Jump to content
SAU Community

How to Bypass HICAS

Lozza150

By Lozza150,
in Tutorials / DIY / FAQ

 Share

Recommended Posts

  • 3 months later...
Paul SM Collaborator

Paul SM

Posted
Posted
This Link has details of how to bypass HICAS for racing.

http://homepages.tig.com.au/~robs/hicaslock.htm

A very interesting link but it prompts some questions:

Does all of the above apply to R33 GTS-T's, which have a different version of the HICAS to that of the R32's?

If the kit is suitable for R33's, where can it be sourced?

As I run my R33 in supersprints I have at this stage just pulled the fuse on the HICAS system to de-activate it. I did this after installing a full Whiteline suspension kit and it seems to have eliminated most of the feedback I was getting through the steering wheel on fast sweepers - but not all of it. My next move was going to be to take the rack off and simply fit a rigid but adjustable bar in its place. Any thoughts on this?

  • 5 months later...
skyline Collaborator

skyline

Posted
Posted

Paul

Its quite safe to remove the rack(and save about 20kgs in weight) and replace it with billet aluminium plate or fixed tube with threaded ends which you can attach adj rose jointed arms with which you can adj your toe in/out.I have been running full whiteline kit with bilstein coil overs and no hicas for two years now with no side effects,a better handling car and much better tyre life!!!

Regards,

SKYLINE...(Kym).

skyline Collaborator

skyline

Posted
Posted

Paul

Its quite safe to remove the rack(and save about 20kgs in weight) and replace it with billet aluminium plate or fixed tube with threaded ends which you can attach adj rose jointed arms with which you can adj your toe in/out.I have been running full whiteline kit with bilstein coil overs and no hicas for two years now with no side effects,a better handling car and much better tyre life!!!

Regards,

SKYLINE...(Kym).

Paul SM Collaborator

Paul SM

Posted
Posted
Paul

     Its quite safe to remove the rack(and save about 20kgs in weight) and replace it with billet aluminium plate or fixed tube with threaded ends which you can attach adj rose jointed arms with which you can adj your toe in/out.I have been running full whiteline kit with bilstein coil overs and no hicas for two years now with no side effects,a better handling car and much better tyre life!!!

    Regards,

                   SKYLINE...(Kym).

Thanks for your reply, Kym. That's just what I envisaged could be done but so far I haven't really tried to find someone to make it up. I did talk to the suspension guy who installed the Whiteline kit but he thought it was all a bit hard and a race preparation specialist I spoke to looked at it and seemed to think that it wouldn't really be any more effective than switching off the rack and leaving it on the car - but the weight saving is attractive. Do you think your fabricated bar works better than the switched-off rack?

Paul.

GTRgeoff Grand Master

GTRgeoff

Posted
Posted

BigDatto, thanks for the plug.

I found I noticed the rear subframe moving around a bit on track after the lock bar went in so I need pineapples of alloy lock spacers. The fitting is easy but you need a wheel alignment after (just to whiteline specs for toe) and the light will come on but you could pull the dash and remove the globe.

  • 3 weeks later...
Greg Veteran

Greg

Posted
Posted

i fitted one of geoff's lock bars (i recommend it) but now my steering is heavy at low speeds - any ideas why?

previously i had the tomei hicas lock kit. this included a computer unit that u wired into the hicas computer, but i removed this and this is when the problems started.... so everyone else with the lock bar has perfect steering?

  • 1 month later...
BenA31 Experienced

BenA31

Posted
Posted
i fitted one of geoff's lock bars (i recommend it) but now my steering is heavy at low speeds - any ideas why?  

previously i had the tomei hicas lock kit. this included a computer unit that u wired into the hicas computer, but i removed this and this is when the problems started.... so everyone else with the lock bar has perfect steering?

possibly try reconnecting the wires that you spliced for the tomei kit.

when i bought my car, the whole computer at the back had been disconeccted and after i connected it back up the steering was back to normal, as it had been also very heavy as u mentioned. so i suggest trying just connecting the wires back up if u havn't already

  • 1 month later...
TokyoTaxi Veteran

TokyoTaxi

Posted
Posted
This Link has details of how to bypass HICAS for racing.

http://homepages.tig.com.au/~robs/hicaslock.htm

Lozza150,

Couldn't re-find the post you started on HICAS Diagnostics so I was just wondering if you could answer the folloing question. I ran the diagnostic check as you stated to do on an R33 GTS ( non-turbo ) and got the following results:

- 10 fast flashes

- 5 second gap

- 2 long flashes

- 2 short flashes

Any idea what that indicates as faulty ?

Thanks in advance.

  • 1 month later...
Nozila Grand Master

Nozila

Posted
Posted

Ok, Ive also stumbled across a trouble with the hicas but it happened when i installed a ebc - profec a to be exact. Can any shed some light onto why this is happening. I only noticed that the hicas light was on once i installed the ebc and was going to take it for a few runs. The light doesnt seem to go away anymore.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Butters
      WA PITS: Am I screwed?

      By Butters · Posted

      I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Degzy
      WA PITS: Am I screwed?

      By Degzy · Posted

      Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Ozdavroz
      One of these is not like the others 😂

      By Ozdavroz · Posted

      Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...