Jump to content
SAU Community

Recommended Posts

Hi just a quick question, may have been covered already if so my bad.

I have a surge tank and bosch 044 fuel pump which im putting in my car in the next couple of weeks.

No i keep hearing from my mates dont do it cause the car will smell of fuel and the pump is really noisey.

Is this true??? I plan on running teflon lines cause they contain the smell. But how noisey is the pump??? can you barely hear it or would i be better mounting it under my car with customer surge tank setup???

Any help would be graet cheers.

Link to comment
https://www.sau.com.au/forums/topic/222481-surge-tank-and-pump-question/
Share on other sites

Teflon is sposed to not weep, though Ive heard examples of the smell being present.

If you 100% want no smell, hard line it in the boot, or mount under car.

If noise is unacceptable, the usual CNC f.pump bracket you see around wont cut it IMO. You'll need a way of really isolating vibration. Iv seen a R32 with the f.pump bracket mounted to to the surge tank, with the s.tank rubber mounted to the chassis.; was pretty quiet.

Teflon is sposed to not weep, though Ive heard examples of the smell being present.

If you 100% want no smell, hard line it in the boot, or mount under car.

If noise is unacceptable, the usual CNC f.pump bracket you see around wont cut it IMO. You'll need a way of really isolating vibration. Iv seen a R32 with the f.pump bracket mounted to to the surge tank, with the s.tank rubber mounted to the chassis.; was pretty quiet.

yeah the bracket i have for the pump has a rubber surround so that should keep it quieter. will probabbly mount the surge tank to some rubber before mounting it to the chasis also.

What surge tank are you using?

just the usualk kind the ones that look like a canister, if i had a cpu at home i'd post up a pic.

044's are kinda like an angry bee :) I used a rubber lined mount with bits of rubber between the mount and the surface it's mounted too and some extra sound deadning on the rear parcel shelf under the trim and behind the seat cushions. You can hear the pump when the cars not moving at idle but when your driving you can't, road/engine noise drowns it out. As for the lines, I used all teflon ones in the boot and no smell what so ever. Bit of a pain in the ass though as the teflon line fittings are expensive and the lines don't bend as much as rubber ones.

this is my old surge tank setup

f01.jpg

i ended up removing it because of the fuel smell and the noise realli started to piss me of

this is my new surge tank setup

IMAGE_074.jpg

the surge tank is made by sard it runs the external fuel pumps are mounted inside the surge tank so it cuts out alot of the noise caused from the pumps

i also went with solid fuel lines to stop the fuel smell

lol @ angry bee, thats a good way to put it.

Mine is semi-audible... but i wouldnt call it excessive at all. With stereo on a normal level (not deafening) i cant hear the pump.

Fuel smell - i have that... BUT i have the usual fuel lines and its really not that bad i reckon...

You can buy better quality ones that dont weep, or teflon.

I cant remember the brand of fuel line, but PM Dr.Drift, Sam had them put them into a car and showed me ages ago, no smell :)

I'll grab a pic of my setup, its pretty nice i reckon... gimme a few days though as the car isnt @ home at the moment

044's are kinda like an angry bee :) I used a rubber lined mount with bits of rubber between the mount and the surface it's mounted too and some extra sound deadning on the rear parcel shelf under the trim and behind the seat cushions. You can hear the pump when the cars not moving at idle but when your driving you can't, road/engine noise drowns it out. As for the lines, I used all teflon ones in the boot and no smell what so ever. Bit of a pain in the ass though as the teflon line fittings are expensive and the lines don't bend as much as rubber ones.

yeah i heard they cost a bit but they're worth it. hmmm will have to see how i go

the surge tank is made by sard it runs the external fuel pumps are mounted inside the surge tank so it cuts out alot of the noise caused from the pumps

i also went with solid fuel lines to stop the fuel smell

where did ya get it from and how much did it cost ya cause i may head down this road. PM me if need be

lol @ angry bee, thats a good way to put it.

Mine is semi-audible... but i wouldnt call it excessive at all. With stereo on a normal level (not deafening) i cant hear the pump.

Fuel smell - i have that... BUT i have the usual fuel lines and its really not that bad i reckon...

You can buy better quality ones that dont weep, or teflon.

I cant remember the brand of fuel line, but PM Dr.Drift, Sam had them put them into a car and showed me ages ago, no smell :)

I'll grab a pic of my setup, its pretty nice i reckon... gimme a few days though as the car isnt @ home at the moment

yeah that would be cool bro cheers

I have a surge tank and bosch 044 fuel pump which im putting in my car in the next couple of weeks.

Why?

For what reason are you doing it?

Planning on some track work?

Concerned about fuel surge?

Have you thought about mounting the 044 in tank and not letting the tank get below 1/4 full?

Is that simple requirement worth the extra complexity and hassle from a boot mounted fuel refinery?

Or are you doing it just for the bragging rights?

Cheers

Gary

Why?

For what reason are you doing it?

Planning on some track work?

Concerned about fuel surge?

Have you thought about mounting the 044 in tank and not letting the tank get below 1/4 full?

Is that simple requirement worth the extra complexity and hassle from a boot mounted fuel refinery?

Or are you doing it just for the bragging rights?

Cheers

Gary

As above

044 intank FTW!

mounted properly intank its whisper quiet and still pumps fine with 5L left in the tank.

happily feed 350 rwkws.

for a fraction of the cost.

Why?

For what reason are you doing it?

Planning on some track work?

Concerned about fuel surge?

Or are you doing it just for the bragging rights?

Yeah thats why i bought it so i can brag on the net about how cool my surge tank setup is.... :(

The car will be a weekend track car.

As above

044 intank FTW!

mounted properly intank its whisper quiet and still pumps fine with 5L left in the tank.

happily feed 350 rwkws.

for a fraction of the cost.

I bought the set up brand new for less than an intenal pump. Besides dont wanna risk fuel starvation on my engine, would you???

I have a tank in my boot with braided lines and it stinks out the car, but all you have to do is open the windows and 5 mins later its gone :(

Mine is all rubber mounted but its still pretty noisy. On idle you can hear it, but cruising not really.

Like Ash said have the music on to overcome the buzzing :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...