Jump to content
SAU Community

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

has this car actually run a 9 second pass yet or is he just claiming it because of the power it makes????

ive never seen or heard of this car running other then on a dyno

ohh n im not tryin to bag his car out or anything like that im just curious

Edited by UWISSH!
has this car actually run a 9 second pass yet or is he just claiming it because of the power it makes????

ive never seen or heard of this car running other then on a dyno

ohh n im not tryin to bag his car out or anything like that im just curious

no...went to the track and ran 12.4 and 12.2 and then finally ran a respectable time of 10.6

Im still the only RH9 car Croydon racing has ever produced (well i built the car, and they did the engine and tuning)

Id really like to have a drive :D

it runs a hollinger seqential and ran slicks to achieve the 10.6, so even if it did run a 9 it still would not be classified RH9 as you have to run on radials.

I prefer to run the numbers before i even entertain the thought of talking up the times...but to each their own i suppose.

Edited by DiRTgarage
would like to see some specs and pic on it...

ill try and list what i know

N1 block

JUN 2.7ltr stroker crank

JUN conrods

JUN pistons

JUN oil pump

JUN 288 deg 11.35mm lift camshafts

JUN titanium retainers

JUN valve springs

JUN and ARP engine bolts (mains head and cam cap studs)

JUN radiator and header tank system

ACL race seies engine bearings

Race ported head

Nitto 1mm oversize valves

Nitto valve guides

Preformance metalcraft 9 ltr sump

TRUST 1.5mm DRAG head gasket

TRUST T88-38GK

TRUST manifold

TRUST external gate

TRUST B-pipe

TRUST 4 inch race exhaust

TRUST 160mm DRAG intercooler

OS Giken harmonic balancer

OS Giken quad plate clutch

OS Giken front and rear diffs

Hollinger sequential 6 speed gearbox

MoTeC M800 ecu

MoTeC CDI

Blitz ID-III boost controller

NOS Nitrous system (unknown quantity of gas used)

Performance metalcraft catch can system

thats just off the top of my head...ill add anything else that comes to mind.

its basically the same long engine as ours without the 2.7ltr crank (ours is STD stroke)

Edited by DiRTgarage

didnt it have twin 3040 turbs on it when it did 1000+hp at the treads???

Funny as hell, i have the same internal mods except it is a trust 2.7 kit and 280 cams in/ex with tilton triple and cusco diffs oh and 3037s twins...

havent seen the car for a while its gone in to hiding...

thought he tried to sell it, funnily enough my 34R is MNPII as well, and no i dont want to be the same... hahhaha

Edited by Dr R
no...went to the track and ran 12.4 and 12.2 and then finally ran a respectable time of 10.6

Im still the only RH9 car Croydon racing has ever produced (well i built the car, and they did the engine and tuning)

Id really like to have a drive :D

it runs a hollinger seqential and ran slicks to achieve the 10.6, so even if it did run a 9 it still would not be classified RH9 as you have to run on radials.

I prefer to run the numbers before i even entertain the thought of talking up the times...but to each their own i suppose.

yeh i didnt think that it had run the time, just goes to show that just because you have the power doesnt mean that you will run fast times

what was the story with the runs??? couldnt get the power down? bad launches? bad driver?

I also thought it had twin 3540's and an Apexi twin entry 150mm cooler.

The car definitely has all the gear to run the times very easily...it's just a matter of getting it down the track. At Compak Attak it was the driver's first attempt at racing the car and it was done (erroneously) using full slicks. A 10.6 with 145+MPH TS means that the car has the potential to run well into the 9's.

didnt it have twin 3040 turbs on it when it did 1000+hp at the treads???

yeah...it then made 1100hp with the T88-38GK

it may have been John's first time at the track with THIS car...but he's got more runs under his belt than most (previously ran a R32 GTR into the mid 10's as well)

Edited by DiRTgarage
i see the massive brembos have been ditched, possibly to accomodate a smaller wheel for the track?

that photo is over 2 years old...Dario's ute is in the background and its been back on the road for over 18 months

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Absolutely this. Yes, except not vacuum hose. Something oil/fuel safe is a better idea.
    • Like a Stagea, but not as cool! Hope you have enough garage space for this, or is something going to leave to make way for it?
    • The new project has arrived. I have wanted one of these for such a long time, well before that meathead Clarkson drove one in Africa. I really wanted an E34 but I have some medical issues that mean I *really* can't bump my head and the lack of airbags in the E34 made it just too big of a risk.  I don't know why I've always liked these older touring BMW's to be honest, but man I love this car. She's been pretty well maintained for her 243k's with what appears to be only a single oil leak at the oil filter housing gasket. It has a bunch of updates including later model bumper and headlights, 7 series billion-way adjustable seats and it came with a few spares and another set of wheels with legal tyres. I got a unregistered car permit from the RTA and drove it back from Canberra on Saturday.                   First cab off the rank is cleaning it up for blue slip. I dont know how picky they'll be but I figured I'd clean the headlights, fix the oil filter housing gasket, replace the speed sensors (throwing errors) and swap the OE wheels (the M Sport wheels have a big chunk out of one of the tyres.) I also need to replace all 6 gas struts - 2 for bonnet, 2 for hatch and 2 for hatch glass. The car tries to eat me whenever i open any of these. My plan for this car; Ultimately, this is a budget car. I can't afford to throw lots at it and its because I have another car that I got this, if something breaks its no big deal. I will just maintain and repair it really. But eventually I want to do a manual conversion. It actually looks pretty straight forward for E39's and the trickiest part will be sourcing the parts.  I do need to replace some suspension arms or bushes because wow, she's a floaty old girl. She's also fantastically slow. Like really, really slow. When pulling back out on to the freeway on Sat after a quick pull over I needed to wait until no cars were visible before going.  Oh, and the guy I bought it from had a gorgeous R31 GTS-X in the garage. 
    • Do you have a picture? I assume it is a breather for gearbox oil as it expands, it should have a vacuum line run nice and high in the engine bay (R32 GTR has it on a top bellhousing bolt)
    • Hi all, I am putting an r33 gtst gearbox into a VL and have noticed what looks like a vacuum barb on the box (on top in the middle). Suspecting that it's a vacuum line but I'd like to double check, if someone could confirm the function of that would be great. Cheers in advance.
×
×
  • Create New...