Jump to content
SAU Community

Recommended Posts

Hi all,

im looking at building a Gaming PC using the following parts. What do you all think? good or bad? suggestions would be welcome!

AMD Athlon 64 X2 6000+, dual core, socket AM2, 3GHz

2GB DDR2-800 PC6400 SDRAM

Gigabyte GA-MA790FX-DS5 AMD 790FX ATX

GeForce 8800 GTS 512MB, (G92) PCI Express

All in all it should only cost around 730... im planing to hook this up to my LCD so i can use the keyboard and mouse instead of the homo controllers of the ps which i cant stand. Plus i will have one insanely large monitor.

Link to comment
https://www.sau.com.au/forums/topic/221918-gaming-pc/
Share on other sites

If you want to go with AMD then tweak it slightly, for $50 more you can do better (at MSY, see parts list http://www.msy.com.au/Parts/PARTS.pdf )

Get the better chip, better mobo, better card

AMD2 6400+ $185

Gbyte GA-MA790FX-DQ6 $265

Asus 8800GT 1gb $265

2gb ram $55

total $770

Id say the 1gb GT would work better than the 512mb GTS on the Large screen LCD you'll use.

If you want a bigger card ($300 more for 1gb Asus 3870 x2) you need a 850w Coolermaster realpower Pro for $240.

$$$$ adds up when you want the good graphics cards

I run a q6600, can clock to 3.85 but 3.6 is good, run watercooling and 2x ATI 2900XT in crossfire & watercooled, raid harddrives, above mentioned 850w power, 4gb ram with heatsinks, and a X38 mobo, + big mofo case lol. gaming only. oh and sau :(

Link to comment
https://www.sau.com.au/forums/topic/221918-gaming-pc/#findComment-3911249
Share on other sites

SADDDDDDDD SO SADDDDDDDDD^^^^^.... im a geek but i would never waste that much money..... if it was your car... well yeah definatly..... but at least you could show it of.... all you end up wtih is a computer to make the sniffling grease ball geeks want to sexually satify you for a touch of your keyboard...... sad but as close to true as you can get.

Link to comment
https://www.sau.com.au/forums/topic/221918-gaming-pc/#findComment-3911300
Share on other sites

whatever-he got stuck up me so, yeah, whatever. could have said worse Im sure

sorry, pain tablets :D

anyway, for what you had listed, for $50 more you can go a fair bit better (ie next model up on the stuff in your list)

good luck with it mate

let us know how it turns out

Link to comment
https://www.sau.com.au/forums/topic/221918-gaming-pc/#findComment-3911430
Share on other sites

Not bad, but for a similar amount of $ you can build one with a Intel C2D which is faster overall. & they can be OCed easily while the AMD are pretty much @ their max frequency already.

Prices were taken from MSY

Intel C2D E8400 ~$220

Gigabyte P35 DS3P ~$155

2Gb kit 1066mhz Ram ~$75

512mb 8800GTS ~$325

All up $775.

Also do you need new hard drives? & How big is your LCD? For a system like that, make sure you have at least a GOOD quality 500w PSU (with a amp rating of over 20Amps on the 12V rail).

Also you might want to check out the PC building section on http://whirlpool.net.au/ for more info.

Edited by Mayuri Krab
Link to comment
https://www.sau.com.au/forums/topic/221918-gaming-pc/#findComment-3911454
Share on other sites

You should be fine as long as you know what you are getting, & buy from local salers' (in AU) with good rep.

Having said that, I have seen people sells all kinds of dodge crap there.

Like a Quad Core E6550, that like saying I'm selling an original factory N/A GT-R.

Link to comment
https://www.sau.com.au/forums/topic/221918-gaming-pc/#findComment-3912172
Share on other sites

sorry to hijack the thread but.....

looking at upgrading some computer parts for a mate of mine

he's got MS so he is in a wheelchair the whole time, so he doesnt play like full on games

he use's his new Samsung 42" Plasma as the screen

he already has 1Gb ram, and a 60gb hard drive

he needs a new vid card to have true widescreen on the tv and as a consequence a new mobo and cpu (as the mobo is old and only has AGP)

so this is what ive come up with - cheap, but will do the job:

Pentium Dual Core E2180 2.0GHz about $78

Asus P5GC-MX/1333 about $55

XFX NVidia 8400GS 256Mb about $40

that should do it alright yeah???

Link to comment
https://www.sau.com.au/forums/topic/221918-gaming-pc/#findComment-3915780
Share on other sites

if you are getting a new mobo, does the existing ram fit it? if the old mobo was AGP and the ram fit that just check to ensure the ram is the same.

Nice and cheap setup, you may also want to look at upgrading the 60GB hard disk in the future as a lot of software is now taking up considerably more HDD space

Link to comment
https://www.sau.com.au/forums/topic/221918-gaming-pc/#findComment-3919634
Share on other sites

+1 to what 25GTT said.

His probably gonna have to look at upgrading his ram aswell, pretty sure most of the motherboards that is AGP is also DDR (unless you got one of those Asrock hybrid boards that has like both DDR & DDR2 slots), while all current mobos now uses DDR 2 (or DDR3)

Link to comment
https://www.sau.com.au/forums/topic/221918-gaming-pc/#findComment-3920291
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm looking for a direct bolt on turbo upgrade for my 93 R33 GTST.  Anyone have experience with this Greddy T620Z turbo upgrade? I'd like to be able to run about 300hp to the rear wheels without putting too much strain on the turbo. I do daily drive the car.  Pretty stock car with basic bolt ons (exhaust outlet, down pipe, high flow cat and catback exhaust along with intake and FMIC).  I'l probably have a Haltech plug n play on the car before installing the turbo. https://www.greddy.com/products/turbo-upgrade-ecr33-er34-t620z-rb25-11520057   Also, any thought on this much boost on a 30 year old motor with 250,000KMs?  Engine feels/sounds strong for what it's worth.   Thanks you in advance!
    • Hey all, I'm working on a project car and I believe I made some mistakes. I'm looking to remove the clear coat from my car on most panels (except for panels where the paint has blistered, I will sand this), but wanted to know if these steps are correct?   1) Get a red scuff pad (abrasive one) instead of sand paper to remove the shine from the surface 2) get 400 grit sand paper and go over the entire car with a random orbital sander so the surface is smooth and the primer can grab onto something 3) On the blistered paint, go over it with around 120 grit sand paper, go to 240 to smooth out the scratches, then finish on 400 grit. Anything to add in here or any feedback?
    • Agreed, another vote for the Haltech CAN wideband.  No voltage offset errors is a beautiful thing.
    • Just get a Haltech CAN wideband, no need to wire any delay circuits, or relay, etc. Since I've moved to a Haltech CANbus wideband, I have not replaced a single sensor for over 5 years (if not longer, can't remember when moved to Haltach).
×
×
  • Create New...