deburr bits, angle grinders, jigsaw, reciprocating saw, and never forget... fire. Obviously different tools won't work in all locations you're trying to work with, and you need to be comfortable with each. You personally may be happy slowly slicing it out with a razor blade, if you are, go for it with one too! Feel free to wait for others to weigh in also on their thoughts.
    • So ... I got everything disconnected and started dropping the frame. Three of the four mounts started to come down but the fourth one (the one with the nut that gave me all the trouble) won't budge. The inner metal sleeve stays up tight against the chassis rail although the outer part of the mount drops a bit (and can be levered quite a lot more) but it's just stretching the rubber bushing. So I reckon there's some serious corrosion inside the inner sleeve and holding it tight to the lug at the top of the bolt. Tried everything I can think of so far: penetrating oil, whacking the top of the sleeve to vibrate it and wedge a screwdriver blade in there. I also tried to turn the inner sleeve a bit by hitting it with a chisel at the bottom. It's stuck solid. What do you think about cutting the rubber with a blade so I can drop the subframe around it anyway. Then worry about getting the inner sleeve off after? Will that work? Is it gonna give me even more problems?
    • Steam valve seals are usually responsible for cold start smoke, it goes away once engine warmed up. Disconnect it let engine breathers and let it breath freely, see if problem goes away after a short drive. Also check to make sure engine oil drain pipe is not blocked or kinked. 
    • Haha thanks! Yea I'm moving over from 2x 1000cc jets pre throttle over to 6x 190cc direct port jets and 1x 500cc pre throttle jet.  Direct port comes with all the advantages you would expect, except that pre throttle does cool down IAT'S more. That's why my direct port nozzle placement is closest to the plenum as possible in the runners to allow the air more time to cool before being sucked in. I'm also putting that one 500cc pre throttle jet to help with more cooling. It's a hybrid system. There's a lot more advantages to moving over to a PWM solenoid with a constant pressure system vs my old PWM pump setup, but I'll get more into that once I'm done converting everything over. The ricer in me is excited to see SS tubing all over my manifold though!
    • Very cool, see what I did there? 🥲 Wild WMI setup, first I've seen where it's on each cylinder runner, usually I see a single jet pre throttle.
×
×
  • Create New...