Jump to content
SAU Community

Recommended Posts

Motul turbolite 10w40 is just a Semi-Syn oil, I would recommend at least a fully synthetic for turbo cleanliness and high temp protection. A wide spread 10w40 type semi-syn is not really a good idea for ring cleanliness i would think. Choose Mobil 0w40 or Delvac 5w40, whichever is cheaper. those are good oil at reasonable prices.

Theres a lot of speculation about what to get lately, is this because of summer?

I am running Mobil 1 5W50 at the moment and was gunna put Motul 10W40 in next month for my routine oil change but your saying its no good for ring cleanliness being semi-synth.

So Delvac 5W40 (If I can find it for sale) or Mobil 0W40 would be better and cost less?

Theres a lot of speculation about what to get lately, is this because of summer?

I am running Mobil 1 5W50 at the moment and was gunna put Motul 10W40 in next month for my routine oil change but your saying its no good for ring cleanliness being semi-synth.

So Delvac 5W40 (If I can find it for sale) or Mobil 0W40 would be better and cost less?

Ok, a wide spread oil like 10w40 Semi-Syn are going to contain loads of VII (viscosity index improver), these VII polymer are weak in nature and will form deposit under high heat & shearing condition. That's not really a good ideal for a hot & fast spinning turbo, do we...

That's why a good Synthetic (naturally multi-grade thus also eliminating the use of VII) with mostly group IV (PAO) or V (polyol ester) base oil will have a performance advantage over any Semi-Syn or mineral oil out there.

Delvac 1 are rumors to be group IV/V blend while Mobil 1 0w40 are PAO/AN blend thus the value.

Edited by Trex101

Motul Turbolight is OK for the money. Some places charge >$40 for a bottle and thats a rip off for a pretty ordinary oil semisynthetic. People get all excited because it has the word "Turbo" in the name and assume its a good oil for turbo based cars. Judging by its OEM/API certifications, its pretty ordinary.

Hello all, im about to do another oil change dropping the 0w-40 castrol edge.

Im leaning towards the motul but which one for the high horse power RB25.

MOTUL 300v chrono 10w-40

MOTUL 300v power 5w-40 or the 5w-30

Busky2k helped me out alot last time with advice, what do you think.

Busky2k knows his stuff like trex.

They might suggest the 10W40 300V from that selection. The a general all rounder and favoured in Oz.

If its street car, daily driver I would be leaning towards a 5w30 300V as like the redline is HTHS and film strength is quite high for a 30wt which better cold start cSt ratings for engine protection.

But ppl in Oz are scared of the "thin" oils...even though most ppl are not clear on what their requirements really are. The US OEM of choice for new cars these days is like 20wt!

If ur car sees any tracks...at least the 40wt IMO.

im using formular R 10w-60 on my GTR and been thinking of going 5w-30 or similar.. havent had problems with the 10w-60 but the price of $55 for a bottle is a bit exy.. just wondering if anyone reckons the swap will be noticable? better fuel economy as its thinner.? GTR doesnt chew oil.. A1 condition.. ;)

0w-40 should cope with heat better than the 5w-30.

the GTR sees no track and is realy a commuter so the 10w-60 is a waste i think..

thanks

mark.

Edited by markimak
im using formular R 10w-60 on my GTR and been thinking of going 5w-30 or similar.. havent had problems with the 10w-60 but the price of $55 for a bottle is a bit exy.. just wondering if anyone reckons the swap will be noticable? better fuel economy as its thinner.? GTR doesnt chew oil.. A1 condition.. :happy:

0w-40 should cope with heat better than the 5w-30.

the GTR sees no track and is realy a commuter so the 10w-60 is a waste i think..

thanks

mark.

I would suggest GC 0w30 for both fuel economy gain & protection but do check for fuel dilution (UOA) if you are running rich AFR.

Edited by Trex101

im using penrite SIn 10w70 in my r32 gtst its ok but after the cars warm and you start it again it seems to get average oil pressure. ill be changing to motul crono 10w40 next oil change the warm ups for that oil could be exciting though... having close neighbours.. and going to work at 5am they'll love the loud rb rumble!

warming a car up by letting it idle is an absolute waste of time. start it, wait 10-15 seconds for the oil to circulate and then drive off gently.

not only that, long idle peroids is bad on ur cyls also. Glazing I think is the correct term.

is german castrol same as castrol.?

would i notice a difference switching from 10w-60 to 5w-30 castrol EDGE?

can someone give some hard evidence on pros and cons on warming it up. im a firm believer of warming the GTR and GTT up. having ceramic turbos and all. saves ur rings. gets the oil closer into the heat range

is german castrol same as castrol.?

would i notice a difference switching from 10w-60 to 5w-30 castrol EDGE?

can someone give some hard evidence on pros and cons on warming it up. im a firm believer of warming the GTR and GTT up. having ceramic turbos and all. saves ur rings. gets the oil closer into the heat range

I noticed the difference when i went from a 10w 60 edge to the 0w 40 edge motor ran cooler and it felt like better acleration.

It's amazing how many placebo feelers there are. Some of you guys have siad it makes the motor run smoother, idles better, turbo spools faster, etc.

Does it make your radio run smoother too? does it make your seat more comfortable?

Honestly, any difference in feel would be hardly able to be felt. It'd be interesting to see if the oil was changed wihtout them knowing what oil is actually in there to see if htey can feel it.

is german castrol same as castrol.?

would i notice a difference switching from 10w-60 to 5w-30 castrol EDGE?

can someone give some hard evidence on pros and cons on warming it up. im a firm believer of warming the GTR and GTT up. having ceramic turbos and all. saves ur rings. gets the oil closer into the heat range

no.

check the link in the origional post.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just don't use ChatGPT or any other artificial stupidity for the equivalent of googling. Their demonstrated inability to discriminate reality from hallucination should be enough to make them totally untrusted. LLMs don't know anything and cannot think to even the smallest extent. They are just predictors of the next word, and that should never be confused with capability.
    • I think, given the usage model described in the OP, I'd never ever experience the wonders of the 400kW upgrade. What I really need is boost from 2000rpm and probably no more than 260-270rwkW. But I suspect that the highflow is not actually the turbo for that purpose, so I may in fact need to get a G25 or 30 or something right sized and very spooly. We shall see after it is tuned. I've had to back the boost and boost ramp off to stop the thing from pinging since the highflow went on, so I've been almost living the NA life for 9 months now! Injectors are recently in hand. AFM is in hand. Dyno is fixed. Just need to clear a queue of f**king Supras out of the way (and probably fit my new gearbox). So....some time this year? Lol.
    • For what I gather is a Sunday/summer car....braided is fine. You're not going to be left without a vehicle and you have plenty of time for inspection/maintenance. Oof. I wouldn't use them that way. They can probably handle the temperature** but the internal corrugations means that their flow characteristics are a bit shit. Lots of extra friction and pressure loss. Makes them flow like the next pipe size down. ** They are stainless, and the stainless can usually be at least something like 304L, which is pretty good at higher temperatures (unlike 316L, which I would use for a wrt/corrosive environment, but not a particularly hot environment). But the welding needs to be top notch. And even then, because you usually need at least one cone-seat end on them (because you can twist the hose and do up both ends at the same time unless one of them is a union) they can be prone to coming loose with heat cycles.
    • I don't have the OEM oil feed lines though and the turbo-wraparound line is torn, only has water. My plan is to get replacements for these and just connect a braided line to there. And make sure it's leak free. Hoses like these are also sometimes used to connect external wastegates, so for an EGR I think you're good using them.
    • Alright I understand. The most likely case is probably gonna be that I just keep the OEM unit in the car as long as it works.
×
×
  • Create New...