Jump to content
SAU Community

Recommended Posts

Item:Exedy sports tuff heavy duty organic clutch kit includes, plate, presure plate, spigit bush and clutch alginer

Age: Brand new

Condition: Still in Box and rapping

Price: $400

To Fit: R33 gtst may fitt other models but not sure part number is nsk -7056hd

Location: Newcastle

Contact: call me or measage on 0423144911

Comments: Will post iteam but buyer will pay for postage

Item : Advan light weight three spoke wheels with bright red anerdised dish

Age: Unsure

Condintion : Over all very good some minnor marks and scratchs. Front tyres almost new, rears need replacing

Price: $1200 ono

Fit : R33 gtst 5 stud pattern unsure on offsett.

Contact: call me or measage on 0423144911

I am also looking into buying back my skyline after it was writen off last week. Measage me with any parts you may want. I want to have as many buyers as posible because i don't want the car or parts sitting around to long thanks.

Front end of the car is relatively untouched. So everything under the bonet is in good condintion car ran like a dream before the crash. Head lights and front mount are untouched as is bonet, boot lid and tail lights. The gearbox should be ok but i am unsure since i haven't been able to get under the car. The diff and drivesharft should be sweet to. So let us know and no reasonble offer will be refused.

Link to comment
https://www.sau.com.au/forums/topic/221623-r33-gtst-parts/
Share on other sites

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

I have the front bar which needs a respray and repairing in the passanger wheel arch. Rear bar is unmarked from the acciedent and the passanger side skirt is complete but has a spider fracture in the paint. The drivers side skirt is stuffed there is nothing left of it Umm i am unsure how much these kits are going for heres some pics make a offer and i will consider it. I will find out tomorrow if i get the car back or not.

post-43710-1212285090_thumb.jpg

post-43710-1212285164_thumb.jpg

post-43710-1212285220_thumb.png

post-43710-1212285267_thumb.png

Link to comment
https://www.sau.com.au/forums/topic/221623-r33-gtst-parts/#findComment-3909741
Share on other sites

its a 5 month 95 model 1.5 seriers ? not sure about the 1.5 and i don't know if there the same or not as a seriers one but there pritty good theres a tiny mark on the corner of the drivers side head light which can be polished out but it isn't broken and there not cloudy. Sorry about the pic will be able to post more detailed pics up this weekend when the car is back home.

post-43710-1212410908_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/221623-r33-gtst-parts/#findComment-3912682
Share on other sites

Item: Head lights pair

Age : Unsure

Condintion : Good

Price: $400

Fitt : R33 gtst series 1.5

Item : Apexi front mount and mountings and piping

Age : Unsure

Condition : Very good

Fitt : R33 gtst rb25

Price : $450 ono

Size : Not sure as yet will get measurements and photos very shortly

Comments : Front mount is in very good condintion and all piping is secure and well made. The reo has not been cut so as far as i have been told by the bloke that complanced the car it is legal and dosen't need a engineers cert

Item : Stock suspension

Age : Unsure front left hand shock only 3000 km old KYB brand

Condintion : reasonble

Fitt: r33 gtst

Price : $200 ono

Item: Dump pipe back exhuast Jasma mufflers 3 Inch

Age : Looks reasonbley new

Condintion : Over all very good expect a few slight scraps from the car beening to low it was than rasied, and intermedate muffler is bent but is not leaking $80 to repair muffler

Price : $400 ono

Item : DBA 4000 seriers Slotered rotors and bendix ultimate pads for the front

Age: 2000km old

Condition : Near new

Price : $450 ono

Item: r33 gtst Radiator

Age: Unsure

Condintion: Good

Price : $200 ono

Item: brake master cylinder

Age: Unusure

Condintion : good

Price $150 ono

Link to comment
https://www.sau.com.au/forums/topic/221623-r33-gtst-parts/#findComment-3915122
Share on other sites

hey guys heres the pics of a few parts. Also the car is now completely striped and parts are ready. Heres a quick update on parts.

Front struts complete rears could not be salavaged $100 for the pair

Dash cluster 78 000kms on it $60

diff and craddle and stub axile will seprate if required $500

Front stub axile and upper control arm $300 for the pair

lower control arms $200 for the pair

DBA 4000 seriers rotors 2000 km old and bendix ultimate pads $400

Seriers 2 light up skyline rear garnish lights up blue $80

anything else require pm me more photos will be up tomorrow for exhuast and other parts

post-43710-1213004220_thumb.jpg

post-43710-1213004267_thumb.jpg

post-43710-1213004294_thumb.jpg

post-43710-1213004317_thumb.jpg

post-43710-1213004343_thumb.jpg

post-43710-1213004430_thumb.jpg

post-43710-1213004545_thumb.jpg

post-43710-1213004613_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/221623-r33-gtst-parts/#findComment-3930228
Share on other sites

Motor and box sale fell through so both are up for sale

Item : 1995 r33 Complete Motor rb25 stock everything included all pumps and alternator and air cond compressor loam and stock ecu

Condintion : 78000 km on it Ran perfect no oil leaks at all

Price: $1800 ono

Item : r33 gearbox + slave and clutch master + flywheel and brand new exdey heavy duty clutch kit tail sharft and also clutch pedal

Condintion : 78 000km very good very minnor oil leak from rear extention houseing seal its like a $30 seal

Price : $1800 ono

Comment : sorry no clutch fuild line is avaible due to it been cut as it was not going to be keept other wise full manual kit aviable will throw in engine ecu if required

Link to comment
https://www.sau.com.au/forums/topic/221623-r33-gtst-parts/#findComment-3933182
Share on other sites

Dash cluster work ok?

And How much are you after for the passenger side front guard (if its straight)

Cheers

Heya mate yeah the dash cluster works fine it escaped damage but the passanger gaurd would be in realy good nick if the ambos didn't stuff it

Link to comment
https://www.sau.com.au/forums/topic/221623-r33-gtst-parts/#findComment-3933415
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, that is a helpful description, because that sounds exactly like a bleeding issue in the clutch....these are hard to bleed manually even when the damping loop has been removed. I'd suggest bleeding again....start by filling the master cylinder up and opening the bleed nipple. Come back and check every now and then that the master cylinder is not empty. Let it gravity bleed for a few hours and see if that improves
    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
×
×
  • Create New...