Jump to content
SAU Community

Can I Put Rb26 Into Gts4 Shell?

23gtr32
 Share

Recommended Posts

Beer Baron Grand Master

Beer Baron

Posted
Posted

gts4 is closer to 4.4 (4.375:1 to be precise) you will need to install your GTR rear diff too. or you can keep your rear GTS4 diff (i wouldn't, they are rubbish) and take the crown wheel and pinion out of the GTS4 engine and put that into your 26. or a third option is to take the crown wheel and pinion off both the front and rear GTS4 diffs and isntall the rear one onto your GTR diff and the front into your 26. then you have the GTS4 ratios but with the GTR rear diff (front diffs are the same apart from the ratio so no real change there).

23gtr32 Enthusiast

23gtr32

Posted
  • Author
Posted
gts4 is closer to 4.4 (4.375:1 to be precise) you will need to install your GTR rear diff too. or you can keep your rear GTS4 diff (i wouldn't, they are rubbish) and take the crown wheel and pinion out of the GTS4 engine and put that into your 26. or a third option is to take the crown wheel and pinion off both the front and rear GTS4 diffs and isntall the rear one onto your GTR diff and the front into your 26. then you have the GTS4 ratios but with the GTR rear diff (front diffs are the same apart from the ratio so no real change there).

thx mate that's pretty pro... i kept all the diffs and drive shafts...... hope i can get gts4 shell

nizmonut Community Regular

nizmonut

Posted
Posted (edited)
IS the GTS4 rear diff ratio the same as the GTR front diff ratio?

Thought I may throuw it out there..

gts4 is 4.3 diff ratio isnt it? and gtr is 4.11 from memory, thats what i got told anyway :P
gts4 is closer to 4.4 (4.375:1 to be precise) you will need to install your GTR rear diff too. or you can keep your rear GTS4 diff (i wouldn't, they are rubbish) and take the crown wheel and pinion out of the GTS4 engine and put that into your 26. or a third option is to take the crown wheel and pinion off both the front and rear GTS4 diffs and isntall the rear one onto your GTR diff and the front into your 26. then you have the GTS4 ratios but with the GTR rear diff (front diffs are the same apart from the ratio so no real change there).

how bout just stickin the gtr front centre and rear diff, housings and all in the gts4???

Edited by nizmonut

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      So we have most the interior back in, and for the first time with one OEM speaker hooked up. The 31 is running, driving and now tunes!!! Hahaha yet another step for the sub that sat 10m under for two weeks!!! unbelievable really 👌 lots of love work and not giving up on her. Seen so many youngsters part way less, and in way better condition. I’m stubborn, thinking another problem is just a hurdle to overcome, One at a time. IMG_9277.mov
    • TurboTapin
      CD009 RB Conversion

      By TurboTapin · Posted

      That is correct. I'm using a modified ABS ring and a ZF speed sensor on my rear diff for speed input. I'm running a Haltech ecu. 
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Been busy with the newborn. We originally thought we were going to go for a third, but we're good with two lol. He's starting to actually sleep now so I've had some energy to work on the car. It's been parked away in the garage since late November due to winter.  I went ahead and redid all my head oil drains. I originally had my front and rear head drain going into the same pipe but have since split them up. I also added an Ethanol content sensor to get ready to run E85 this summer. Tossed it on my return line. Sensor sits nicely under my intake manifold.    I also have a lot of parts that came in for my rear end. I'll be swapping over to a 3.3 final drive and doing the GK teck anti squat mod. While the rear subframe is off, I'll also change every bushing. We're planning on buying another house soon with the condition that I get at a minimum a 2 door garage, so I'll wait to have more room for this. Now onto the strange things that recently happened... After changing the lower rad hose (It had been sitting in my cabinet for well over a year and was the last hose I had to replace), I let the car idle in the garage to bleed my coolant. After running for a few minutes, it started missing. Got much worst within a minute or two and then stalled and would not restart. My crank sensor decided to crap itself. No damage, no explanation, just died. I went ahead and replaced it with another ZF sensor but the heavier duty stainless model with a shield. Tossed that in and started right up. Has anyone else seen this? I hate when things fail without cause. Luckily this was a blessing in disguise... This lead me to recheck my timing. It seems I may have had a beer or two the last time I had set my TDC angle as I was off exactly 5 degrees... I miscounted a line haha. I was running 5 degrees less then commanded. It's a little embarrassing but helps explain why my dyno operator seemed to think I should be making more then 478rwkws.        
    • hypergear
      Hypergear Turbochargers and High flow Services Development thread

      By hypergear · Posted

      Sharing results from recent Liberty Walk R35 GTR, since they are still considered as somesort of a V36 Skyline. We do them turbos too. This are high flowed SS-1 models with ball bearing conversion done.  Car have managed to pull 485awkws @ 20Psi so far pushing limitations of factory built engine. The build list for R35 GTR enthusiasts as follow : HyperGear high flowed stock turbos in SS1 (G25-660 specs) Custom titanium intake pipes. Vspec performance titanium front pipes. Vspec performance 4" titanium exhaust. Upgrade fuel pumps. 1200cc injectors. Ignition coilpacks Hks intake plenum. Hks intercooler piping. Greddy intercooler. Greddy bovs. Top-secret coolant reservoir. Emtron ecu. Straight E85. Built gear box.  
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      Nah no bearings, just slip fit.  Would be a reasonably challenging but not impossible job to modify it to run bearings but I'm hoping that's not necessary as I may have well built one myself if I end up spending hours modifying it!
×
×
  • Create New...