Jump to content
SAU Community

Recommended Posts

the oil pressure gauge in my 1994 r33 gtst droped to below one yesterday, no warning light came on however. the gauge now varies in oil pressure depending (from what i can gather) on revs. for exaple when i first noticed the oil pressure i was at a set of traffic lights and i only drove it far enough to pull over, as i drove off oil pressure picked up tp about 2/3 and droped again once i took my foot off to about 1 and jus above 0 when i pulled over. in 4th doin about 90kms/h the gauge will read 4ish and then put it in 5th or take my foot off and it slowly drops. oil level is fine as this was the first thing i checked. im going to check the sender unit this weekend and i dont plan on driving the car until this is sorted. please if you have any ideas or know of any common problems with oil pressure with the r33 let me know any help would be much apreciated.

Link to comment
https://www.sau.com.au/forums/topic/224421-low-oil-pressure/
Share on other sites

the oil pressure gauge in my 1994 r33 gtst droped to below one yesterday, no warning light came on however. the gauge now varies in oil pressure depending (from what i can gather) on revs. for exaple when i first noticed the oil pressure i was at a set of traffic lights and i only drove it far enough to pull over, as i drove off oil pressure picked up tp about 2/3 and droped again once i took my foot off to about 1 and jus above 0 when i pulled over. in 4th doin about 90kms/h the gauge will read 4ish and then put it in 5th or take my foot off and it slowly drops. oil level is fine as this was the first thing i checked. im going to check the sender unit this weekend and i dont plan on driving the car until this is sorted. please if you have any ideas or know of any common problems with oil pressure with the r33 let me know any help would be much apreciated.

its normal for oil pressure to rise with the revs.

what oil pressure is it running at idle?

^^^^^ +1

Yep don't rely on standard... well known for faulty readings....

for example... my standard one does not exceed 4 no matter what the conditions... when its hot, at idle it reads slightly off 0!

My blitz mechanical one reads between 6 and 6.5 bar on cold start (idling) .... once warm and driven for a while (ie oil is hot as) idle is 1.5 bar..... I can see the gauge move for everything... ie when the pressure relief valve opens...

its normal for oil pressure to rise with the revs.

what oil pressure is it running at idle?

it sit very close to zero once its warm at idle. i plan to keep it off the road this week until i sevice it the weekend and check the oil pressure with another gauge. that should narrow it down.

sorry for taking so long to reply, have been out of internet access. went and bought a mechanical gauge just to use to try and help work out where the problem was. according to the gauge i have perfect oil pressure and increases perfectly with revs. and on that note im currently in the process of purchasing a good quality aftermarket gauge. thanks heaps for your help.

my sender unit was below the oil filter and to the left a bit. theres a rubber boot covering the plug from it and it just unscrewes out of the block (i managed to get a spanner onto it when i was undoing it, fairly sure it was a 17mm). does anyone know if you can purchase aftermarket sender units? from what ive heard from people who replaced them with the standard one again. find that they play up again anyway.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
×
×
  • Create New...