Jump to content
SAU Community

Recommended Posts

car looks good. shame about the damage but it is a drift car. and on a wet track there is always going to be a bit of damage!

best of luck for the next one. :D

  • 4 months later...
  • Replies 151
  • Created
  • Last Reply

Top Posters In This Topic

Long time since I last made a update, but there havent been any thing til report.

I fixed the trouble with the throttle cable, and it made a enormous difference... ;):blink:

I tried the car two weeks after the baad start on the "season" in Bergen, on a large track in Oslo (Capital of Norway).

And the car worked perfect!! :laugh::P exept for small things like bolts that got loose and not big enaugh main fuse... :blink:

I used the car the whole friday and saturday without problems, and the sunday started with a couple of small problems, like the fuse always blowing (120A automatic fuse), fuel delivery problems (Probarbly because of the fuse), and loose nuts and bolts on the suspension... Causing me too damage both the left and right rear sides, rear bumper and front bumper, and too top it off, I blew the rear axle on the start plate in 3rd gear... :ermm:

When I start the car, I need to start rolling the car in 2nd or 3rd gear, or it only spins.. So I started the car in 2nd, gently released the clutch, and press the pedal to the floor, and the car whent off spinning, Changed to 3rd, gently and pushed the pedal and begaun to spin, and PANG :D And the car would not roll any more...

When I got back home, I saw that all the teaths on the ring gear and Pinion gear was completly broken off... :down:

So since that I have prioritised the job, to make mony for the repairs, and tried to get a hold of a new rear axle...

If I find any pictures or videos from the weekend at the "Rudskogen Motorsenter", I will post it here.

Now the time has catched up to me, and the car needs to be ready at the latest 8. may, because this is the first track day for the season... :bunny:

I just found a video from the last day at Rudskogen, and some driving from me... Not the best driving dough... :)

http://www.autobloggen.net/?p=464 (press on the black field under the first texts)

and just some cool driving from crazy Norwegians...

http://www.youtube.com/watch?v=4VIFDTaYJKw...feature=related

I love that tow car :(

Dude... That driftin was crazy! And those Supras? How much power are they running? In Western Australia, there's one Supra who drifts. He's my mate, but he's pretty shit...

Shame about your car getting bashed up though, after all the hard work.

Thanks!

Its only a drift car, so damages do happen in the beginning... And it all can be fixed, only cosmetics...

Yeas, there are a lot of Supras who is drifting here in Norway. The best drifter here in Norway who is call Fredrik "Halllon" Aasbø, is driving a Toyota Supra, and the only thing he has done with the engine is installing SM4 computer injection, and new MSD coils, and boosted the turbo presure... Making around 3-400rwhp I think...

He has also driven the Red Bull World Drift Championship in USA in 2008, and came in on 11th place I think, with a similar Red Supra... And in October 2009, He attended Formula D in the USA, but was beaten by Samuel Hubinette in a Supercharged Dodge Viper...

You can read more here:

http://www.prodriftseries.com/2009/10/27/f...ale-experience/

I love that tow car :(

Dude... That driftin was crazy! And those Supras? How much power are they running? In Western Australia, there's one Supra who drifts. He's my mate, but he's pretty shit...

Shame about your car getting bashed up though, after all the hard work.

  • 7 months later...

Long time since last update, but there has happen a lot lately.

First, I bought a house, and been away for 10 weeks the last 15 weeks on work travel, so no fun there, but overall I have driven three races of the four that has been arranged.

The First one was in Bergen where I live, and I currently have no videos of it. It was a great race, but engine trouble in the days before and during the race day, I did not manage to do well.

First problem was a knocking sound in engine despite having oil pressure, and it started after I had the engine out and back in again. After some trouble shooting, it was that I had managed to change the two lines coming out of the engine, so the flow thru the oil filter was partially blocked. Despite the mistake and trouble, the engine did not take any damage, at least it seems so... :bunny::banana:

On the race day the engine started too go extremely rich on Bank 2 (Right Side of Engine), and it seemed like it was missing a Cylinder or two... I swapped Lambdas to verify the side of engine, checked ECU, Swapped Coil packs from left to right, and tried everything, but the problem was coming and going, and always on right side, so the engine could work fine for one or two rounds, and suddenly in a drift miss a lot of horses... After the finals, I found a faulty wire in the wire harness for right coil pack and cylinder 6 (Number three on right side), made a new signal cable direct from coil too the harness, and It seemed like the problem was gone... But a couple of hours late... :blink::D

The weekend after I was in Oslo, on a Air strip for the Round two of the year, and it was poring down, and the whole weekend went into testing and checking everything, and I made a big mistake of taking it easy in the qualifying rounds, so I did not make it too the top 16... :(

post-51172-1283560503_thumb.jpg

Here is a Video from the race:

The third round was in a remote location outside a town in Norway called Trondheim, and the track was on a small isle, three hour drive out into the Ocean... I was currently on a business trip in Denmark, so I took a flight from Denmark too Trondheim, and I had some friend prepare and take my car up too this remote isle, about 13-14 hour drive from my home in Bergen... Thank you very much guys!!! Could not have done it without you!!!

This round a lot went wrong, the second round on the track ever, I managed too hit a tire on the inside of the first right hand corner, and pulverize my front bumper... Later that day, someone else hit that exact same tire, and flipped over a couple of times, so I think I was lucky...

Later, in the second turn, first Left turn, I went a bit closer to the wall than I wanted, and hit the rear end right into a couple of tires, smashing my rear side, making it 20cm smaller, busting my tail light and so on... not so fun... And one of the times I was twin drifting behind another driver, he stalled in the second turn, but I didn't make the stop, so we hit front on, busting my right headlight, Right front fender, and bent some of the metal in the front, and the bonnet... But the car still worked fine after all the savage... :devil::D:blush:

A picture of the damage:

post-51172-1283560536_thumb.jpgpost-51172-1283560567_thumb.jpg

A couple of videos:

http://www.youtube.com/watch?v=kuFC0mqBY-U

http://www.drifted.com/daniel-hovdahl/even...2001/#more-2001

There was also a car show in Bergen last Weekend, where my Club/Team was responsible for some show and so on, and here is a couple of videos:

The fourth round has also been raced, but I did not attend, since I am out of the country for work and I cant rely on someone else transporting my car, and it was 12-13 hour drive from Bergen each way...

So this was a large update, hopefully I will be better on updating it more often.

See also:

http://www.bergendriftteam.no

http://www.facebook.com/#!/group.php?g...6711&ref=ts

http://www.powerdrift.no

http://www.gatebil.no

  • 2 weeks later...
  • 5 months later...
  • 4 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
    • Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
×
×
  • Create New...