Gates Rb30 Timing Belt Dont Work With Rb30/26 Conversion?

[felixy69]

I have a new gates timing belt for rb30 and it doesnt fit!! Yyy

My set up is rb30/26 what timing belt do I need ?? Rb30 belt different

Help me

thx

[TiTAN]

Due to the extra deck height of the RB30 Block you require a belt that is approximately 11 teeth longer (Providing you relocated one of the tensioners from the factory location to above the water pump if you didn't its a different belt again).

A total of around 152 teeth will be needed the Dayco part number for this setup is 94407.

[Fry_33]

You can also contact the Gates tech guy for automotive power transmission (belts etc). He gets quite a few questions about this and has a list of a few different belt options depending on how you've set it up.

[Dahtone Racing]

gates offer a belt for RB30DET using the sock tensioner location

[nizmonut]

the belt is 11 teeth too short, as above gates make a belt especially for the twin cam rb30 conversion, just go in and state you have a twin cam rb30, it should be on any autostores parts system.

http://www.skylinesaustralia.com/forums/lo...hp/t171465.html

use the link on this page

[rockabilly]

mine has a gates belt.. you need a mazda 323 1.7 td one it fits a treat..

[dano4127]

the belt is 11 teeth too short, as above gates make a belt especially for the twin cam rb30 conversion, just go in and state you have a twin cam rb30, it should be on any autostores parts system.

http://www.skylinesaustralia.com/forums/lo...hp/t171465.html

use the link on this page

Doing this in Canada will return a blank look...

WTF is twin cam RB30?

[nizmonut]

Doing this in Canada will return a blank look...

WTF is twin cam RB30?

i hope your not serious about your last question. lol

[KISIN]

i hope your not serious about your last question. lol

I think u misunderstood what he said

[r33_racer]

I doubt that many 15yr olds behind the counter at any autoparts store in canada would have any idea what an rb30 is haha...let alone what belt is required for the dohc conversion.

Definetely misunderstood the question!

[R31Nismoid]

Someone didnt read the RB30 Guide/sticky about timing belts