Jump to content
SAU Community

Recommended Posts

What a f**king retard. But you see GT-R badges on anything and everything these days. I almost thought about hitting a guy who had GT-R badges and the GT-R rear wing on his NA R33.

Yes here is another prime example sourced from a carsales ad Infinity badge on the front grill Skyline on the back top it all off the owner added a GTR badge ? i think the owner is confused with the car's identity.

post-15840-1213084033_thumb.jpg

post-15840-1213084091_thumb.jpg

Edited by MFC05
damn these new Nissan's are dead set ugleh.

Has anyone thought of wasting heaps of money an buying a micra and transplanting the engine with that of a Sr20, RB26, VQ35??? LOL....that'd be madest car around! Nismo should take on the challenge :geek: *Introducing the new Nismo Micra S -Tune* :ermm:

To see the faces at the lights when you spool your turbo's for the green would be priceless! If only the engine bay could be a lil bigger *takes out project book and thinks*

Yes here is another prime example sourced from a carsales ad Infinity badge on the front grill Skyline on the back top it all off the owner added a GTR badge ? i think the owner is confused with the car's identity.

Unless its Top Secret's AWD V8 V35 "GT-R", that's just retarded.

I dig the bodykit and rims, although I don't think the Nismo stripes suit a "grand tourer", but that GT-R badge and the hideous reversing camera ruin the whole car for me.

Has anyone thought of wasting heaps of money an buying a micra and transplanting the engine with that of a Sr20, RB26, VQ35???

Nissan UK has.

They used to have a Micra with a mid mounted SR20DET, and recently they made one with a VQ35DE.

What a f**king retard. But you see GT-R badges on anything and everything these days. I almost thought about hitting a guy who had GT-R badges and the GT-R rear wing on his NA R33.

Yes here is another prime example sourced from a carsales ad Infinity badge on the front grill Skyline on the back top it all off the owner added a GTR badge ? i think the owner is confused with the car's identity.

I think thats the twin turbo one in Sydney. Haven't seen the add for a while but it's around $90k and i think it says something like "as close as you can get to GTR beofre they'e released'

Back on topic that Z looks really really bad

Nissan UK has.

They used to have a Micra with a mid mounted SR20DET, and recently they made one with a VQ35DE.

Was about to say aswell, sounded like a freakin monster too when he put his foot down

You're both right :blink:

soo a turbo vq must > everything by that logic :ninja:

I think thats the twin turbo one in Sydney.

Quite possible, but I'm not sure unless the photos are very new.

I spoke to Powerplay around 3-4 weeks ago, who've dealt with the owner of that beast V35 twin turbo, and when they last saw that car it was still running a stock front bar.

However, the wheels are definitely the same and it does look like an APS intercooler visible in the grille of that aftermarket front bar. The TT one also had that reversing camera.

rb20e > VQ38dett

VR38DETT> RB26DETT > VQ38DETT > RB25DET > SR20DET etc etc etc.... > than a bicycle > than using legs > being disabled > than being dead!

Also im not suprised about the nissan micra thing! thats why i asked.... now all thats left to see is the Nismo racing stripes painted on a wheelchair and im set for suprises....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
    • Hey everyone, This is my first post apart of the introduction. I tried searching a bit on the forum but couldn't really get a straight answer. I got the car to my mechanic as I felt it being weak. It seems that it was missing on two cylinders due to the injectors. I had all my injectors clean and the car runs much better. The mechanic also confirmed my suspicions that the cat is clogged and needs to be tackled asap. The cat rattles a bit and the hot exhaust warning frequently lights up when driving after getting the injectors clean. In my introduction I was asked about what modification I might be interested in and mentioned a cat delete. From what I was told, this is not really beneficial on the RB20DE and there are more cons than pros.  Could perhaps anyone give some suggestions on what the best course of action would be since the current cat is toast and needs to be removed/replaced anyway? I can also sometimes smell a strong smell of fuel, but I'm not sure if this is related.
    • Hope the cans went down well at least 
    • 255 can't go wrong with the price.
    • When I was replacing my pump due to being stranded in the wrong state, I went with the Deatschwerks 320lph kit. It is a direct plug in to the stock wires, harness, everything. It comes with a plug... but you can plug the OEM plug directly into this thing. https://justjap.com/products/deatschwerks-dw300-fuel-pump-nissan-s13-silvia-r32-r33-r34-skyline-c34-stagea?currency=AUD Downside: Won't actually flow that much on boost if you want to push it on E85, but it's comparable to the 040/255 etc. Little more actually.
×
×
  • Create New...