Jump to content
SAU Community

Recommended Posts

I have searched the entire forum before asking this, aswell as UK skyline forum.

My new nismo meter set won't read speed correctly ( ie shows im doing 120kph when im actually doing 50 kph etc ) and HICAS light stays on.

I have done the following so far to fix these problems :

1. Fit a brand new speedo cable.

2. Checked oil levels for HICAS

3. Changed over speed sensor as the back of dash for orig cluster that was working fine.

4. Checked Battery power level, which is a dry cell optima yellow top with plenty of juice left in it.

The nismo set is meant to be plug and play.... Don't or shouldn't need calibration or a addon gear reduction box etc.......

Also speed reads correctly via Apexi power FC hand controller LCD display .......

are there any skyline guru's out there that could possibly shed light on this situation.......... or offer a solution.

I won't take it to nissan for them to charge me countless hours for them to try and find the problem and come to the same point as me nor a exclusive over priced performance shop that I will shell out

$'s for them to try and find problem with no solution.

any help would be greatly appreciated.

Rob

Link to comment
https://www.sau.com.au/forums/topic/223754-anyone-know-a-fix-for-this/
Share on other sites

No speed means your HICAS mucks up fix speedo and all will be good.

Edit. opps sould have read the hole lot frist. When my speedo didnt work at all i had HICAS problems maybe yours is reading that the car is always moving so it has no idea whats happening.

what would cause that?

also can't be speed sensor becuase apexi power FC hand display ready correctly... which gets it information from the speed sensor right....

Also power steering is still 100%....

there must be one person out there with a solution..... seriously.

while i was searching for an answer to your problem it occuored to me that the magnets on the needle of the cluster still use 12 volts, regardless of whether it is a standard skyline cluster or not,

which means that a standard speedo drive would under drive the needle giving the incorrect speed, also hence why the hicus is having issues because the speed is saying one thing yet the sensors at each hub are giving conflicting information.

the reason i say this the early nismo gtr's had 260kph speedo's not 320kph like the later gtr's, mines a november 92 gtr and has 260 on the clock. i suspect the speedo cluster you have there is for the v spec model.

  nizmonut said:
while i was searching for an answer to your problem it occuored to me that the magnets on the needle of the cluster still use 12 volts, regardless of whether it is a standard skyline cluster or not,

which means that a standard speedo drive would under drive the needle giving the incorrect speed, also hence why the hicus is having issues because the speed is saying one thing yet the sensors at each hub are giving conflicting information.

the reason i say this the early nismo gtr's had 260kph speedo's not 320kph like the later gtr's, mines a november 92 gtr and has 260 on the clock. i suspect the speedo cluster you have there is for the v spec model.

the speed sensor at the dash is moved within the speedo itself and then sends electrical pules that hen allow the ecu to kow the speed, hence the fc handheld LCD is showing correct speed.

I checked with nissan dealer about the part number, which they said was for a 1990 r32 GTR......

aftermarket nismo speedos are pretty standard for GTRs and the like.

I already have a aftermarket 260km/h nismo black dash that works perfect on my R32 GTR.

any other suggestions....

There should be two speed sensors - one is part of the cluster the other is part of the gearbox...Find out which one your (working) Power FC is connected to (i.e. gearbox speed wire or dash speed wire) and then you will know which one is playing up.

  colossus said:
There should be two speed sensors - one is part of the cluster the other is part of the gearbox...Find out which one your (working) Power FC is connected to (i.e. gearbox speed wire or dash speed wire) and then you will know which one is playing up.

nah, 32's only have the one, at the cluster. they have a cable driven speedo.

  QWK32 said:
nah, 32's only have the one, at the cluster. they have a cable driven speedo.

Thats what I thought.

I'am just at that point of I don't know what to do. It works somtimes and I have replaced the cable.... and the apexi handset reads true... so the speed sensor is fine.

what else could cause this?

there must be someone in Australia with an idea.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...