Jump to content
SAU Community

Stagea Miss

sturb25
 Share

Recommended Posts

gebba54 Collaborator

gebba54

Posted
Posted
I'm wary of spending money on coilpacks as usually you end up replacing perfectly functional items, only to find further down the track that it was the loom, CAS or similar that was the real problem.

Yeah, fair call.

If it is coilpacks...WTF is up with their quality in late model skylines? I have 20 year old ones in my HR31 which are still in A1 condition, but seems R32/33/Stag items crap out inside a decade.

I dunno, I'm new to the whole RB engine thing. I didn't know anything about coil packs before the Stagea. Last time I worked on an engine, it had one coil, leads and plugs that didn't require dismantling half the car to get to. :(

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted
I'm wary of spending money on coilpacks as usually you end up replacing perfectly functional items, only to find further down the track that it was the loom, CAS or similar that was the real problem.

If it is coilpacks...WTF is up with their quality in late model skylines? I have 20 year old ones in my HR31 which are still in A1 condition, but seems R32/33/Stag items crap out inside a decade.

Why do coilpacks break down? Dunno but but over here agressive steam cleaning by MAF at the border probably doesn't help. Also stuffed plugs putting extra demands on them. If you do a search on this site there are 1001 opinions and horror stories. There seems to be no reliable way to test them. The multimeter doesn't always pick up the problem. A visual inspection for cracks, tracking or burn marks is worthwhile followed by a good clean and various forms of insulation have been suggested. Taking the cover off at night or in a dark garage and looking for arcing seems a good idea. You could try these cheap fixes before moving on to new coilpacks or looking at the other possible causes of missing

floody Experienced

floody

Posted
Posted
heat is the natural enemy of the coil pack as far as i know. RBxxDET = lots of heat nestled in betweem both cams with a nice cover to seal the heat in.

time does the rest.

Time does the rest? why are R33 ones etc failing in 10 years or so, when my HR31 items, being nestled in a hot little RB20DET for 2 decades are powering on though? Is it more an RB25 problem?

Sydneykid Grand Master

Sydneykid

Posted
Posted

Later model (R33 S1.5 and Stagea S1 onwards) have the ignitor built into the coil pack, rather than a stand alone ignitor. Not sure if that's the issue, but it is a difference from the earlier models. That said I have been working on R32/33/34's since 1999 and I haven't found one failed coil pack, maybe I'm just lucky.

Cheers

Gary

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Ozdavroz
      Starting again

      By Ozdavroz · Posted

      Quick update, finally got an hour or two on a weekend where there wasn't shit weather, no sick kids, people visiting our house or had to work. Visited me old folks and the skyline...dropped  $10 of 98 in the tank and a brand new SCA shitter battery in. Cranked over a bunch of times but didn't fire up....pretty sure it's not getting any fuel. Gonna try some of the stuff suggested above, next time I make it over there. 
    • PranK
      Rusty roof repair

      By PranK · Posted

      @GTSBoyas luck would have it and it's legit the only part of this story that goes my way, I already had the liner out to retrim! So much lucky!
    • Dose Pipe Sutututu
      New r33 owner

      By Dose Pipe Sutututu · Posted

      Drill out the subframe bushes, replace them, same with the diff bushes.
    • GTSBoy
      Rusty roof repair

      By GTSBoy · Posted

      Sane enough. Remove the roof liner, because the acid will go everywhere.
    • PranK
      Rusty roof repair

      By PranK · Posted

      Thanks guys, I really appreciate the help and experienced opinions.  I have spent a lot of my life working on boats so I'm pretty good with fibreglass. I'll take everybody's advice in here;  I'll cut a little more of the 2nd layer away as it's a bit crunchy rust and also it's sitting high now. Then I'll wire brush it all a bit to get off anything loose, then I'll soak the bejesus out of it all in rust converter. I'll make sure to get a little hose piece and feed it into all the holes and gaps between the roof layers. Then I'll fibreglass up the holes.  Then I'll get a pallet of filler and mix it with 3 buckets of hardener and hope that is enough to build up the roof corner.  Does that sound sane? Is one type of filler better than others for this?
×
×
  • Create New...