Jump to content
SAU Community

Recommended Posts

Mobil 1 is good, although, i think it's an oil that needs more frequent changes than others...

RB's are "lifty" fullstop. Mobil 1 did quiet mine down a bit, Royal Purple made them quieter again... i would probably stay away from "lifter free" sounds horrible.

Good oil, fairly often. Just stick with that :)

hey Gareth :P, i got it from harold, $11.99 per quart, and you need about 6, $71 - i was just putting it into a more friendly measurement, litres instead of quarts. But it's still around $70 for an oil change

6? Do you have an oil cooler or something? 6 * 0.945 (is that was a quart is?) that would be 5.67 litres.

Anyway, you probably did tell me and I have a terrible memory :laugh:

Yes, I don't like the quarts measurement, its confusing.

hm, i change my oil at 5000kms or less. So non frequent changing is not the problem.

Maybe i try the mobile 1 0w-40w. Without lifter free. Might need to look for an alternative oil tho. 0w-40w fully syn around 90 for 5 litres!

Anyway i inform you guys how it goes. =)

changed oil today from quaker state 20-50w to redline 20-50w went for a drive an heat it up pretty good then on idle started to hear a clicking noise(the kind u hear when u switch off an your exh is coolin down) seemed to be commin from the exh side rocker cover. Car has done 120000km an never heard this before. Any suggestions as to what this might be? By the way its not a constant noise it comes an goes.

yea.. agreed..!

I got told before to use 10/60, buy a guy at repco before...

He said if i used anything lower, my engine would be destroyed............................................................

I smiled and walked off. Lol!

  • 3 weeks later...

Hey guys, Just some feedback on this thread. Took the advice of the blokes here and the mobile one gold 0-30 worked great. Unfortunatly Its too good and I felt the engine was moving too freely and it was to thin.

Now have moved onto motul 5-40 I think xcess 8100 and its pretty good stuff. BTW oil change at 10,000km on the skyline with mobil gold came out slightly deep gold so its good for awhile id say (no oil cooler and yes I gave it a nice run)

Hope that helps some people, I just felt the 0 weight was too thin and would give too much unwanted engine wear.

yeah, Castrol Syntec is their true synthetic oils... and surprise surprise, you can't buy it off the shelf here... well, not that i know about.

I would stick with the german 0w30 though.... i've heard a lot of reports that the American stuff is actually Group III, but Castrol decided they wouldn't tell anyone... :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I believe there was a similar one posted by @duggyphresh. They were re-routing their battery positive cable in the way I am also trying to achieve. Sorry, I’m new to this forum, so was a bit late to the party by a few months and so reignited the old thread, as I wanted to know how they got on with doing it.
    • Wasn't there a thread on this very subject just a few weeks ago?
    • Hi all! Looking to relocate the battery to the trunk of an R34 GTT. I want to do it using as many stock GTR components as I can (including the harness protectors from the 34 GTR that run underneath along the chassis to the engine bay). So far I’ve purchased the battery tray from a 33 GTR, as the captive weld nuts are already there just asking to be used. There is also the slight issue of now having to relocate the ABS/TC/Fuel Pump Control ECU, which in GTT’s sits right above where the battery will then sit on the tray. Has anyone already achieved this, and if you have any pics that you wouldn’t mind sharing? It would be great to see how others have done it and where you put them, as there are countless holes in the parcel shelf panel to potentially use. Just trying to get some ideas bounced around, and to help uncover any potential problems I may encounter by  my choice of location. TIA for any help!
    • Brand was ard.   I also threw a brand new battery at it and beefed up the wire from the alternator to battery and added an extra earthing point from the battery 
    • Evening all,       I'm replacing some bolts on my RB25 with probolt Australia bolts.       Does anyone know the following, m5 m6 etc 10mm 20mm etc       Coil cover   Cam covers   Plazamaman fuel rail   Front cover (timing cover)   Etc   Any help would be awesome   Or any lists anywhere
×
×
  • Create New...