Jump to content
SAU Community

Recommended Posts

I have searched the entire forum before asking this, aswell as UK skyline forum.

My new nismo meter set won't read speed correctly ( ie shows im doing 120kph when im actually doing 50 kph etc ) and HICAS light stays on.

I have done the following so far to fix these problems :

1. Fit a brand new speedo cable.

2. Checked oil levels for HICAS

3. Changed over speed sensor as the back of dash for orig cluster that was working fine.

4. Checked Battery power level, which is a dry cell optima yellow top with plenty of juice left in it.

The nismo set is meant to be plug and play.... Don't or shouldn't need calibration or a addon gear reduction box etc.......

Also speed reads correctly via Apexi power FC hand controller LCD display .......

are there any skyline guru's out there that could possibly shed light on this situation.......... or offer a solution.

I won't take it to nissan for them to charge me countless hours for them to try and find the problem and come to the same point as me nor a exclusive over priced performance shop that I will shell out

$'s for them to try and find problem with no solution.

any help would be greatly appreciated.

Rob

Link to comment
https://www.sau.com.au/forums/topic/223754-anyone-know-a-fix-for-this/
Share on other sites

No speed means your HICAS mucks up fix speedo and all will be good.

Edit. opps sould have read the hole lot frist. When my speedo didnt work at all i had HICAS problems maybe yours is reading that the car is always moving so it has no idea whats happening.

what would cause that?

also can't be speed sensor becuase apexi power FC hand display ready correctly... which gets it information from the speed sensor right....

Also power steering is still 100%....

there must be one person out there with a solution..... seriously.

while i was searching for an answer to your problem it occuored to me that the magnets on the needle of the cluster still use 12 volts, regardless of whether it is a standard skyline cluster or not,

which means that a standard speedo drive would under drive the needle giving the incorrect speed, also hence why the hicus is having issues because the speed is saying one thing yet the sensors at each hub are giving conflicting information.

the reason i say this the early nismo gtr's had 260kph speedo's not 320kph like the later gtr's, mines a november 92 gtr and has 260 on the clock. i suspect the speedo cluster you have there is for the v spec model.

while i was searching for an answer to your problem it occuored to me that the magnets on the needle of the cluster still use 12 volts, regardless of whether it is a standard skyline cluster or not,

which means that a standard speedo drive would under drive the needle giving the incorrect speed, also hence why the hicus is having issues because the speed is saying one thing yet the sensors at each hub are giving conflicting information.

the reason i say this the early nismo gtr's had 260kph speedo's not 320kph like the later gtr's, mines a november 92 gtr and has 260 on the clock. i suspect the speedo cluster you have there is for the v spec model.

the speed sensor at the dash is moved within the speedo itself and then sends electrical pules that hen allow the ecu to kow the speed, hence the fc handheld LCD is showing correct speed.

I checked with nissan dealer about the part number, which they said was for a 1990 r32 GTR......

aftermarket nismo speedos are pretty standard for GTRs and the like.

I already have a aftermarket 260km/h nismo black dash that works perfect on my R32 GTR.

any other suggestions....

There should be two speed sensors - one is part of the cluster the other is part of the gearbox...Find out which one your (working) Power FC is connected to (i.e. gearbox speed wire or dash speed wire) and then you will know which one is playing up.

There should be two speed sensors - one is part of the cluster the other is part of the gearbox...Find out which one your (working) Power FC is connected to (i.e. gearbox speed wire or dash speed wire) and then you will know which one is playing up.

nah, 32's only have the one, at the cluster. they have a cable driven speedo.

nah, 32's only have the one, at the cluster. they have a cable driven speedo.

Thats what I thought.

I'am just at that point of I don't know what to do. It works somtimes and I have replaced the cable.... and the apexi handset reads true... so the speed sensor is fine.

what else could cause this?

there must be someone in Australia with an idea.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • And at over $2 per litre I'm starting to consider setting up a corn mash still and converting over to alcohol and running mine on it !  Up side of that is it all doesn't have to go into the car ! Win win !
    • H2 (for cars) will never happen. It's not reasonable for any number of reasons. It's also not reasonable for almost all of the industrial uses that the fanbois say that it will be used for, again for a large number of reasons. There are some cases where it will be good. But, even those will be massively hampered by the economics. The only way that H2 can be economic is if we somehow manage to get from where we are to the other side of the economic-valley-of-death in which no-one can operate. You need there to be sufficient renewable generated electricity to be available so that it is effectively free. Once you are there, you can do whatever the hell you want and hang the efficiency. But until you get there, the ever diminishing value of electricity makes it harder and harder to encourage businesses to build the new generation capacity, and they will simply stop investing in generation projects. (I kinda think there needs to be just government money spent on building the required capacity in a non-commercial way, similar to how the first fossil fueled grids were built, as national-government owned utilities. And probably some nuclear in there to start. But this all should have started 10-15 years ago to avoid the chasm of death that we face right now). Synth fuels will be much more likely, but will only occur is there is at least some renewable H2 production, because you need H2 to do it. And you need stacks of free (or at least extraordinarily cheap) energy because assembling molecules back into fuels is exactly the opposite process to burning the fuel, and the reason we burn fuels is because there is so much energy squeezed into each molecule. So you're somewhat subject to the same economic valley of death problem as above anyway. That is unless people are willing to pay the current equivalent of $5 or $6 per litre of petrol-ish liquid fuels. Can you imagine it? The squealing at $2 now is bad enough.
    • This is so cool. Get a dashcam that records audio and hopefully you'll catch it.  Maybe there's a brand or some kind of markings on the back ? Are the pics hand drawn? I love it so much.
    • Hahaha yep, point(s) taken. I just like seeing different things and an EV in an R32 is pretty different. I'm not on the EV band wagon, I'm waiting for synthetic fuels or hydrogen personally. 
×
×
  • Create New...