Ebc Install Now Not Starting?

[Hijacker...]

Snap! Peoples, please help me! A mate and I fitted and wired in an AVCR to my S15 today and when finished tried to start it up, key in and turn = eng cranking but no starting Arrrrrrr! So checked everything again = still not starting, checked the ECU loom and found it wasn't quite plugged in properly on one side so pushed loom on more and tightened the screw tighter = started

Then I took it off again LOL and tidied up the wires and put back on = not starting again

Still ain't starting!!!!!!

Could smell fuel and could see fuel vapor in side the zorst, could it of flooded so bad that it want start?

If so, why would it of flooded that bad?

I double checked all the wires individually going into the loom and all seems good!

Could it have hurt anything besause it wasn't plugged in properly?

I was thinking maybe a fuse is blow or something? Could this be possible?

Edited May 31, 2008 by Hijacker...

[Hijacker...]

All good now Just a simple blown IGN fuse LOL Tuned the boost and tweeked the tune as well (thanks to my mate) and going harder then ever!!!

Edited June 2, 2008 by Hijacker...