Jump to content
SAU Community

Factory Rb20det 5 Speed Gearbox Cefiro

adrnln

By adrnln,
in Four Door Family & Wagoneers

 Share

Recommended Posts

adrnln Proficient

adrnln

Posted
Posted

HI all as topics

Are the FACTORY 5 speed RB20DET gearbox's, fork, pivot ball, the same as all other RB20DET R32 gearbox's

I have a 5 speed manual Factory build Cefiro and have blown up my gearbox and have just ordered and received a RB20DET from a R32 after many many issues (clutch and other ) I have put the gearbox in and found that I don't have the full reach of my clutch and is bearly driveable ( grindes nearly every gear)

Clutch master and slave are brand new but still unable to get any pressure to my clutch and seems I am unable to fully disengage the clutch hence the grinding.

I have asked around and people seem to think that either the fork, throw bearing, bell housing or all the above are different from FACTORY 5 speed RB20DET Cefiro to the RB20DET R32 Skyline.

PLEASE help

Billy

adrnln Proficient

adrnln

Posted
  • Author
Posted

Have had a made look into it for me and have now found the real problem. No sprigot bush!! BUT in saying this the last box I took out didnt have one aswell but still worked fine.

Having a auto engine put in after I blew the previous one up sprigot bush was never put in but did not seem to effect the driving of the gearbox/engine??

Go figure

Well getting one during the week and will let you know how it went

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Lithium
      R32 GTS-t RB30 sedan

      By Lithium · Posted

      To be fair passengers who aren't silly and have been in proper fast cars have often been pretty impressed once you hit 4th gear   
    • Lithium
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By Lithium · Posted

      Outstanding!
    • BaronOBeefdip
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By BaronOBeefdip · Posted

      I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • TurboTapin
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By TurboTapin · Posted

      No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • Murray_Calavera
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By Murray_Calavera · Posted

      I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
×
×
  • Create New...