Jump to content
SAU Community

Recommended Posts

Hello there i have a 1990 GTS4

i was wondering what tyre size set up i should have since the attessa the rolling diameter needs to be the same? sorry

yes i tried the search feature but i think its not working for me

do you guys with R32 GTR and GTS4 mind sharing with me your tyre setup for track, streets and twisties please??

originally i was thinking 265 rear and 235 front?? on 18" or am i getting it all wrong??

cheers,

Link to comment
https://www.sau.com.au/forums/topic/222561-r32-gtr-or-gts4/
Share on other sites

Yes, the ROLLING DIAMETER needs to be the same on ALL FOUR CORNERS. The simplest way to achieve this is to run the SAME SIZE TYRES on the SAME SIZE RIMS on all 4 corners. (Also simplifies evening out tyre wear by swapping F<->R).

I'm going to recommend switching to 17s, because you get a bit more sidewall flex available (you should note F1s run quite a tall profile tyre , especially on the rear)

Link to comment
https://www.sau.com.au/forums/topic/222561-r32-gtr-or-gts4/#findComment-3922858
Share on other sites

Can I just ask?

From what I read, you already have the rims.

What size/width/offset are they?

Basically, yes.. you need the same rolling diameter all the way around.

Im running 205/45/16 on an 8 inch rim.

Stretch means less sidewall flex..

sidewall flex is VERY scary through the twisties..

Also, caster (spelling?).. try increasing caster so as the steering wheel straightens up easier during oversteer.

The rest is all up to you.. It depends how you drive. See if you over/under steer and then adjust strut/sway bars and height/damper rates according to what your experiencing, what you like and what you dont like..

It takes a while to get that sweet spot but once you got it.. gosh its awesome!

Link to comment
https://www.sau.com.au/forums/topic/222561-r32-gtr-or-gts4/#findComment-3929835
Share on other sites

You can run 235/40/18 on the fronts and 265/35/18 on the rears to get a very close rolling diameter front and rear. Thats what I use on my street rims.

Or else you can just run something like 265/35/18 all round if it'll fit your guards, and if your rim is wide enough.

Link to comment
https://www.sau.com.au/forums/topic/222561-r32-gtr-or-gts4/#findComment-3929858
Share on other sites

my rear guards been flared out so i can fit the 265/35 at the back..but i was gonna go 235 for a move linear price range on tyres an slicks.. on a 17" 8" or 9" wide?

like i can afford the 18" tyres no problem but some times its abit difficult trying to find a place that always stocks the 18" and also since i havnt flared out my front guards i dont really want to want to go to the hassle of playin with different sizes

even though Yawn your tyre set up for street sounds pretty decent.

but since 17" are fairly common i might move into that area cause later i want to move into track since i used to do it on my motorbike..

thast why im asking all these noobish questions.

but what offset would be good for a GTS or a GTR. also should i be using a 8 or 9 or even possibly a 7.5" wide rim?

cheers

Link to comment
https://www.sau.com.au/forums/topic/222561-r32-gtr-or-gts4/#findComment-3931231
Share on other sites

Smaller width tyres on the front is not good for handling balance in a nose heavy 4wd. Your car has over 60% of its weight on the front tyres and around 40% on the rears. That's why they understeer. Plus it does close to 80% of its braking on the front tyres. Smaller front tyres simply increase the understeer and decrease the braking potential. So why in the hell would you want to have less grip on the front than the rear?

Cheers

Gary

Link to comment
https://www.sau.com.au/forums/topic/222561-r32-gtr-or-gts4/#findComment-3935038
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've always approached this as, price is comparable between low temp and high temp fluid. Just put in the high temp fluid. I've not going to lose any sleep thinking about could I have saved $20 on brake fluid that is going to live in the car over the next 2 to 3 years. 
    • Nah, the creases were pretty large, and the sheet metal is pretty thin and hard to work out, time alone is in the hours to fix, and would probably have more bog than I would be happy with In other, more happy news, I gave MX5 Mania a call and they have a few clean boots available for $400 a peice, I've contacted Fineline and given them their contact details, I'm a idiot for not thinking of them sooner
    • That really depends on how hot the brakes get and how much of any heat is transferred into the fluid. That really makes it at least a vehicle specific question, and more than like a specific vehicle specific question, depending on what brakes (ie stock, bigger rotors, different calipers) or even what pads are on it. And then there's the question of cooling air. Is there plenty stock? Is there no special cooling arrangements stock? Has some/more been added? In other words, I think you have to do the experiment to obtain the data. And if you;re worried - tie on some ducting?
    • In all the track days I've done over the past few months I've only had 1 issue with braking and thats with my current EBC pads (can't remember the colour, but they're not a track pad). I don't *think* I have had issues with brake fluid getting too hot, my understanding is that when that happens you will have quite noticeable brake loss - which I haven't had.  I'm using just regular ol' Penrite Super DOT4 fluid. I use this fluid in everything and my cars always seem to stop so I see no reason to change, except ... for the 335i. I need to do a fluid flush and was thinking about my fluid of choice and wondering if I should consider using something more high temp? Its not a super fast car by any standards but I'd hate to do a flush and then find myself with no brakes when I get. to Wakefield.  I guess, my question can be summed up as "How fast do you need to be driving to need higher temp brake fluid?"  I remember high temp fluid was considered a must have back in the day when I had my GTR. 
    • For anyone that comes here looking for answers on what can go wrong with gts-4 to rb25detneo swap. The Gloria's awd sump is different and does not fit. The rb25neo from stagea are exactly the same sump bolt pattern and axel alignment. Castings numbers are different on Gloria's blocks and oilpans if they need to be identified.
×
×
  • Create New...